Instruction/ maintenance manual of the product ZBF 610 Zanussi
Go to page of 11
BUIL T -IN OVEN ZBF 610 INSTRUCTION BOOKLET IL.
2 English These warnings are provided in the interest of safety . Y ou MUST read them carefully before installing or using the appliance. Import ant Safety Information Inst allation It is mandator.
3 Content s For the User For the Inst aller Description of the Oven Oven function control knob (Fig. 1) The oven function control knob can have the following symbols and functions: Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven.
The Safety Thermost at This oven is provided with a safety thermostat. In case of malfunctioning of the main thermostat, and consequent over-heating, the safety device will stop the power supply to the appliance. If this happens, call your local Zanussi Service Centre.
Before cooking for the first time, carefully wash the oven accessories . Once the oven has been installed: a) set the thermostat knob to MAX (250); b) switch the oven function control knob to conventional cooking ( ); c) allow the oven to run empty for approximately 45 minutes; d) open a window for ventilation.
6 Using the oven Conventional cooking Turn the oven function control knob to the relevant symbol ( ) and set the thermostat knob on the required tempe- rature. If you need more heat from the bottom of the oven, turn the oven function control knob to (bottom heating element only).
7 temp. Cakes Whipped up kneading 2 1 8 0 2 (1 and 3)* 1 6 0 45 ~ 60 Leavened kneading 2 18 0 2 ( 1 and 3)* 16 0 20 ~ 35 Shortbread dough 2 18 0 2 (1 and 3)* 1 6 0 20 ~ 30 Butter-milk cheese cake 1 1 .
8 Replacing the Oven Light Ensure the electricity supply is switched off before carrying out this operation. The oven bulb has to comply to these features: a) resistant to temperatures of 300 °C; b) electric rate: 230 V - 50 Hz; c) electric power rate: 25 W; d) connection type: E 14.
9 SOL UTION u Check that both a cooking function and a temperature have been selected or u Check the appliance is wired in properly, and the socket switch or the switch from the mains supply to the oven are ON. u Turn the thermostat knob on a temperature or u Turn the oven function control knob on a function.
10 Recess dimensions Height in-column 58,0 cm undertop 59,1 cm Width 56,0 cm Depth 55,0 cm Oven cavity dimensions Height 32,5 cm Width 42,0 cm Depth 39,0 cm V ol um e 53, 5 l T echnical Dat a Heating .
11 Fig. 14 FO 0039 Securing the oven to the cabinet - Fit the appliance into the cabinet recess. - Open the oven door and secure the oven to the kitchen cabinet with four wood screws, which fit the holes provided in the oven frame (Fig.
An important point after buying a device Zanussi ZBF 610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZBF 610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZBF 610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZBF 610 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZBF 610 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZBF 610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZBF 610.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZBF 610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZBF 610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
