Instruction/ maintenance manual of the product ZU 9154 Zanussi
Go to page of 20
REFRIGERA T OR ZU 9154 2222682-31 INSTRUCTION BOOKLET.
Instructions for the User Important Safety Instructions 3 Description of the Appliance 4 Operation 4 Before use 4 Setting the temperature 4 Fresh food refrigeration 4 The door shelves 5 Normal Operati.
IMPORT ANT SAFETY INSTRUCTIONS 3 These warnings are provided in the interests of your safety . Ensure that you understand them all before installing or using this appliance. Y our safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Department.
DESCRIPTION OF THE APPLIANCE OPERA TION Before use Remove all securing tapes. W ash inside the appli- ance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or deter- gent as the smell may linger . Dry thoroughly .
5 D338 S.I.010 1 4 3 b 2 a Important During prologed periods of abnormally hot weather , if the thermostat is seto on too high a number , the cooling system may operate con- tinuously and the fridge coolilng plate may not defrost. T urning the knob to a lower number will cause the automatic defrosting to resume.
Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever .
1. Unscrew the light cover and then pull it outward by pressing as shown in the figure. Unscrew the bulb and replace it with a new 15 watt bulb (avail- able from your nearest Zanussi Service Force centre). 2. Replace the light cover by sliding it into its original position and replacing the screw .
8 If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
SER VICE AND SP ARE P ARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
10.
11.
Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of purchase this Zanussi appliance or any part there- of is proved to be defective by reason only of faulty wo.
TECHNICAL SPECIFICA TIONS Positioning For this appliance to work efficiently , it should be located away from heat sources, e.g. cookers, radia- tors, boilers, direct sunlight etc. Best performance is obtained with ambient temperature between +10°C and +32°C.
ELECTRICAL CONNECTION W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suit- able for your socket outlet, it must be cut off and the appropriate plug fitted.
BUILDING-IN INSTRUCTIONS 15 Before carrying out any work, remove the plug from the power socket. Door Reversal Left door opening: 1. Remove the grid from the appliance pulling it towards you with hands. 2. Remove the left side (A) of the grid cutting it from the rear (see figure).
T o reverse the opening direction of the door , proceed as shown in the figures: Attention After completion of the door reversing opera- tion, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet.
17 Building the appliance in under a worktop The dimensions of the recessed installation area must correspond with those indicated in the figure. Remove covering and adjusting strips.
18 T o mount the furniture door proceed as shown in the figures:.
Screw appliance into place. Refit the covering strip. Fitting the plinth Important For the efficient operation of the appliance, it is important that the original ventilation grid is used. ■ For an opening height dimension A=820 mm and a plinth height dimension a=100 mm, the plinth may be fitted without adjustments.
© Electrolux Household Appliances Limited 2000.
An important point after buying a device Zanussi ZU 9154 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZU 9154 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZU 9154 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZU 9154 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZU 9154 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZU 9154, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZU 9154.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZU 9154. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZU 9154 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
