Instruction/ maintenance manual of the product WJS 1197 W Zanussi
Go to page of 31
W ASHER -DR YER WJS 1197 W INS TRUCTION BOOKLE T 124976381.
2 Installation n This appliance is heavy . Care should be taken when moving it. n It is dangerous to alter the specifications or attempt to modify this product in any way . n All packing and transit bolts must be remov ed before use. Serious damage can occur to the product and to property if this is not adhered to.
3 Contents F or the User Important Safety Information 2 Y our New W asher-Dryer 4 Description of the Appliance 5 Door locked pilot light 5 Detergent dispenser drawer 5 The Control Panel 6 Operating sequence 7-14 W ashing 4.
4 Y our New W asher -Dryer i Y our new washer-dryer , fitted with the Zanussi “JET SYSTEM”, meets all moder n requir ements for effective treatment of laundry with low water , energy and detergent consumption.
5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 Drying indicator light 4 Drying time selector dial 5 “Option” buttons 6 “ON/OFF” button 7 “Mains-on” light 8.
6 The Contr ol Panel 5 Rinse Hold Plus button Press this button to make the machine stop with water in the drum after the cotton, synthetic or delicate wash cycles.
7 Operating Sequence Before the first w ash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remov e any manufacturing residue from the drum and tub . Pour 1/2 a measure of detergent into the dispenser drawer and start the machine.
8 4. Select the r equired option(s) Depress SPIN REDUCTION, QUICK W ASH and/or RINSE HOLD PLUS button, if necessary . 5. Select the r equir ed pr ogr amme T urn the programme selector dial clockwise to the programme A or B.
9 P0004 P0226 W ASHING 2 KG OF MIXED F ABRICS A T 50°C Suppose you hav e 2 kg of mixed f abrics to wash. They are rather delicate fabrics and should not be washed at a high temperature. 1. Load the laundr y Open the door by pulling the catch outward.
10 J P0527S P0471S ON/OFF 5. Select the r equir ed pr ogr amme T urn the programme selector dial clockwise to the programme J . 6. Star t the machine Before starting up the machine check that: n the a.
11 DR YING 2.25 KG OF CO TTON Y ou ha ve for e xample just machine-washed and spun at 1050 rpm 4.5 kg (10 lb) of laundry . They are cotton fabrics of medium weight which you want to iron as soon as they are dry . Switch off the machine. Then remov e the laundry from the appliance and divide the items to obtain two loads of approx.
12 5. At the end of the pr ogr amme The machine stops automatically and the drying light goes out. The door is controlled by a safety device which releases 2 minutes after the end of the programme. The door can be opened after the door locked light has gone out.
13 A UTODR YING 1 KG OF MIXED F ABRICS Y ou intend to wash and dry automatically 1 kg (2.2 lb) of mixed fabrics which do not need ironing. Proceed as follows: 1. Load the laundr y Open the door by pulling the catch outward. Load the items one at a time and close the door .
14 6. Star t the machine Depress the ON/OFF button: the mains-on light and door locked light come on and the machine starts operating. 7. At the end of the pr ogr amme The machine stops automatically and the drying light goes out. The door is controlled by a safety device which releases 2 minutes after the end of the programme.
15 W ashing and Drying Hints i Do NO T ov erload the machine. W eigh the laundry the first fe w times you use the appliance. The av erage weights of the most common items are listed below as a guide: .
16 And in which f orm? Not only are there different types of deter gent, but the y are also av ailable in dif ferent forms. Whether you chose a powder or liquid in traditional or compact form is to own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser dra wer .
17 W ashing and Drying Pr ogrammes Degree of soil and type of laundry Description W ash programme Programme dial position Possible options Max. load NON- F AST COLOUREDS F AST COLOUREDS WHITES EXTRA PREW ASH For hea vy soiled cotton items (whites and coloureds).
18 W ashing and Drying Pr ogrammes DR YING: (at half heat) Programme F abric type Max. load Degree of dryness Drying time (green sector) L Synthetics, mixed fabrics spun at 900 rpm 1.5 kg 1 kg Store dry Iron dry 70-80 mins 50-60 mins 50-60 mins 40-50 mins 1.
19 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the cor rect programme on your washing machine.
20 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine.
21 Cleaning the filter The water drain filter A clean filter is important for the correct functioning of the machine, and should therefore be cleaned after ev ery washing programme. Open the filter door and place a container underneath to catch any spillage.
22 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Zanussi Service Force Centre, please carry out the checks listed below .
23 Symptom The door will not open n The programme is still running (the door locked light is on). n The door lock has not yet released. n There is water in tub . The machine makes an unusual noise n The machine is fitted with a type of motor which makes an unusual noise compared with other traditional motors.
24 Peace of Mind for Twelve Months Standar d guarantee conditions W e, Zanussi Limited under take that if, within 12 months of the date of the purchase, this Zanussi appliance or any part thereof is p.
25 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
26 P0233 2 1 P0255 P0234 P0020 P0256 Unpacking All transit bolts and packing must be removed before using the appliance. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remo ve the rear right bolt.
27 W ater inlet The inlets on the back of the appliance are colour coded, blue for cold and red for hot. Before connecting the hoses be sure to fit the mesh filters «A» supplied as per diagram. If only a cold water supply is av ailable, connect the two hoses to a cold water outlet by means of a «Y» connection piece.
28 The drain hose may be extended to a maximum of 4 metres. An additional drain hose and joining piece is av ailable from your local Service F orce Centre. The joining piece must have an internal diameter of 18mm. If you intend the drain hose to empty into a sink, make sure that the sink is empty and the plug hole is not blocked.
29 In the inter est of the en vir onment W ashing machines and dishwashers should be connected to the FOUL drainage system, the water will then be taken to a sew age works for treatment before being discharged safely into a ri v er .
30 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED . The manufacturer declines any liability should this safety measure not be observed.
Z.
An important point after buying a device Zanussi WJS 1197 W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi WJS 1197 W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi WJS 1197 W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi WJS 1197 W you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi WJS 1197 W will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi WJS 1197 W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi WJS 1197 W.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi WJS 1197 W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi WJS 1197 W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
