Instruction/ maintenance manual of the product ZWF 12380W Zanussi
Go to page of 28
EN User manual 2 Washing Machine ZWF 12380W ZWF 14380W.
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 First use _ _ _ _ _ _ _ _ _ _ .
• Always be su re, that the re is no wate r leakage from hoses and their connections after the installation. • If the applianc e is installed in a location s ubject to frost, please read th e “dangers of freezi ng” chapter.
Product description 1 Detergent dispenser drawer 2 Control pa nel 3 Door opening handle 4 Rating plate 5 Drain pump 6 Adjustable feet 1 2 3 4 5 6 Detergent dispenser drawer Compartment for deterge n t used for p rewash an d soak phase or f or stain remove r used during the stain action pha se (if avail able).
1 2 3 4 5 6 7 8 1 Programme select or dial 2 SPIN reduction button 3 OPTIONS button 4 EXTRA RINSE button 5 Display 6 START/PAUSE button 7 DELAY START button 8 Indicator pilot lights Table of symbols N.
Super Quick Short cycle for lightly s oiled items or for laundry which needs only freshen ing up. We reco mmend you to reduc e the fabrics loading. Extra Rinse This appli ance is design ed for saving energy. I f it neces- sary to rinse the laundry using an extra quantity of w ater (extra rinse), selec t this option.
• Heating phase During the washing c ycle the display show s a temper- ature icon to indic ate that the appliance has started the heating phase of the water in the tub. 5.3: • Child safety lock This device pe rmits you to leave the appl iance unat- tended during it's functioning.
Pull out the dispenser drawer until it stops. Me asure out the amount of detergent required, pour it into the main wash compartme nt or in the appropriate com- partment if the selecte d programme/option it require s (see more details in "D etergent dispense r drawer").
Altering an option or a running programme It is possi ble to chan ge so me options before the pro- gramme carries them out. Before yo u make any change , you must PAUSE the ap- pliance by pre ssing the button 6 . Changing a running progr amme is possible only by re- setting it.
Removing stains Stubborn s tains may no t be removed by just water and detergent. It is therefore advi sa ble to treat them prior to washing. Blood: tre at fresh stains with c old water. For dried stains, soak overnight in wate r with a special detergent the n rub in the soap a nd water.
Washing programmes Programme - Maximum and Mi nimum Temperature - Cycle Descriptio n - Maximum Spin Speed - Maximum Fa brics Load - Type of Laundry Options Detergen t drawer Cottons 90° Main wash - Rinses Maximum spin speed 1200 rpm for mode l ZWF 12380W (1400 for model ZWF 14380W ) Max.
Programme - Maximum and Mi nimum Temperature - Cycle Descriptio n - Maximum Spin Speed - Maximum Fa brics Load - Type of Laundry Options Detergen t drawer Synthetics 50° - 40° Main wash - Rinses Maximum spin speed at 900 rp m Max.
Programme - Maximum and Mi nimum Temperature - Cycle Descriptio n - Maximum Spin Speed - Maximum Fa brics Load - Type of Laundry Options Detergen t drawer Spin Drain a nd long s pin Maximum spin speed 1200 rpm for mode l ZWF 12380W (1400 for model ZWF 14380W ) Max.
Programme - Maximum and Mi nimum Temperature - Cycle Descriptio n - Maximum Spin Speed - Maximum Fa brics Load - Type of Laundry Options Detergen t drawer Sport Shoes 40° Main wash - Rinses Maximum spin speed at 900 rp m Max. load: 1 pair of shoes With this programme it is possib le to wash one pair of s port shoes (or 2 pairs if they are smal l).
Problem Possible cau se/Solution The machine do es not start : The door has not been closed . • Close the door firmly. The plug is not properly in serted in the power socket. • Insert the plug into the power socket. There is no power at the socket .
Problem Possible cau se/Solution There is water on the floor: Too much de tergent or unsuita ble deterg ent (creates too much foam) has been used. • Reduce the detergent quanti ty or use another one. Check whether the re are any leaks from on e of the inlet hose fittings.
Problem Possible cau se/Solution Spinning starts late or the ma chine does not spin: The electronic unbala nce detection devic e has cut in becaus e the laundry is not evenly distributed in the drum. The laundry is redistribu ted by reverse rotation of the drum.
Consumption values Programme Energy consumption (KWh) Water consumption (litres) Programme duration (Mi- nutes) White Cottons 90° 2,2 65 For the duration of the pro- grammes, plea se refer to the display o n the contro l panel. Cottons 60° 1.4 62 Cotton ECO 60° 1) 1,19 52 Cottons 40° 1,2 57 Synthetics 40° 0.
Replace the drawer and run the ri nse programme with- out any clot hes in the drum . Cleaning the pump The pump should be inspected if: • the machine does not empty and/or spin; • the machine makes an unu sual noise during draining due to objec ts such as safety pins, co ins etc.
• Unscrew the hose from the mac hine. Keep a rug nearby becau se some water may flow. • Clean the filte r in the valve w ith a stiff brush or with the piece of cloth. 35° 45° • Screw the hos e back to the mach ine and make sure the connection is tight.
Unscrew the three bolts . Slide out th e relevant pla s- tic spa cers. Open the porthole an d re- move the polystyrene block fitted on the door seal. Fill the smaller upper hole and the two large ones with the correspondi ng plastic plu g caps supplied in the bag containing the instruction booklet.
Warning! Installation s hould comply with local water authority and buil ding regulations’ requiremen ts. The applian ce must be connec ted to a cold wate r supply. A minimum water pre ssure of 0.05 MPa (0.5 bar) is required for safe ope ration of the appliance.
protrude a f ew centimetres b eyond the ed ges of the ap - pliance. Warning! The appliance should NOT b e placed on deep pile carpeting. Note! Please ens ure that when the applianc e is installed it is easily acces sible for the engineer in the e vent of a breakdown.
for the required load in com pliance with the current elec- trical reg ulation s. The switch must not break the y ellow and green earth cable at any poin t. Environment concerns The symbol on the product or on its packaging indicates that this produc t may not be treate d as household waste.
25.
26.
27.
www.zanuss i.com 192994970 - 00 - 2320 09.
An important point after buying a device Zanussi ZWF 12380W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZWF 12380W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZWF 12380W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZWF 12380W you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZWF 12380W will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZWF 12380W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZWF 12380W.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZWF 12380W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZWF 12380W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
