Instruction/ maintenance manual of the product DA 4131 Zanussi
Go to page of 16
DISHW ASHER DA 4131 Instruction Book 152968 33/1 UK.
2 The control panel Description of the appliance 1. W ater hardness adjustment 2. Upper basket stop 3. Salt container 4. Detergent dispenser 5. Rinse aid dispenser 6. Control panel 7. Filters 8. Lower spray arm 9. Upper spray arm 10. Upper basket 11 .
3 Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.
4 W ashing programmes Programme Degree of soil and type of load Starting position of the programme selector dial Heavy soil Crockery , cutlery , pots and pans Normal soil Crockery and cutlery Any .
5 Fitting under a counter (kitchen worktop or sink) By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.
6 In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Service Force Centre by telephoning: 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
7 Standard Guarantee Conditions We, Zanussi Electrolux, undertake that if within 12 months of the date of purchase this ZANUSSI ELECTROLUX appliance or any part thereof is proved to be defective by re.
Subject to change without notice From the Electrolux Group. The world’ s No.1 choice. The Electrolux Group is the world’ s largest producer of powered appliances for kitchen, cleaning and outdoor use.
1 Instruction Book - Before use - Maintenance - Installation Contents Before use 2 Setting the water softener 2 Filling with salt 2 Filling with rinse aid and adjusting the dose 3 Use of detergent 3 H.
Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5.
Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser , which is positioned inside the door , holds about 1 10 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
4 T o save energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "W ashing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme.
Internal cleaning Ensure that the seals around the door , the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent.
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an enginee r. Before contacting your local Service Force Centre, please carry out the checks listed below .
Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine.
Subject to change without notice 2 03/03 152981 73/2 This appliance complies with the following E.E.C. Directives: - 73/23 or 19.2.73 (Low V oltage Directive) and subsequent modifications; - 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
An important point after buying a device Zanussi DA 4131 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi DA 4131 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi DA 4131 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi DA 4131 you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi DA 4131 will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi DA 4131, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi DA 4131.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi DA 4131. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi DA 4131 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
