Instruction/ maintenance manual of the product ZOB 641 Zanussi
Go to page of 12
ELECTRIC OVENS ZOB 641 ZOB 652 INSTRUCTION BOOKLET.
2 This appliance complies with the following E.E.C. Directives: - 73/23 - 90/683 (Low Voltage Directive); - 89/336 (Electromagnetical Compatibility Directive); - 93/68 (General Directives) and subsequent modifications. These warnings are provided in the interest of safety .
3 Content s For the User For the Inst aller Description of the Oven 1. Control panel 2. Oven function control knob 3. End of cooking programmer 4. Oven thermostat control knob 5. Oven control light 6. Thermostat control light (°C) 7. Grill 8. Oven lamp 9.
4 Operation Oven function control knob The oven function control knob (Fig. 1) can have the following symbols and functions (depending on the models): 0 OFF position Oven light Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven.
5 Before cooking for the first time, carefully wash the oven accessories . Once the oven has been installed: a) set the thermostat knob to MAX (250); b) switch the oven function control knob to conventional cooking ( ) ; c) allow the oven to run empty for approximately 45 minutes; d) open a window for ventilation.
6 Using the oven Conventional cooking Turn the oven function control knob to the relevant symbol ( ) and set the thermostat knob on the required tempe- rature. If you need more heat from the bottom of the oven, adjust the shelf level as required, or (depending on models) turn the oven function control knob to (bottom heating element only).
7 Steaks 4 800 4 m a x 10 8 Chops 4 600 4 m a x 12 8 Sausages 8 5 00 4 m ax 1 0 6 Chicken (cut in pieces) 6 800 3 m a x 30 20 Kebabs 4 70 0 4 m a x 1 2 1 0 Chicken (breast) 4 40 0 4 m a x 13 1 0 Tomatoes 8 500 4 m a x 12 Fish (fillets) 4 4 00 4 m a x 8 6 Sandwiches 4 4 m a x 8 Toast 4 4 m a x 2~3 1 Upper side °C temp.
8 Replacing the Oven Light Ensure the electricity supply is switched off before carrying out this operation. The oven bulb has to comply to these features: a) resistant to temperatures of 300 °C; b ) electric rate: 230 V - 50 Hz; c) electric power rate: 25 W; d) connection type: E 14.
9 SOL UTION u Check that both a cooking function and a temperature have been selected or u Check the appliance is wired in properly, and the socket switch or the switch from the mains supply to the oven are ON. u Turn the thermostat knob on a temperature or u Turn the oven function control knob on a function.
10 Fig. 8 Fig. 9 Fig. 10 FO 0290 FO 0292 FO 0374 Recess dimensions Height 58,0 / 59,1 cm Width 56,0-57,0 cm Depth 55,0 cm Oven cavity dimensions Height 32,5 cm Width 44,0 cm Depth 39,0 cm Volum e 5 5 .
11 Fig. 12 Fig. 11 FO 2159 Securing the oven to the cabinet - Fit the appliance into the cabinet recess. - Open teh oven door and secure the oven to the kitchen cabinet with four wood screws, which fit the holes provided in the oven frame (Fig.
35677-8101 07/02 Grafiche MDM - Forlì From the Electrolux Group. The world s No.1 choice. The Electrolux Group is the worlds largest producer of powered appliances for kitchen, cleaning and outdoor use.
An important point after buying a device Zanussi ZOB 641 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZOB 641 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZOB 641 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZOB 641 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZOB 641 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZOB 641, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZOB 641.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZOB 641. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZOB 641 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
