Instruction/ maintenance manual of the product ZJ 1284 Zanussi
Go to page of 27
W ASHING MA CHINE ZJ 1284 ON-OFF QUICK WASH PROGRAMMES 650 rpm RINSE HOLD PLUS RINSE SENSOR INJECTION 1284 ZJ INS TRUCTION BOOKLE T 124973320.
2 Installation l This appliance is heavy. Care should be taken when moving it. l It is dangerous to alter the specifications or attempt to modify this product in any way. l All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to.
3 Contents For the User Important Safety Information 2 Y our New W ashing Machine 4 Description of the Appliance 5 l Door locked pilot light 5 l Detergent dispenser drawer 5 The Control Panel 6 Operating sequence 7-10 l Washing 4.
4 Y our New W ashing Machine l Automatic cooling of the wash water to 60°C before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing. l The special wool programme with its new delicate wash system treats your woollens with extreme care.
5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 “Mains-on” light 4 ON/OFF button 5 “Option” buttons 6 Programme selector dial 7 Door locked pilot light 8 Door opening handle 9 Filter 10 Adjustable feet Door locked pilot light The door stays locked throughout the wash cycle.
1 Detergent dispenser drawer 2 Mains-on light This light illuminates when the machine starts working and goes out when the ON/OFF button is released. 3 On/Of f button By depressing this button the machine starts operating. When depressed again, the machine stops.
7 Operating Sequence Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
8 6. Start the machine Before starting up the machine check that: l the appliance is plugged in l the water supply taps are turned on l the drain hose is correctly and securely positioned l the door and the detergent dispenser drawer are closed.
9 4. Select the requir ed option(s) Depress SPIN REDUCTION and/or QUICK WASH and/or RINSE HOLD PLUS button, if required. 5. Select the requir ed programme Turn the programme selector dial clockwise to the programme G or A if you wish to perform the prewash.
W ashing Hints Do NOT overload the machine. Weigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000 g = 1 kg Sheet 7.
11 And in which form? Not only are there different types of detergent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is to own personal choice. T raditional Powders Pour the powder directly into the dispenser drawer.
12 W ashing Pr ogrammes Degree of soil and type of laundry Description Wash programme Programme dial position Possible options Max. load NON- FAST COLOUREDS FAST COLOUREDS BOILWASH PREWASH For heavy soiled cotton items (whites and coloureds). Fast coloured cotton or linen fabrics, shirts, underwear, towels.
13 W ashing Pr ogrammes Degree of soil and type of laundry Description Wash programme Programme dial position MIXED FABRICS Possible options SHORT SPIN WOOL DELICATES Synthetic or mixed fabrics, underwear, coloured garments, non-shrink shirts, blouses.
14 W ash Car e Symbols Wash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine.
15 Cleaning the filter The water drain filter A clean filter is important for the correct functioning of the machine, and should therefore be cleaned after every washing programme.
16 The water inlet filters If your water is very hard or contains traces of lime deposit, the water inlet filters may become clogged. It is therefore a good idea to clean them from time to time. Turn off the water taps. Unscrew the water inlet hoses. Remove and clean the filters using a hard bristle brush.
17 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer.
18 Symptom The door will not open Possible causes l The programme is still running. l The door lock has not yet released (door pilot light on). l There is water in the tub Spinning starts late or the machine does not spin l The electronic unbalance detection device has cut in because the laundry is not evenly distributed in the drum.
19 Peace of Mind for T wenty-Four Months Standard guarantee conditions We, Zanussi Limited undertake that if, within 24 months of the date of the purchase, this Zanussi appliance or any part thereof i.
20 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way. Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
21 Unpacking All transit bolts and packing must be removed before using the appliance. You are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the rear right bolt. Lay the machine gently on its back, making sure that the hoses are not squashed.
22 If only a cold water supply is available, connect the two hoses to a cold water outlet by means of a «Y» connection piece. Installation should comply with local water authority and building regulations’ requirements.
23 Levelling Level the washing machine by raising or lowering the feet. The feet may be tight to adjust as they incorporate a self locking nut, but the machine MUST be level. Any necessary adjustment can be made with a spanner. Accurate levelling prevents vibration, noise and displacement of the machine during operation.
24 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed.
25 Building-in This appliance has been designed to be built into the kitchen furniture. The recess should have the dimensions shown in picture A. Preparation and assembly of the door The machine is originally pre-arranged for the assembly of a door opening from right to left.
26 Recommendations regar ding the construction and fitting of a base when the installation requir es an integrated appliance to be raised Where the appliance has been raised by mounting onto a wooden base provided by the installer.
Z.
An important point after buying a device Zanussi ZJ 1284 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZJ 1284 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZJ 1284 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZJ 1284 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZJ 1284 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZJ 1284, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZJ 1284.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZJ 1284. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZJ 1284 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
