Instruction/ maintenance manual of the product ZSF 2400 Zanussi
Go to page of 16
INSTRUCTION BOOKLET 822 61 11-28 DISHW ASHER ZSF 2400.
- 2 - For the user Impor tant safety inf ormation 3 Description of the appliance 4-5 - General cleaning - Rinse aid dispenser - Spray arm - Coarse filter - Fine filter - Detergent dispenser - W ater.
- 3 - 822 61 11-28 Before installing and fir st using the dishwasher , read the instruction booklet carefully , including its hints and warnings. Doing so will ensure that y our machine will perform pr operly and to best adv antage. Any one using the machine should be thoroughl y familiar with its instructions for use and safety features.
- 4 - Description of the appliance 1 2 3 4 5 6 Rinse aid dispenser (1) Use of rinse aid will result in faster drying of the load and gives the dishes a shiny finish. It may be necessary to adjust the quantity of rinse aid dispensed if you live in either a very hard water or a very soft water area.
- 5 - Detergent dispenser (5) Only use detergents specially designed for dishwashers. Pour the detergent into the compartment, for a normal load pour about 15g. Since not all detergents are the same, you should also consult the instructions on the packet.
The contr ol panel - 6 - 14 3 2 1 T emperature selector 55° - Button in 65° - Button out 2 Pr ogramme knob To start the machine: Turn the selector knob clockwise to the programme start. The On/Off switch is built into the programme timer. To isolate the dishwasher from the mains completely, unplug it from the wall socket.
- 7 - Ho w to load the dishwasher The illustration shows the machine loaded with five place settings. Your own dishes are not likely to be identical to this load, but if you follow the advice below we are sure you will be pleased with the results. • Always place glasses, cups and bowls upside down.
- 8 - Using y our appliance Pr oceed as follo ws: 1. Scrape off solid food remnants. 2. Load the dishwasher. (See “How to load the dishwasher”). Pour approx. 15 g detergent into the detergent dispenser. 3. Close the door. 4. Select the required temperature.
- 9 - Something Not W orking? The machine will not start. The machine is not filling with water . The machine will not drain. Dishes not washed satisfactorily . Visible lime deposits or white film on the dishes. The machine is noisy . The dishes are not quite dry .
- 10 - Service Service and Spare P ar ts In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning: 08705 929929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area.
- 11 - Guarantee Conditions Standar d guarantee conditions We, Zanussi Electrolux, undertake that if within 12 months of the date of the purchase this ZANUSSI ELECTROLUX appliance or any part thereof .
- 12 - Installation instructions Any electrical w ork required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing w ork required to install this appliance should be carried out by a qualified plumber or competent person.
- 13 - Unpac king the mac hine If the machine is dama g ed If the dishwasher has been damaged during transport, you should immediately notify the company responsible for delivering it. Check that the dishwasher is undamaged. If you discover any damage, faults or that anything is missing, you should notify the dealer immediately.
- 14 - Installation The dishwasher is intended for installation on a kitchen drainer or worktop. It is important to ensure the dishwasher is level to avoid any difficulty opening and closing the door. Its height can be adjusted with the adjustable feet (8 mm each) in each corner of the dishwasher.
- 15 - P o wer supply The dishwasher is supplied with a lead and electrical plug for connection to a 230 V, 13 A earthed wall socket. Before any work is carried out on the dishwasher, it must be isolated from the electric mains supply, for example by removing the plug from the wall socket.
© Electrolux plc 2005 Technical changes possible.
An important point after buying a device Zanussi ZSF 2400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZSF 2400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZSF 2400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZSF 2400 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZSF 2400 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZSF 2400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZSF 2400.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZSF 2400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZSF 2400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
