Instruction/ maintenance manual of the product ZWF 81260 W LINDO 300 Zanussi
Go to page of 20
EN ZWF 81260W ZWF 81460W User Manual Washing Machine.
Contents Safety information 2 Safety Instructions 3 Product description 4 Control panel description 5 Programme Chart 5 Consumption values 7 Options 8 Settings 9 Before first use 9 Daily use 9 Hints and tips 12 Care and cleaning 13 Technical Data 14 Troubleshooting 15 Subject to change without notice.
• The ventilation openings in the base (if applicable) must not be obstructed by a carpet. • The appliance is to be connected to the water mains using the new supplied hose-sets.
Use WARNING! Risk of injury, electrical shock, fire, burns or damage to the appliance. • Use this appliance in a household only. • Obey the safety instructions on the detergent packaging. • Do not put flammable products or items that are wet with flammable products in, near or on the appliance.
Control panel description 90° 60° 40° 30° Synthetics Cottons Mix 20° Delicates Duvets Wool/Handwash 1400 1200 800 Intensive Easy Iron Rinse Only Drain & Spin Cotton ECO Quick Delay Start 8 7 .
Programme Temperature range Programme description (Type of load and soil level) Maximum load Maximum spin speed Delicates 40 °C - Cold Delicate fabrics as acrylics, viscose, polyester items .
Programme Qui ck 1) In- ten- siv e Easy Iron Rinse Only Drain & Spin Mix 20° ■ ■ ■ ■ ■ ■ ■ 1) When you set this option, we recommend that you decrease the quantity of the laundry. It is possible to keep the full load but the washing results can be unsatisfactory.
Off Mode (W) Left On Mode (W) The information given in the chart above are in compliance with the EU Commission regulation 1015/2010 implementing directive 2009/125/EC. Options Temperature With this option you can change the default temperature. Indicator = cold water.
Use this option for persons allergic to detergents and in areas where the water is soft. The related indicator comes on. 1 Settings Extra Rinse With this option you can permanently have an extra rinse when you set a new programme. • To activate/deactivate this option touch the buttons and at the same time until the indicator comes on/goes off .
Using detergent and additives 1. Measure out the detergent and the fabric conditioner. 2. Carefully close the detergent drawer. Detergent compartments Detergent compartment for wash- ing phase. If you use liquid detergent, put it immediately before you start the programme.
If you set something incorrect, the indicator of the button flashes red three times. Starting a programme without the delay start Touch the button . • The indicator of the button stops to flash and stays on. • The programme starts, the door locks, the indicator is on.
The washing programme is completed, but there is water in the drum: • The drum turns regularly to prevent the creases in the laundry. • The indicator flashes to remind you to drain the water. • The door lock indicator is on. The indicator of button flashes.
– liquid detergents, preferably for low temperature wash programmes (60 °C max) for all types of fabric, or special for woollens only. • Do not mix different types of detergents. • To help the environment, do not use more than the correct quantity of detergent.
3 4 5 6 Cleaning the inlet hose and the valve filter 1 2 3 1 2 3 45° 20° 4 Frost precautions If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. Do this procedure also when you want to do the emergency drain.
Level of protection against ingress of solid particles and moisture ensured by the protective cover, except where the low voltage equipment has no protection against moisture IPX4 Water supply pressur.
Problem Possible solution The appliance does not fill with water properly. • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • Make sure that the water tap is not clogged.
After the check, activate the appliance. The programme continues from the point of interruption. If the problem occurs again, contact the Authorised Service Centre. If the appliance shows other alarm codes (the indicator of button flashes in red). Deactivate and activate the appliance.
18 www.zanussi.com.
www.zanussi.com 19.
www .zanussi.com/shop 192974350-A-072014.
An important point after buying a device Zanussi ZWF 81260 W LINDO 300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZWF 81260 W LINDO 300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZWF 81260 W LINDO 300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZWF 81260 W LINDO 300 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZWF 81260 W LINDO 300 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZWF 81260 W LINDO 300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZWF 81260 W LINDO 300.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZWF 81260 W LINDO 300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZWF 81260 W LINDO 300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
