Instruction/ maintenance manual of the product ZDF 2010 Zanussi
Go to page of 16
EN User manual Dishwasher ZDF 2010.
Contents Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Product des cription _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _.
– Farm houses – By clients in hotels, motels and other resi- dential type environments – Bed and breakfast type environments. Warning! Risk of injury. • Do not change the specification of this appli- ance. • Put knives and cutlery with sharp points in the cutlery basket w ith the points down or in a horizontal position.
Control panel 1 65 4 23 1 On/off indicator 2 Programme marker 3 Indicators 4 Half load button 5 Start button 6 Programme knob Indicators Descripti on End indicator. Salt indicato r. This indicator is o ff while the programme operates. Rinse aid indicator.
Programme Degree of soil Type of load Programme phases Options 3) All Prewas h 1) With this prog ramme you can wash a load with fresh so il. It gives good washing results in a short time.
Adjusting the water softener Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results. The water softener neu- tralises these minerals. The dishwasher salt keeps the water softener clean and in good conditions.
5. To confirm the setting, turn the programme knob until the p rogramme marker is aligned with the on/off indicator. Filling the salt container Caution! Only use dishwasher salt. Other products can cause damage to the appliance. Water and salt can come out from the salt container when you fill it.
2. Press the on/off button to activate the appli- ance. Make sure that the appliance is in set- ting mode. Refer to ’SETTING AND STARTING A PROGRAMME’. • If the salt indicator is on, fill the salt con- tainer. • If the rinse aid indicator is on, fill the rinse aid dispenser.
When you use tablets, that contain salt and rinse aid, do not fill the salt container and the rinse aid dispen ser. The rinse aid indicator al- ways comes on if the rinse aid dispenser is empty. 1. Adjust the water softener to the lowest lev- el. 2. Set the rinse aid dis penser to the lowest posit ion.
Care and cleaning Warning! Before maintenance, deac tivate the appliance and disconnect the mains plug from the mains socket. Dirty filters and c logged spray arms de- crease the washing results.
Alarm code Problem • The start i ndicator fl ashes co ntinuousl y. • The end indic ator flashes 1 t ime intermittent ly. The appliance do es not fill with water. • The start i ndicator fl ashes co ntinuousl y. • The end indic ator flashes 2 t imes intermitt ently.
Problem Possible cause Possible solution The filters are n ot correctly assem- bled and installed. Make sure that the f ilters are correct ly assembled and installed. The spray arms are clogged. Remove remaining soil wit h a thin pointed object. The programme was n ot applicable for the type of lo ad and soil.
Problem Possible cause Possible solution The quality of th e combi detergent tablets can be the cause. • Try a different brand of combi deter- gent tablets. • Activate the rin se aid dispenser and use the rinse aid toge ther with the combi detergent tablets .
14 www.zanussi.com.
15 www.zanussi.com.
www.zanussi.com/shop 156959661-A-222012.
An important point after buying a device Zanussi ZDF 2010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZDF 2010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZDF 2010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZDF 2010 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZDF 2010 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZDF 2010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZDF 2010.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZDF 2010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZDF 2010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
