Instruction/ maintenance manual of the product ZCM 650 Zanussi
Go to page of 36
MIXED FUEL COOKERS ZCM 650 ZCM 651 INSTRUCTION BOOKLET Please read this instruction booklet before using the appliance GB.
2.
3 Import ant Safety Information Y ou MUST read these warnings carefully before installing or using the hob. If you need assistance, contact our Customer Care Department on 08705 727727 Inst allation .
4 Content s Guide to Use the Instructions The following symbols will be found in the text to guide you throughout the Instructions: Safety Instructions Ste p b y s t e p i ns t r u c t io n s f o r a .
5 The Oven Cavity Grill element Oven Light Accessories Oven fan Grill trivet Grill/roasting pan Removable handles 2 anti-tip shelves Control Panel 1. Back left burner control knob (semi-rapid) 2. Front left burner control knob (ultra-rapid triple crown) 3.
6 T o light a burner: z turn the relevant control knob anticlockwise to the maximum position, then push it down to ignite the burner; z upon ignition, keep the knob pushed down about 5 seconds.
7 Oven Function Control Knob Oven Light - The oven light will be on without any cooking function. Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven.
8 Electronic programmer 1. “Cook time” indicator 2. "T emperature" button for displaying the temperature inside the oven 3. “End Time” indicator 4. “Pyrolytic” button for activating the pyrolytic cleaning cycle 5. “Minute minder” indicator 6.
9 How to select a cooking function and set the temperature The oven has seven different cooking functions. 1. Turn the oven control knob and select the required cooking function. Each time a cooking function is selected, a pre-set temperature will appear in the display .
10 Before the First Use of the Cooker Remove all packaging, both inside and outside the oven, before using the oven. Before cooking for the first time, carefully wash the oven accessories. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted.
11 “Minute minder” function The minute minder function can also be used when the oven is off. The minute minder alarm will sound at the end of a timed period, but THE OVEN WILL REMAIN ON, if it is in use. T o set the minute minder: 1. Press button “Time” to select the “Minute Minder” function.
12 How to make the oven switch off automatically This function allows the oven to automatically switch off at the end of a programmed cooking duration time. Place food in the oven, select a cooking function and adjust the cooking temperature (see paragraph “How to select a cooking function and set the temperature”).
13 How to make the oven switch on and off automatically The functions “Cook Time” and “End time” can be used simultaneously to set the oven to switch on and off automatically at a later time. 1. Set the duration time with the “Cook Time” function (carry out the cooking duration setting as described in the previous chapter).
14 Safety and Energy saving functions Safety Cut-Off Function The oven will switch off automatically if any change of setting is made, according to the table bel ow (Fig.
15 Condensation and Steam When food is heated it produces steam in the same way as a boiling kettle. The oven vents allow some of this steam to escape. However , always st and back from the oven when opening the oven door to allow any build up of steam or heat to release.
16 Using the Conventional Oven When using this setting, heat comes from both the top and bottom elements. This allows you to cook on a single level and is particularly suitable for dishes which require extra base browning such as pizzas, quiches and flans.
17 These charts are intended as a guide only . It may be necessary to increase or decrease the temperature to suit your individual requirements. Only experience will enable you to determine the correct setting for your personal requirements.
18 The bottom element provides direct heat to the base of pizzas, quiches or pies, while the fan ensures air is circulated to cook the pizza toppings or pie fillings. To obtain the best results use the lower shelf levels. 1. Turn the oven function control knob to the required cooking function ( ).
19 Grilling Grilling must be carried out with the oven door closed. The grill pan handles must be removed from the pan. The grill cavity becomes very hot during use. Caution must be used when removing and replacing the grill pan handles. If necessary oven gloves should be used to protect the hands.
20 Defrosting Chart The times quoted in the chart should be used as a guide only , as the speed of defrosting will depend on the kitchen temperature. For example, the colder the ambient temperature, the longer the defrosting time. Chicken 1000 g. 100-140 20-30 Place the chicken on an inverted saucer on a large plate.
