Instruction/ maintenance manual of the product ZFT 51/2 R Zanussi
Go to page of 16
REFRIGERA TOR ZFT 51/2 R 222261 1-83 INSTRUCTION BOOKLET.
2 Instructions for the user Important Safety Instructions 3 Description of the Appliance 4 Operation 5 Before use 5 Setting the temperature 5 The - star compartement 5 Frozen food storage 5 Thawing 6 .
Important Safety Instructions These warnings are provided in the interests of your safety . Ensure that you understand them all before installing or using this appliance. Y our safety is of paramount importance. If you are unsure about any of the meanings of these warnings contact the Customer Care Departement.
A - Dairy compartment B - Can storage shelf with egg tray C - Bottle storage shelf D - Salad drawer E - Glass shelf F - Cool check temperature guide G - Storage shelves H - Conveyor K - Storing frozen.
5 Operation Before use Remove all securing tapes. W ash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or deter- gent as the smell may linger .
Thawing Food can be thawed in a number of ways, depending on the type of food and the size of the packs. Meat, fish and fruit should be thawed in the refrigera- tion compartment and small pieces of meat can even be cooked while still frozen, but you must ensure that it is thoroughly cooked through.
Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever .
The guide consists of a temperature sensitive strip sealed in a shelf trim. When the fridge is operating at the safe temperature to store food the guide will appear black. If the tem- perature rises above this level the guide will show the words TOO W ARM.
While in operation the -star compartment becomes progressively covered with frost. This frost, which acts as an insulator and thus pre- vents the cold from reaching the food should be removed whenever the thickness of the frost exceeds 1/4". T o carry out complete defrosting proceed as follows: 1.
Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELEC- TRICITY supply . Internal cleaning Clean the inside and accessories with warm water and bicarbonate of soda (5ml to 0.5 litre of water). Rinse and dry thoroughly .
11 If after the above checks, there is still a fault, call your local Service Force Centre. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
Service and Spare Parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Force Centre by telephoning: 0870 5 929929 Y our call will be routed to the Service Force Centre covering your post code area.
Standard guarantee conditions We, Zanussi Limited, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of fau.
DIMENSIONS Height 85 cm Width 49,5 cm Depth 60 cm POWER SUPPL Y VOL T AGE AND FREQUENCY 220-240 V / 50 Hz TOT AL POWER ABSORBED 90 W A VERAGE DAIL Y UNITS ELECTRICITY 0,74 kWh GROSS CAP ACITY 140 l Fr.
Electrical Connection W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any ilability should this safety measure not be observed. If the plug that is fitted to your appliance is not suit- able for your socket outlet, it must be cut off and the appropriate plug fitted.
Door Reversal Before carrying out the operations described below , pull out the mains plug from the wall socket. T o carry out this reversal go through the following steps: 1. Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing.
An important point after buying a device Zanussi ZFT 51/2 R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZFT 51/2 R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZFT 51/2 R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZFT 51/2 R you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZFT 51/2 R will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZFT 51/2 R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZFT 51/2 R.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZFT 51/2 R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZFT 51/2 R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
