Instruction/ maintenance manual of the product ZWH3125 Zanussi
Go to page of 25
ZWH3105 ZWH3125 126.2936.39…ZWH3105-3125.qxd 24/10/08 09:01 Página 1.
29 Content Safety information - - - - - - - - - - - - - - - - - -30 Description of the appliance - - - - - - - - - - -32 Detergent dispenser drawer - - - - - - - - - - -32 Control panel and functions .
30 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully , including its hints and warnings.
31 Use ● This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed. ● Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label. ● Do not overload the appliance.
32 Description of the appliance Detergent dispenser drawer Control panel Door opening handle Drain pump Adjustable feet 5 4 3 2 1 Detergent dispenser drawer Prewash W ash Fabric Softener 126.
33 Control panel and functions 5 1 3 2 4 6 7 8 Programme selector dial and On/Off switch T emperature selector Spin reduction button Options button AquaCare button Start/Pause button Programme progress display Delay Start button 8 7 6 5 4 3 2 1 126.2936.
34 Programme table Programme T ype of laundry Options Cotton 90º- White or colored, for example, workcloths, bedcloths, tablecloths, etc Spin red., Rinse Hold, , AquaCare, Daily , Quick, SuperQuick Spin Red., Rinse Hold, , AquaCare Cotton Eco 60º - 40º White or colored, for example, t-shirts, bedcloths little soiled, etc Spin Red.
35 W ashing hints Sorting the laundry Follow the wash code symbols on each garment label and the manufacturer ’ s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. T emperatures Before loading the laundry Never wash whites and coloureds together .
36 Rust: oxalic acid dissolved in hot water or a rust removing product used cold. Be careful with rust stains which are not recent since the cellulose structure will have already been damaged and the fabric tends to hole. Mould stains: treat with bleach, rinse well (whites and fast coloureds only).
37 Before the first use W ARNING! Ensure that the electrical and water connections comply with the installation instructions. IMPORT ANT! Remove the polystyrene block and any material from the drum. IMPORT ANT! Pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve.
38 5. Select the required temperature. T urn the temperature selector dial to select the washing temperature. Maximum temperatures are 90°C for cottons, 60°-50°C for synthetic fabrics and jeans, 40°C for delicate fabrics, wool and fabrics to be hand-washed.
39 IMPORT ANT! If an option is chosen that is not allowed with the selected programme, the red pilot light of the Start/Pause button will flash 3 times.
40 Cancelling a programme T urn the selector dial to Off to cancel a programme which is running. Now you can select a new programme. Opening the door after the programme has started First set the machine to pause by pressing the Start/Pause button. If the «Door» light flashes and after 2 minutes goes off, the door can be opened.
41 IMPORT ANT! Y ou must DISCONNECT the appliance from the electricity supply , before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
42 ● Screw the lid of the diaphragm clockwise, be sure is completely tighten. ● Close the drainage area door . IMPORT ANT! When the appliance is in use and depending on the programme selected there can be hot water in the pump.
43 Malfunction Possible Cause / Solution The washing machine does not start: The door has not been closed. (Red Start/Pause pilot light flashes) • Close firmly the door . The plug is not properly inserted in the power socket. • Insert the plug into the power socket.
44 Malfunction Possible Cause / Solution The machine fills then empties immediately: The end of the drain hose is too low . • Refer to relevant paragraph in «water drainage» section. The machine does not empty and/or does not spin: The drain hose is squashed or kinked.
45 The machine vibrates or is noisy: The transit bolts and packing have not been removed. • Check the correct installation of the appliance. The support feet have not been adjusted. • Check the correct levelling of the appliance. The laundry is not evenly distributed in the drum.
46 Consumption values Infos The consumption data shown on this chart is to be considered purely indicative, as it may vary depending on the quantity and type of laundry , on the inlet water temperature and on the ambient temperature. It refers to the highest temperature for each wash programme.
47 Installation instruction T ransit security bars Before starting the machine up, the transport security bars must be removed as follows: Y ou are advised to keep all the transport security bars. In case the appliance has to be transported again. 1. Unscrew and remove the three rear screws by means of a key .
48 W ater inlet There should be a COLD W A TER tap near the washing machine with a screwing on connection pipe of 3/4" for the water supply , a sink, a wash basin or a drainage system in the wall. Previously check if: - it is not a hot water tap.
49 Environmental concerns Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers.
50 Guarantee conditions Standard guarantee conditions We, Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux appliance or any part thereof is proved to be defec.
51 www .electrolux.com 126.2936.39…ZWH3105-3125.qxd 24/10/08 09:01 Página 51.
126.2936.39 www .electrolux.com www .zanussi.es 126.2936.39…ZWH3105-3125.qxd 24/10/08 09:01 Página 52.
An important point after buying a device Zanussi ZWH3125 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZWH3125 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZWH3125 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZWH3125 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZWH3125 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZWH3125, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZWH3125.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZWH3125. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZWH3125 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
