Instruction/ maintenance manual of the product T 733 V Zanussi
Go to page of 21
ZANUSSI ZANUSSI INSTRUCTIONS MANUAL W ASHING MACHINE T 833 V T 733 V 146 3866 00.
22 CONTENTS Guide to use the instruction The following symbols will be found in the text to guid you throughout the instructions : Safety instructions Hints and tips Environmental information For the .
23 You must read the whole of this instruction book before using the appliance. Follow the advice carefully. Keep the book for future reference. If you sell or give away the appliance, make sure that the book is passed to the new owner. The following warnings are provided in the interest of overall safety.
24 Saf eties Lid : your washing machine is equipped with a safety avoiding the switching of the appliance when the flapdoors of the drum are opened ; the closure of the lid is so impossible. An electromechanic safety prohibits the opening of the lid when the washing machine works and 2 minutes after the end of the programme.
25 DESCRIPTION OF THE APPLIANCE Detergent dispenser Symbols Washing powder for programmes with pre-wash. Washing powder or liquid detergent for the main wash. Bleach compartment. Liquid additives (fabric softener and conditioner...). 5 Softener overflow.
26 USE OF Y OUR APPLIANCE The contr ol panel 1 . ON/OFF pushb utton " " Press the on/off pushbutton, the programme starts : the control lamp illuminates. 2. Contr ol lamp The control lamp illuminates when the appliance is working (on/off pushbutton " " pressed).
27 OPERA TING INSTRUCTIONS 1. Place the laundry in the drum Lift the lid. Open the drum by pressing the release button A . The two flapdoors will open automatically. Shake the laundry out loosely and place into the drum. Close the drum and shut the lid.
28 6. Select the temperature Choose the temperature which corresponds to the chosen programme, with the help of the indica- tions or the programme table, according to the fibers and the fastness of the colours.
29 PR OGRAMMES CHAR T Programmes f or cotton/linen Maximum load : 5,0 kg (cotton) s e m m a r g o r P f o n o i t p i r c s e D e m m a r g o r p e h t .
30 Pr ogrammes for synthetics/delicates/w ool Maxim um loads : 2,5 kg (synthetics), 1 kg (w ool). ( * ) The data is given purely as an indication: the consumption values may vary in relation to the quantity and type of laundry, the temperature of the water supply and the ambient temperature.
31 HINTS AND TIPS W ashing hints You are advised not to leave your laundry too long, especially when damp. Damp laundry produces moult and unpleasant smells. Moult stains cannot be removed. Sor t y our laundr y . Study carefully the chart in this booklet explaining the symbols used on clothes labels (see page 14).
32 To remove paint stains, for example, use a volatile substance such as turpentine: in this case, you should wait for it to dry completely before washing. The manufacturer of your washing machine is not responsible for any damage deriving from the use of volatile, inflammable or toxic substances.
33 W asch code symbols These symbols appear on fabric label, in order to help you to choose the best way to treat your laundry. Max. wash Temperature 95 ° C STRONG WASH BLEACHING DELICATE WASH Temper.
34 Bodyw ork The outside or the machine can be cleaned with warm water and a neutral non-abrasive household detergent. Wipe with clean water and dry after cleaning.
35 The wash results are not as usual. The wash results are not as usual. The wash results are not as usual. The wash results are not as usual. The wash results are not as usual. The washing cycle is very much too long. The washing cycle is very much too long.
36 The machine vibrates or is too noisy. The machine empties as it fills. There is water on the floor. Softener detergent flows out the overflow orifice.
37 If you are not ab le to identify or to solve the problem, consult our service depar tment. Bef ore calling, note the brand, model and date of purchase of your machine : the ser vice depar tment will require this inf or mation.
38 FOR THE INST ALLER T echnical inf ormation Dimensions height with panel 895 mm height without panel 850 mm width 397 mm depth 600 mm Power supply voltage / frequency 230 V / 50 Hz Total power absor.
39 Installation The floor must be clean and dry, free from floor polish and other greasy substances, so that the machine does not slide about. Do not use any grease as lubrification. Installation on deep pile carpets and floor coverings with foam backings is not recommended, as the stability of the machine is no longer guaran- teed.
40 W ater connection Connect the water inlet hose to a cold water tap with a 3/4" gas threaded orifice, after having inserted the rugger sealing washer into the hose collar (fig.
05/02.
An important point after buying a device Zanussi T 733 V (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi T 733 V yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi T 733 V - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi T 733 V you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi T 733 V will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi T 733 V, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi T 733 V.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi T 733 V. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi T 733 V along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
