Instruction/ maintenance manual of the product ZWF 10070W1 Zanussi
Go to page of 32
User manual W ashing Machine ZWF 10070W1 ZWF 12070W1 ZWF 14070W1 126.2936.42…ZWF10070-12070-14070.qxd 14/7/08 12:59 Página 1 Por Susana Ruiz Moreno fecha 13:26 , 14/07/2008.
2 Content Safety information - - - - - - - - - - - - - - - - - - -3 Description of the appliance - - - - - - - - - - - -5 Detergent dispenser drawer - - - - - - - - - - - -5 Control panel and function.
3 Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully , including its hints and warnings.
4 Use ● This appliance is designed for domestic use. It must not be used for purposes other than those for which it was designed. ● Only wash fabrics which are designed to be machine washed. Follow the instructions on each garment label. ● Do not overload the appliance.
5 Description of the appliance Detergent dispenser drawer Control panel Door opening handle Drain pump Adjustable feet 5 4 3 2 1 Detergent dispenser drawer Prewash W ash Fabric Softener 126.
Control panel and functions 6 Programme selector dial and On/Off switch ● The programme selector dial allows you to select a programme and/or to switch the machine on/off. It can be turned either clockwise or anticlockwise. The light Start/Pause light starts to flash.
7 Programme table Max load for Cottons ..................................6 kg Max load for Synthetics..............................3 kg Max load for Delicates ..............................3 kg Cottons 90º C White cotton (heavily soiled cotton items): e.
8 Programme table Max load for Wool/Handwash .............................. 2 kg Max load for Mini 30‘ .......................................... 2.5 kg Max load for Silk ....................................................1 kg Max load for Sport Shoes 40 ° .
9 Programme information Rinse With this programme it is possible to rinse and spin cotton garments which have been washed by hand. The machine performs 3 rinses, followed by a final spin at maximum speed. The spin speed can be reduced by depressing Spin button.
10 W ashing hints Sorting the laundry Follow the wash code symbols on each garment label and the manufacturer ’ s washing instructions. Sort the laundry as follows: whites, coloureds, synthetics, delicates, woollens. T emperatures Before loading the laundry Never wash whites and coloureds together .
11 Oil based paint: moisten with benzine stain remover , lay the garment on a soft cloth and dab the stain; treat several times. Dried grease stains: moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips and a cotton cloth.
12 Quantity of detergent to be used The type and quantity of detergent will depend on the type of fabric, load size, degree of soiling and hardness of the water used. W ater hardness is classified in so-called «degrees» of hardness. Information on hardness of the water in your area can be obtained from the relevant water supply company .
13 Operating sequence 1. Load the laundry Open the door by carefully pulling the door handle outwards. Place the laundry in the drum, one item at a time, shaking them out as much as possible. Close the door . 2. Measure out the detergent and the fabric softener Pull out the dispenser drawer until it stops.
14 Operating sequence Cotton, Synthetic, Delicates, Silk, Sport Shoes 40°, and Sport 40° programmes the rinses will be performed with more water . When the programme has finished the «Door» and «End» pilot lights are lit,, the Start/Pause and «W ash» lights are off and the door is locked to indicate that the water must be emptied out.
15 Operating sequence The «W ash» and «Door» lights are lit to indicate that the appliance starts operating and the door is locked. To interrupt a programme which is running, depress the Start/Pause button: the corresponding green pilot light starts to flash.
16 Altering an option or a running programme It is possible to change any option before the programme carries it out. Before you make any change, you must pause the washing machine by pressing the Start/Pause button. Changing a running programme is possible only by resetting it.
17 IMPORT ANT! Y ou must DISCONNECT the appliance from the electricity supply , before you can carry out any cleaning or maintenance work. Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
18 ● Screw the pump cover fully in. ● Close the pump door . IMPORT ANT! When the appliance is in use and depending on the programme selected there can be hot water in the pump. Never remove the pump cover during a wash cycle, always wait until the appliance has finished the cycle, and is empty .
19 Malfunction Possible Cause / Solution The washing machine does not start: The door has not been closed. (Red Start/Pause pilot light flashes) • Close the door firmly . The plug is not properly inserted in the power socket. • Insert the plug into the power socket.
20 Malfunction Possible Cause / Solution The machine fills then empties immediately: The end of the drain hose is too low . • Refer to relevant paragraph in «water drainage» section. The machine does not empty and/or does not spin: The drain hose is squashed or kinked.
21 The machine vibrates or is noisy: The transit bolts and packing have not been removed. • Check the correct installation of the appliance. The support feet have not been adjusted. • Check the correct levelling of the appliance. The laundry is not evenly distributed in the drum.
22 T echnical data Dimensions Width 60 cm 85 cm 63 cm Height Depth (including the porthole) W ater supply pressure Minimum 0,05 MPa 0,8 MPa Maximum Cotton Synthetics Delicates Woollens and handwash Ma.
23 Consumption values Programme duration (in minutes) Programme Energy consumption (in kWh) Wa te r consumption (in litres) 125 Cottons 95°C 2.0 61 Cottons 60° Eco( * ) ZWF10070/12070W1…1.02 ZWF14070W1…………1.14 100 155 Cottons 60°C - 40°C 1.
24 Installation instruction T ransit security bars Before using the appliance, all transit bolts and spacers must be removed. Y ou are advised to keep all transit devices in case the appliance has to be transported again. Proceed as follows: 1. Unscrew and remove the three rear screws using a suitable spanner .
25 W ater inlet There should be a COLD W A TER tap near the washing machine with a screwing on connection pipe of 3/4" for the water supply , a sink, a wash basin or a drainage system in the wall. Previously check if: - it is not a hot water tap.
26 The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is available from your local Service Force Centre. The joining piece must have an internal diameter of 18mm. If your drain hose looks like this (see below) you do not require the «U» piece.
27 If you require any further advice please contact your local water authority . Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING! This appliance must be earthed.
28 Environmental concerns Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers.
29 Guarantee conditions Standard guarantee conditions We, Electrolux, undertake that if within 12 months of the date of the purchase this Electrolux appliance or any part thereof is proved to be defec.
30 European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law .
31 www .electrolux.com 126.2936.42…ZWF10070-12070-14070.qxd 14/7/08 12:59 Página 31.
www .electrolux.com www .zanussi-electrolux.co.uk Subject to change without notice 126.2936.42 126.2936.42…ZWF10070-12070-14070.qxd 14/7/08 12:59 Página 32.
An important point after buying a device Zanussi ZWF 10070W1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZWF 10070W1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZWF 10070W1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZWF 10070W1 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZWF 10070W1 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZWF 10070W1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZWF 10070W1.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZWF 10070W1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZWF 10070W1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
