Instruction/ maintenance manual of the product ZRG16602WE Zanussi
Go to page of 16
EN ZRG16602WE User Manual Refrigerator.
Contents Safety information 2 Safety instructions 3 Operation 4 First use 5 Daily use 5 Hints and tips 6 Care and cleaning 6 Troubleshooting 7 Installation 9 Technical information 12 Subject to change without notice. Safety information Before the installation and use of the appliance, carefully read the supplied instructions.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. • Do not damage the refrigerant circuit. • Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
• Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug. Use WARNING! Risk of injury, burns, electrical shock or fire.
A medium setting is generally the most suitable. However, the exact setting should be chosen keeping in mind that the temperature inside the appliance depends on: • room temperature • how often the lid is opened • the quantity of food stored • the location of the appliance.
Hints and tips Normal operating sounds The following sounds are normal during operation: • A faint gurgling and bubbling sound from coils sound when refrigerant is pumped. • A whirring and pulsating sound from the compressor when refrigerant is pumped.
CAUTION! When moving the cabinet, lift it by the front edge to avoid scratching the floor. The equipment has to be cleaned regularly: 1. Clean the inside and accessories with lukewarm water and some neutral soap. 2. Regularly check the door seals and wipe clean to ensure they are clean and free from debris.
Problem Possible cause Solution The lamp is defective. Refer to "Replacing the lamp". The compressor operates contin- ually. Temperature is set incorrectly. Refer to "Operation" chapter. Many food products were put in at the same time.
Replacing the lamp Disconnect the plug from the mains socket. 1. Remove the screw from the lamp cover. 2. Remove the lamp cover (refer to the illustration). 3. Replace the used lamp with a new lamp of the same power and specifically designed for household appliances (the maximum power is shown on the lamp cover).
m i n . 1 0 0 m m 15 m m 1 5 m m Door reversibility WARNING! Before carrying out any operations, remove the plug from the power socket. CAUTION! To carry out the following operations, we suggest that this be made with another person that will keep a firm hold on the doors of the appliance during the operations.
Do a final check to make sure that: • All screws are tightened. • The magnetic seal adheres to the cabinet. • The door opens and closes correctly. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet.
Technical information Technical data Height mm 850 Width mm 595 Depth mm 635 Voltage Volts 230 - 240 Frequency Hz 50 The technical information are situated in the rating plate, on the external or internal side of the appliance and in the energy label.
www.zanussi.com 13.
14 www.zanussi.com.
www.zanussi.com 15.
www .zanussi.com/shop 212000768-A-222014.
An important point after buying a device Zanussi ZRG16602WE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZRG16602WE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZRG16602WE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZRG16602WE you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZRG16602WE will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZRG16602WE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZRG16602WE.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZRG16602WE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZRG16602WE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
