Instruction/ maintenance manual of the product ZI 7243 Zanussi
Go to page of 19
REFRIGER A T OR - FREEZER ZI 7243 INS TRUCTION BOOKLE T 2222 216-83.
2 IMPORT ANT SAFETY INFORMA TION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owne.
3 CONTENTS 2222 216-83 Instructions for the user Important Safety Information 2 Description of the appliance 4 Operation 5 Before using 5 Setting the temperature 5 The freezer compartment 5 Freezing f.
4 DESCRIPTION OF THE APPLIANCE A - Dairy compartment B - Shelves C - Bottle storage shelf D - Salad drawers E - Glass shelf F - Storage shelves G - Cool check temperature guide H - Thermostat I - Free.
5 OPERA TION Before using Remove all securing tapes. W ash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water).
6 Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired . For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves T o permit storage of food packages of various sizes, the door shelves can be adjusted in height.
7 Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever .
8 Cool Check Guide The guide consists of a temperature sensitive strip sealed in a shelf trim. When the fridge is operating at the safe temperature to store food the guide will appear black. If the temperature rises above this level the guide will show the words T OO W ARM.
9 Defrosting Refrigerator The refrigerator automatically defrosts every time the compressor stops. The water is discharged, via the pipe, into a tray located at the back of the appliance above the compressor , where it evaporates.
10 - Clean and dry thoroughly . - Replace the scraper in one of the drawers . - Reconnect the appliance to the mains or reset the thermostat to a functioning position. - After letting the appliance run for a least half an hour , replace the previously removed food into the compartment.
SOMETHING NOT WORKING Symptom No power to the appliance The light does not come on The temperature in the fridge or freezer section is too high The compressor runs continously Excessive frost and ice has built up Noise W ater under the salad bin Solution Check there is power at the socket.
12 SER VICE AND SP ARE P ARTS CUST OMER CARE DEP ARTMENT In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 0870 5 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
13 Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faul.
14 TECHNICAL SPECIFICA TIONS POWER SUPPL Y VOL T AGE AND FREQUENCY 220-240 V / 50 Hz T OT AL POWER ABSORBED 120 W A VERAGE DAIL Y UNITS ELECTRICITY * 0.88 kWh GROSS CAP ACITY Fridge 220 l Freezer 17 l NET CAP ACITY Fridge 195 l Freezer 17 l ST AR RA TING * This figure is based on standard test results in accordance with European Standard EN 153.
15 INST ALLA TION Positioning This appliance is designed to operate in ambient temperatures between 10¡C (50¡F) and 32¡C (90¡F). It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a cooker or other sources of direct heat, or in a very cold room e.
16 Electrical connections Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed.
17 Instructions for totally built-in appliances Recess dimensions Height 1225 mm Depth 550 mm Width 560 mm The applianceÕ s door has been locked in position for transport by means of pins on both sides. According to the door opening direction, remove relevant pins at the top and at the bottom.
18 Position the runners (A) at the top and bottom of the inside of the kitchen unit as shown in the diagram and mark the position of the external holes. After preparing the holes, screw the runners to the kitchen unit door using 3.5x16 mm screws. Open both the appliance door and that of the kitchen unit to approx.
Inner door reversal Using a screwdriver release bracket (1) by pressing on the internal spring and withdraw it from its seat together with the door; remove plug (2) and fit it in the hole left open on the opposite side; turn the door through 180¡, remove the bracket (1) and refit it on the opposite side.
An important point after buying a device Zanussi ZI 7243 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZI 7243 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZI 7243 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZI 7243 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZI 7243 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZI 7243, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZI 7243.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZI 7243. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZI 7243 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
