Instruction/ maintenance manual of the product ZI 921/8 FF Zanussi
Go to page of 20
REFRIGERA TOR- FREEZER ZI 921/8 FF INSTRUCTION BOOKLET 2222 122-75.
2 IMPOR T ANT SAFETY INFORMA TION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another own.
3 CONTENTS Instructions f or the User Important Safety Information 2 Operation 4 Bef ore using 4 Control panel - Use of the freezer 4 Star t your appliance 4 T emperature control 4 Quick-freezing 5 F .
4 OPERA TION Bef ore using Remov e all securing tapes. W ash inside the appliance with luke warm water and bicarbonate of soda (5 ml to 0.5 litre of water).
5 F ast-freezing F or fast-freezing, push the f ast freeze s witch (D). The super control light (C) will then light up . The F ast-freezing function accelerates the freezing of fresh f ood and, at the same time, protects f oodstuffs already stored from undesirable w ar ming.
6 Normal Operating Sounds • Y ou ma y hear f aint gurgling or bubb ling sounds when the refrigerant is pumped through the coils or tubing at the rear , to the cooling plate/e vaporator or to the fix ed freezer shelv es.
7 Mo vable shelves The walls of the refrigerator ha ve runners so that the shelves can be positioned as desired . F or better use of space, the front half-shelves can lie ov er the rear ones. D338 P ositioning the door shelves T o permit storage of food pac kages of various sizes , the door shelves can be adjusted in height.
8 Food Storage • T o obtain the best results from your appliance , neither hot f oods nor liquids which may e vaporate , should be placed in the larder compar tment. • K eep the time between buying chilled f ood and placing it in your fridge as shor t as possible .
Defr osting Refrigerator The refrigerator automatically defrosts ev er y time the compressor stops. The water is discharged, via the pipe, into a tra y located at the bac k of the appliance abov e the compressor , where it ev aporates .
10 SOMETHING NO T W ORKING Symptom No power to the appliance The light does not come on The temperature in the fridge or freezer section is too high The freezer door will not open The compressor runs continously Excessive frost and ice has b uilt up Noise W ater under the salad bin Solution Check there is po wer at the sock et.
11 SER VICE AND SP ARE P AR TS CUST OMER CARE DEP AR TMENT In the e vent of y our appliance requir ing ser vice , or if you wish to purchase spare par ts, please contact y our local Zanussi Service Fo.
12 Standar d guarantee conditions W e, Zanussi, under take that if within 24 months of the date of the purchase this Zan ussi appliance or any par t thereof is prov ed to be defectiv e by reason only .
13 TECHNICAL SPECIFICA TIONS PO WER SUPPL Y V OL T A GE AND FREQUENCY 220-240 V / 50 Hz T O T AL POWER ABSORBED 160 W A VERAGE D AIL Y UNITS ELECTRICITY * 1.
14 INST ALLA TION P ositioning This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.
15 Electrical connections Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EARTHED . The manufacturer dec lines any liability should this safety measure not be observed.
16 Fur ther more , it is necessar y that the cabinet has a ventilation recess with the f ollowing dimensions: depth 50 mm width 540 mm Instructions f or totally b uilt-in appliances Door rever sal Recess dimensions Height (1) 1780 mm Depth (2) 550 mm Width (3) 560 mm T o ensure adequate v entilation, allow the clearances shown in figure .
17 Push appliance into housing until stop strip (A) touches the kitchen unit. F or a correct alignment make sure that the distance between the appliance and the cabinet is 44 mm. Open the door and push the appliance against the side of the kitchen unit opposite to that of appliance hinges.
18 Place guide (A) on the inside par t of the fur niture door , in the upper and low er position as shown in the figure and mark the position of external holes.
19 If the appliance is fix ed to the side of the kitchen unit, simply slack en the screws in fixing brac kets (E), mov e the brack ets as shown in the figure and re- tighten the screws . PR168 PR167/1 D B Should adjustment of the furniture door be necessar y , use the clearance of slots as required.
© Electrolux plc 2004.
An important point after buying a device Zanussi ZI 921/8 FF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZI 921/8 FF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZI 921/8 FF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZI 921/8 FF you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZI 921/8 FF will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZI 921/8 FF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZI 921/8 FF.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZI 921/8 FF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZI 921/8 FF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
