Instruction/ maintenance manual of the product ZWN 1220 W Zanussi
Go to page of 28
W ASHING MACHINE ZWN 1220 W ZWN 1420 W ZWN 1420 G Synthetics Delicates Cottons Wool 60°C 40°C 30°C Cold 1200 900 700 500 R i n s e s D r a i n S p i n W a s h P r e w a s h Z W N 1 2 2 0 W Delay On.
2 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to.
3 Contents F or the User Important Safety Infor mation 2 Y our New W ashing Machine 4 Description of the Appliance 5 Detergent dispenser drawer 5 Door locked light 5 Child safety feature 5 The Control.
4 Y our New W ashing Machine Y our new washing machine, which is fitted with the New Jet System, meets all modern requir ements for ef fective treatment of laundry with low water , energy and deter gent consumption.
5 Description of the Appliance 1 Detergent dispenser drawer 2 Control panel 3 Door locked light 4 Door opening handle 5 Filter 6 Adjustable feet Door lock ed light It stays on during the whole programme indicating that the door is locked. When the light goes out, the door can be opened (see page 13).
1 “On/Off ” button Press this button to switch the washing machine on. The display (8) will show three flashing dashes or a flashing zero. Y ou will find more detailed explanations on pages 7-8 (see “Display”). Press the On/Off button again to switch the machine of f.
7 As all spinning phases are suppressed, this washing cycle is very quiet and it can be useful at night or in times with a more economical power rate. On cotton and synthetic programmes the rinses will be performed with more water .
• Delay start , a time value indicated in hours and selected by means of the relevant button (max 23 hours). The delay time is displayed for 3 seconds, then the duration of the selected programme reappears.
9 9 “Star t/Pause” button This button has two functions: • S tart : after you have selected the desired programme and options, press this button to start the washing machine.
10 T o select Drain only , press the “ Skip ” button three times, the wash - rinses - spin LED,s go out. The drain LED only remains alight. 11 “Dela y” button This button makes it possible to delay the starting of the programme selected from 30 min - 60 min - 90 min, 2 hours and then by 1 hour up to a maximum of 23 hours.
11 Operating Sequence Before the first wash, we recommend that you run a cotton cycle at 95°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment of the dispenser drawer and start the machine.
12 The relevant light will light up. 7. Select the spin speed or the Night Cycle option Press the “ Spin Speed ” button repeatedly , in order to select the desired spin speed or the Night Cycle option.
13 11. Star t the pr ogr amme Press the “ S tart/Pause ” button. The relevant light will stop flashing and only the light relevant to the phase that is in progress will remain lit. If you have chosen a delayed start, the washing machine will begin the countdown.
14 W ashing Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Shee.
15 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer .
16 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine.
17 W ashing pr ogrammes ZWN 1220 W - ZWN 1420 W - ZWN 1420 G * This data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry , the temperature of the water supply and the ambient temperature.
18 18 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
19 Release the emergency emptying hose, place it in the container , and remove its cap by unscrewing it. When no more water comes out, unscrew the filter and remove it. Clean the filter under a running tap, then refit it, screwing it fully in. Put the cap back on the emergency emptying hose, place the latter back in its seat.
20 The door will not open ● The water level is above the bottom edge of the door . ● The machine is heating the water . ● The drum is turning. In any case, the door can only be opened when the relevant light has gone out.
Symptom Possible causes 21 21 Spinning starts late or the machine does not spin ● The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum. The laundry is redistributed by reverse rotation of the drum.
22 22 Guarantee Conditions Standar d guar antee conditions W e, Zanussi Electrolux, undertake that if, within 12 months of the date of the purchase, this ZANUSSI ELECTROLUX appliance or any part there.
23 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
24 24 Unpacking All transit bolts and packing must be removed before using the appliance. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using the spanner supplied with the appliance, unscrew and remove the two rear bottom screws.
25 W ater inlet Connect the hose to a tap with a 3/4” thread. Do not use already employed hoses. Always use the hose supplied with the appliance to connect to the water supply . Installation should comply with local water authority and building regulations’ requirements.
26 2. Onto a sink outlet spigot. If the outlet spigot has not been used before, remove any blanking plug that may be in place. Push the drain hose onto the spigot and secure with a clip if required, ensure a loop is formed in the drain hose (see diagram) to prevent waste from the sink entering the washing machine.
27 27 If you require any further advice please contact your local water authority . Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED.
© Electrolux plc 2005 From the Electr olux Group. The world’ s No. 1 choice . The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use.
An important point after buying a device Zanussi ZWN 1220 W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZWN 1220 W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZWN 1220 W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZWN 1220 W you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZWN 1220 W will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZWN 1220 W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZWN 1220 W.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZWN 1220 W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZWN 1220 W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
