Instruction/ maintenance manual of the product ZWJ 12591 W Zanussi
Go to page of 28
EN User manual Washing Machine ZWJ 12591 W ZWJ 14591 W.
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Washing programmes _ _.
• If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely under the appliance. • Always be sure, that there is no water leakage from ho- ses and their connections after the installation.
1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adju stable fe et 1 2 3 4 5 6 Detergent dispenser drawer Compartment for detergent used for prewash and soak phase or for stain remover used during the stain action phase (if available).
1 2 3 4 5 6 7 8 10 9 1 Programme selector dial 2 SPIN reduction button 3 SOIL LEVEL button: – Heavy – Light 4 PREWASH button 5 EXTRA RINSE button 6 ECONOMY button 7 Display 8 START/PAUSE button 9 .
Extra Rinse This appliance is designed to save energy. If it neces sary to rinse the laundry using an extra quantity of water (extra rinse), select this option. Some additional rinses will be performed. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.
Delayed start The delay set appears for a few seconds, then the display show again the duration of the set programme. The delay time value decreases by one unit every hour and then, when 1 hour remains, every minute. Alarm co des In the event of operating problems, some alarm codes can be displayed, for example (see paragraph «What to do if.
Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Type of Laundry Options Detergent Compartment Cycle time duration, energy and water consumption are proportional to the amount of load. 1) If you select the ‘LIGHT’ option (button 3 ), we recommend that you reduce the maximu m load as indicated.
Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Comp artment Wool - Hand wash 40° - 30° - Cold Main wash - Rinses Maximum spin speed at 900 rpm Max.
Programme Maximum and Minimum Temperature Cycle Description Maximum Spin Speed Maximum Fabrics Load Type of Laundry Options Detergent Compartment = OFF For cancelling the programme which is running or to switch the machine off .
• liquid detergents, preferably for low temperature wash programmes (60°C max) for all types of fabric, or spe- cial for woollens only. The detergent and any additives must be placed in the ap- propriate compartments of the dispenser drawer before starting the wash programme.
Daily use Load the laundry Open the door by carefully pulling the door handle outwards. Place the laun- dry in the drum, one item at a time, shaking them out as much as possible. Close the door. Make sure that no laundry stays between the seal and the door.
Select the Delay Start by pressing button 8 Before you start the programme, if you wish to delay the start, press this button to select the desired delay. The selected delay time value will appear on the display for a few seconds, then the duration of the programme will appear again.
Stand by : once the programme has finished after a few minutes the energy saving system will be enabled. The brightness of the display is reduced. By pressing any but- ton the appliance will come out of the energy saving sta- tus.
Open the pump door. Put a container below the recess of the drain pump to collect the water that flows out. Press the two levers and pull forward the drainage duct to let the water flow out. When the container is full of water, put the drainage duct back again and empty the container.
Cleaning th e water inle t filters Important! If the appliance doesn't fill, takes long to fill with water, the starting button blinks yellow or the display (if available) shows the relevant alarm (see chapter "What to do if..." for more details), check if the water inlet filters are blocked .
2. Start the programme to drain the water. What to do if… Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
Problem Possible cause/Solution The machine does not empty and/or does not spin: The drain hose is squashed or kinked. • Check the drain hose connection. The drain filter is clogged. • Clean the drain filter. An option or a programme that ends with the water still in the tub or a that eliminates all the spinning phases has been selected.
Problem Possible cause/Solution The machine vibrates is noisy: The transit bolts and packing have not been removed. • Check the correct installation of the appliance. The support feet have not been adjusted • Check the correct levelling of the appliance.
Water supply pressure Minim um Maxi mum 0,05 MPa 0,8 MPa Maximum Load Cotton 8 kg Spin Speed Maxi mum 1200 rpm (ZW J12591 W) 1400 rpm (ZWJ14591 W) Consumption values Programme 1) Energy consumption (KWh) 2) Water consumption (litre) 2) White Cottons 95 °C 2.
Unscrew the three bolts. Slide out the relevant plas- tic spacers. Open the porthole and re- move the polystyrene block fitted on the door seal. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet.
The other end of the inlet hose which connects to the appliance can be turned as showed in the picture. Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap. Set the hose correctly by loosening the ring nut.
If the outlet spigot has not been used before, remove any blanking plug that may be in place. Push the drain hose onto the spigot and secure with a clip, ensure a loop is formed in the drain hose (see above) to prevent waste from the sink enter- ing the appliance.
your local council, your household waste disposal service or the shop where you purchased the product. Packaging materials The materials marked with the symbol are recyclable.
25.
26.
27.
www.zanussi.com/shop 132935920-A-202011.
An important point after buying a device Zanussi ZWJ 12591 W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZWJ 12591 W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZWJ 12591 W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZWJ 12591 W you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZWJ 12591 W will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZWJ 12591 W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZWJ 12591 W.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZWJ 12591 W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZWJ 12591 W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