21 Before any maintenance or cleaning can be carried out, you must DISCONNECT the cooker from the electricity supply . This appliance cannot be cleaned with steam or with a steam cleaning machine. The Hob T op The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool.
22 Cleaning the Oven The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan. Cleaning materials Before using any cleaning materials on your oven, check that they are suitable and that their use is recommended by the manufacturer .
23 Choose this function to clean the oven by pyrolysis. The following pyro levels are available: Pyrolytic 1 (PYr I) time : 2 h = 30 min heat-up +1 h at 480°C + 30 min cooling down. Pyrolytic 2 (PYr 2) time : 2 h 30 min. = 30 min heat-up +1 h 30 min at 480°C + 30 min cooling down.
24 If you turn the oven knob to a cooking function while the pyrolytic function is active, the cleaning cy- cle will be interrupted. If the oven door lock is activated, it is impossible to select any cooking until the door lock is off.
25 Cleaning The Oven Door The oven door is made up of four glasses. It is possible to remove them for easier cleaning. Warning - The oven door may bang shut if you try to extract the inner glasses when the oven door is still fitted to the oven. Before cleaning the oven door, we recommend you to remove it from the oven.
26 DO NOT clean the oven door while the glass panels are warm. If this precaution is not observed the glass panels may shatter. If the door glass panels become chipped or have deep scratches, the glasses will be weakened and must be replaced to prevent the possibility of the panel shattering.
27 If the appliance is not working correctly , please carry out the following checks, before contacting your local Service Centre. IMPORT ANT : If you call out an engineer to a fault listed below , or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee.
28 For general enquiries concerning your Zanussi-Electrolux appliance or for further information on Zanussi-Electrolux products, please contact our Customer Care Department by letter or telephone at the address below or visit our website at www .zanussi.
29 Guarantee Conditions Zanussi-Electrolux Guarantee conditions We, Zanussi-Electrolux, undertake that if, within 24 months of the date of the purchase, this Zanussi- Electrolux appliance or any part .
30 Import ant Safety Requirement s This appliance must be installed in accordance with the Gas Safety (Installation and Use) Regulations (current addition) and the I.E.E. Wiring Regulations. Detailed recommendations are contained in the following British S tandard Codes of Practice - B.
31 Inst allation Positioning the Appliance (Fig. 1) This appliance cannot be positioned on a base. The appliance cannot be installed beside or between furniture units whose height exceeds the cooker worktop. Note A: The appliance is designed to be flush fitted with 2mm clearance at each side to allow for it to be pulled forward for cleaning etc.
32 LEVELLING FEET PENCIL LINE ON THE FLOOR PLAN VIEW OF THE COOKER 580 mm. 100 mm. 300 mm. 295 mm. WALL F ACE A BACK OF COOKER SIDE VIEW OF THE COOKER BASE OF COOKER ENGAGEMENT EDGE FOR ST ABILITY BRACKET Fig.
33 Electrical connections Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations. THIS COOKER MUST BE EARTHED. The manufacturer declines any liability should these safety measures not be observed.
34 Commissioning When the hob has been fully installed it will be necessary to check the minimum flame setting. T o do this, follow the procedure below . - Turn the gas tap to the MAX position and ignite. - Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times.
35 ZCM 650/651 0,78 kWh 41 min. 56 1 130 cm ² 0,79 kWh 43 min..
Grafiche MDM - Forlì 35687-5421 07/04 CUSTOMER CARE Zanussi-Electrolux Cornwall House 55-77 High S treet Slough Berkshire SL1 1DZ 08705 727727 (*) © Electrolux plc 2004 From the Electrolux Group. The world’s No.1 choice. The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use.
An important point after buying a device Zanussi ZCM 650 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZCM 650 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZCM 650 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZCM 650 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZCM 650 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZCM 650, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZCM 650.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZCM 650. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZCM 650 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
