Instruction/ maintenance manual of the product AM16629-1 Zebra Technologies
Go to page of 12
AM16629-1 Rev . C pg. 1 of 12 INST ALLA TION INSTR UCTIONS READ THIS MANUAL CAREFULL Y! F AILURE TO INST ALL THIS EQUIPMENT PER THESE INSTRUCTIONS WILL VOID THE W ARRANTY.
pg. 2 of 12 AM16629-1 Rev . C SPECIAL NOTICES The following notices emphasize certain information in the guide. Each serves a special purpose and is displayed in the format shown: Note: Note is used to emphasize any significant information. Caution: Indicates information that, if not followed, can result in damage to software, hardware, or data.
AM16629-1 Rev . C pg. 3 of 12 INTRODUCTION NOTE: Zebra technologies Corporation is not liable for personal injury or damage to any equipment caused by the improper installation of this equipment to any power sour ce.
pg. 4 of 12 AM16629-1 Rev . C T ools Required • An electrical drill, drill bits 1/4”(6 mm)) • T aps-1/4-20 and #6-32 (M6 and M3). • Common hand tools.
AM16629-1 Rev . C pg. 5 of 12 Figure 1 Standard Mounting Configurations height width depth depth w/ bin 21.32” 1 1.63” 8.2” 1 1.07” 54.2 29.5 20.83 28.1 height width depth depth w/bin 14.30* 1 1.63 15.65 18.00 36.32* 29.5 39.75 45.72 * includes minimum clearance for access to controls (RF) rather than cables.
pg. 6 of 12 AM16629-1 Rev . C It is important to leave a free zone around the printer to allow loading of paper and routine cleaning of the print head. Refer to Figure 2. In addition, the Mobile Mount allows for some rotation of the printer to allow the best positioning for the operator .
AM16629-1 Rev . C pg. 7 of 12 11.00" 8.63" 2.01" 2.75" 1.82" 0.31" 0.31" Dia. x4 0.31" Use a 1/4” (6 mm) drill bit to make mounting holes. Secure the mount with nuts, bolts, and lock washers. Refer to Figure 2 for details on mounting dimensions.
pg. 8 of 12 AM16629-1 Rev . C PRINTER INST ALLA TION Printer Preparation Prepare the printer for installation by doing the following: • If your printer has a carrying strap, you must remove it by the following procedure (Refer to Figure 4) : 1. Unscrew the (2) #4-40 x 1” screws holding the top corners of the printer together .
AM16629-1 Rev . C pg. 9 of 12 Printer Installation The QL 420 Printer can now be installed in the Mobile Mount. Secure the printer to the Mobile Mount Bracket with (4) #8-32 x 3/8” Screws, Lock W ashers and Flat W ashers. (See Figure 5). Plug the output voltage cable from the Mobile Charger into the bottom of QL 420 Printer .
pg. 10 of 12 AM16629-1 Rev . C Attaching the Fanfold Bin If the printer will be using fanfold media, you must install the fanfold bin to the Mobile Mount.
AM16629-1 Rev . C pg. 11 of 12 Connect the Printer • Plug the output cable from the Charger to the battery connection on the printer . (Re- fer to the QL 420 User ’ s Manual for more information.) If you are using a MMQ4 Mobile mount, it may be easier to plug in the charger connector before mounting the Printer to the Mobile Mount bracket.
AM16629-1 rev. C 8/12/2003 TECHNICAL SUPPORT U.S. ONL Y Zebra maintains a help line for questions involving installation of the MMQ4 Mobile Mount. Please have as much information as possible regarding your particular application ready when you call to enable the technical support personnel to help you.
An important point after buying a device Zebra Technologies AM16629-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zebra Technologies AM16629-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zebra Technologies AM16629-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zebra Technologies AM16629-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Zebra Technologies AM16629-1 will certainly help you make a decision on the purchase.
If you already are a holder of Zebra Technologies AM16629-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zebra Technologies AM16629-1.
However, one of the most important roles played by the user manual is to help in solving problems with Zebra Technologies AM16629-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zebra Technologies AM16629-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
