Instruction/ maintenance manual of the product ZBB6286 Zanussi
Go to page of 20
REFRIGERA TOR- FREEZER ZBB 6286 INSTRUCTION BOOKLET 2223 460-12.
2 It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transf erred to another owner , or should you mo ve house .
3 CONTENTS Instructions f or the User Important Safety Information 2 Operation 4 Before using 4 Control panel - Use of the freezer 4 Star t y our appliance 4 T emperature control 4 Quick-freezing 5 F .
4 OPERA TION Before using Remov e all secur ing tapes . Wash inside the appliance with luke war m w ater and bicarbonate of soda (5 ml to 0.5 litre of water).
5 Fast-freezing For f ast-freezing, push the fast freeze s witch (D). The super control light (C) will then light up. The F ast-freezing function accelerates the freezing of fresh food and, at the same time , protects foodstuffs already stored from undesir able warming.
6 Normal Operating Sounds • Y ou ma y hear faint gurgling or bubb ling sounds when the refrigerant is pumped through the coils or tubing at the rear , to the cooling plate/ev aporator or to the fixed freezer shelv es.
7 Mov able shelves The walls of the refrigerator hav e r unners so that the shelves can be positioned as desired . For better use of space , the front half-shelves can lie ov er the rear ones. D338 P ositioning the door shelves T o permit storage of food packages of v arious sizes, the door shelves can be adjusted in height.
8 Food Storage • T o obtain the best results from your appliance, neither hot foods nor liquids which ma y ev aporate, should be placed in the larder compar tment. • K eep the time between buying chilled food and placing it in your fridge as shor t as possible.
Defrosting Refrigerator The refrigerator automatically defrosts ev er y time the compressor stops. The water is discharged, via the pipe, into a tra y located at the back of the appliance abov e the compressor, where it e vaporates.
10 SOMETHING NO T WORKING Symptom No power to the appliance The light does not come on The temperature in the fridge or freezer section is too high The freezer door will not open The compressor runs continously Excessive frost and ice has b uilt up Noise W ater under the salad bin Solution Check there is pow er at the socket.
11 SER VICE AND SP ARE P AR TS CUST OMER CARE DEP ARTMENT In the ev ent of your appliance requiring ser vice, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 0870 5 929929 Y our telephone call will be automatically routed to the Service Force Centre cov ering your post code area.
12 Standard guarantee conditions We , Zanussi, under take that if within 12 months of the date of the purchase this Zanussi appliance or any part thereof is prov ed to be defective b y reason only of .
13 TECHNICAL SPECIFICA TIONS PO WER SUPPL Y VOL T AGE AND FREQUENCY 230-240 V / 50 Hz T O T AL POWER ABSORBED 160 W A VERAGE D AIL Y UNITS ELECTRICITY * 0.
14 INST ALLA TION P ositioning This appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located at the left on the inside of the appliance.
15 Electrical connections Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EARTHED . The manufacturer declines an y liability should this safety measure not be observed.
16 Fur thermore, it is necessar y that the cabinet has a ventilation recess with the f ollowing dimensions: depth 50 mm width 540 mm Instructions for totall y built-in appliances Door rever sal Recess dimensions Height (1) 1780 mm Depth (2) 550 mm Width (3) 560 mm T o ensure adequate ventilation, allo w the clearances shown in figure.
17 D724 Apply the sealing strip pushing it between the refrigerator and the adjacent cabinet. F asten the appliance with 4 screws provided in the kit included with the appliance. (I = shor t) (P = long) Make sure that a distance of 44 mm is maintained in the lower part between the kitchen furniture and the border of the appliance.
18 Place guide (Ha) on the inside par t of the furniture door , up and down as shown in the figure and mark the position of external holes. After having drilled holes, fix the guide with the screws supplied.
19 If the appliance is fixed to the side of the kitchen unit, simply slack en the screws in fixing brackets (E), mov e the brackets as shown in the figure and re- tighten the screws. After completion of the door rev ersing operation, check that the door gask et adheres to the cabinet.
© Electrolux plc 2007.
An important point after buying a device Zanussi ZBB6286 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi ZBB6286 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi ZBB6286 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi ZBB6286 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi ZBB6286 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi ZBB6286, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi ZBB6286.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi ZBB6286. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi ZBB6286 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
