Instruction/ maintenance manual of the product ZSF 2440 Zanussi
Go to page of 20
822 61 11-27 DISHW ASHER ZSF 2440.
- 2 - Contents For the user Safety Inf ormation 3 Description of the appliance 4-5 - Spray arm - Coarse strainer/microfilter - Fine filter - Detergent dispenser - Rinse aid dispenser - W ater soften.
Before installing and first using the dishwasher, read this instruction booklet carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the dishwasher are thoroughly familiar with its operation and safety features.
Description of the appliance - 4 - 4 5.
- 5 - Spra y arm (1) It is important to keep all the holes in the spray arm clear. A clogged hole can seriously affect washing efficiency. If the spray arm needs cleaning, unscrew the nut anti- clockwise, remove the washer and lift off the spray arm.
Combination buttons ”A”: In addition to selecting a programme, you can by pressing these two buttons adjust the setting of the water softener and cancel a programme in progress.
1. Press the On/Off button. 2. Press the combination buttons simultaneously and hold them pressed in. When the first three programme indicator lamps starts to flash, release the buttons. 3. Press the water softener button once. The lamp for the water softener starts to flash.
13 minutes - 8 - Pr ogramme c har t T ype of dishes Type of soil: • normally soiled • dried-on food remnants • heavily soiled • dried-on food remnants especially egg- white and starch • norm.
- 9 - Loading and unloading the dishwasher How to load the dishes The illustration shows the dishwasher loaded with six place settings. Your own dishes are not likely to be identical to this load, but if you follow the advice below we are sure you will be pleased with the results.
Star ting the pr ogramme 1. Scrape or rinse off solid food remnants. 2. Load the dishwasher. (See the basket and loading). 3. Put the correct amount of detergent into the detergent dispenser and close the lid. 4. Close the door. 5. Press in the On/Off button.
- 11 - General c leaning Inspect the filters and spray arm nozzle before re-loading the dishwasher and remove any food scraps. Wipe round the rubber gasket at the bottom of the door to remove grease which tends to collect there. Cleaning the filters There are two filters, a coarse one and a fine one which should be cleaned after every wash.
- 12 - Something Not W orking The programme will not start. The dishwasher is not filling with water . W ater not dischar ged at end of cycle. Dishes not washed satisfactorily . Visible lime deposits or white film on the dishes. The dishwasher is noisy .
- 13 - Service Service and Spare P ar ts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area.
- 14 - Guarantee Conditions Standar d guarantee conditions We, Zanussi Electrolux, undertake that if within 12 months from the date of the purchase this ZANUSSI ELECTROLUX appliance or any part thereo.
- 15 - Installation instructions Any electrical work required to install this appliance, should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance, should be carried out by a qualified plumber or competent person.
- 16 - Unpac king 1 Damages If the dishwasher has been damaged during transport, you should immediately notify the company responsible for delivering it. If you discover any damage, faults or that anything is missing, you should notify your retailer immediately.
- 17 - Installation W ater inlet The dishwasher is equipped with safety features which are to prevent the water from going back to the fresh water system. These features are ac- cording to current water technical safety regulations. The dishwasher should be permanently plumbed into a separate cold water supply.
P o wer supply The dishwasher is supplied with a lead and electrical plug for connection to a 230 V, 13 A earthed wall socket. Before any work is carried out on the dishwasher, it must be isolated from the electric mains supply, for example by removing the plug from the wall socket.
- 19 - The salt container and rinse aid dispenser shall be filled in accordance with this instruction manual. Before conducting the measurements the dishwasher shall be operated for one or two complete cycles using detergent and a clean load.
© Electrolux plc 2005 Technical changes possible.
An important point after buying a device Zanussi ZSF 2440 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZSF 2440 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZSF 2440 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZSF 2440 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZSF 2440 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZSF 2440, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZSF 2440.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZSF 2440. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZSF 2440 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
