Instruction/ maintenance manual of the product ZD 19/4 Zanussi
Go to page of 11
REFRIGER A TEUR CONGELA TEUR FRIDGE-FREEZER ZD 19/4 NO TICE D’UTILIS A TION INS TRUCTION BOOKLE T 2222 049-53.
26 W ARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner , or should you mo.
27 ¥ Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Important: if the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. ¥ There are working parts in this product which heat up.
28 Storage of frozen food When first starting-up or after a period out of use, before putting the products in the compartment let the appliance run for at least two hours on the coldest setting, then turn the thermostat knob to the normal operating position.
29 Door shelves T o permit storage of food packages of various sizes, the door shelves can be adjusted in height. T o make these adjustments proceed as follows: Gradually pull the shelf in the direction of the arrows until it comes off, then reposition as required.
¥ on the inner door or special card (if supplied) you will find sketches of various animals and food types together with the recommended storage time (in months) from the time of freezing; ¥ do not put carbonated liquids (fizzy drinks, etc.) in the freezer compartment as they may burst.
31 Defrosting Frost is automatically eliminated from the evaporator of the refrigerator compartment every time the motor compressor stops, during normal use. The defrost water drains out through a trough into a special container at the back of the appliance, over the motor compressor , where it evaporates.
32 CUST OMER SER VICE AND SP ARE P ARTS If the appliance is not functioning properly , check that: ¥ the plug is firmly in the wall socket and the mains power switch is on; ¥ there is an electricity supply (find out by plugging in another appliance); ¥ the thermostat knob is in the correct position.
33 INST ALLA TION Electrical connection Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply . V oltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used.
34 Rear spacers In the plastic envelope containing the Operating Instructions are also included two wall spacers to be fitted into the special openings provided on the back of the appliance. Push-fit the spacers into the openings, making sure that arrow (A) is positioned as per Fig.
En cas de dysfonctionnement, le vendeur de votre appareil est le premier habilitŽ ˆ intervenir . A dŽfaut (dŽmŽnagement de votre part, fermeture du magasin o• vous avez effectuŽ l'achatÉ), veuillez consulter : - L'Assistance T echnique Consommateurs pour toutes questions techniques.
An important point after buying a device Zanussi ZD 19/4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZD 19/4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZD 19/4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZD 19/4 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZD 19/4 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZD 19/4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZD 19/4.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZD 19/4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZD 19/4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
