Instruction/ maintenance manual of the product CL 50 SI Zanussi
Go to page of 16
REFRIGERA TOR CL 50 SI 2222634-01 INSTRUCTION BOOKLET.
2 Instructions for the User Important Safety Instructions 3 Description of the Appliance 4 Operation 5 Before use 5 Setting the temperature 5 Fresh food refrigeration 5 Normal Operating Sounds 5 Healt.
3 must therefore only be carried out by authorised technicians. ■ T ake utmost care when handling your appliance so as not to cause any damages to the cooling unit with consequent possible fluid leakages. ■ The appliance must not be located close to radiators or boilers.
DESCRIPTION OF THE APPLIANCE 4 ➀ Dairy compartment ➁ Can storage shelf with egg tray ➂ Bottle storage shelf ➃ Salad bin ➄ Glass shelf (for storing fresh meat) ➅ Storage shelves ➆ Thermos.
5 Before use Remove all securing tapes. W ash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger .
6 HEAL TH AND SAFETY GUIDELINES Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever .
MAINTENANCE AND CLEANING 7 D662 CONDENSER COMPRESSOR DEFROST TRA Y Before any maintenance or cleaning work is carried out, DISCONNECT the appliance from the ELECTRICITY supply . W arning This appliance contains hydrocarbons in its cooling unit maintenance and recharging must therefore only be carried out by authorised technicians.
8 Symptom Solution No power to appliance The light does not come on The temperature in the fridge is too high The compressor runs continuously Excessive frost and ice has built up Noise W ater under the salad bin - Check there is power at the socket. - Check there is not a power cut by checking the household lights.
9 SER VICE AND SP ARE P ARTS In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Service Force Centre by telephoning:- 08705 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area.
Standard guarantee conditions We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty work.
11 TECHNICAL SPECIFICA TIONS DIMENSIONS Height 85 cm Width 49.5 cm Depth 60 cm POWER SUPPL Y VOL T AGE AND FREQUENCY 220-240 V / 50 Hz TOT AL POWER ABSORBED 100 W A VERAGE DAIL Y UNITS ELECTRICITY(*) 0,55 kWh GROSS CAP ACITY 140 l NET CAP ACITY 136 l (*)This figure is based on standard test results in accordance with European Standard EN153.
12 Door reversal Before carrying out the operations described below , pull out the mains plug from the wall socket. T o carry out this reversal go through the following steps: 1. Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing.
13 ELECTRICAL CONNECTION W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for your socket outlet, it must be cut off and the appropriate plug fitted.
.
.
© Electrolux plc 2002.
An important point after buying a device Zanussi CL 50 SI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Zanussi CL 50 SI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Zanussi CL 50 SI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Zanussi CL 50 SI you will learn all the available features of the product, as well as information on its operation. The information that you get Zanussi CL 50 SI will certainly help you make a decision on the purchase.
If you already are a holder of Zanussi CL 50 SI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Zanussi CL 50 SI.
However, one of the most important roles played by the user manual is to help in solving problems with Zanussi CL 50 SI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Zanussi CL 50 SI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
