Instruction/ maintenance manual of the product Opus 100 Beyerdynamic
Go to page of 13
BEDIENUNGSANLEITUNG OPERA TING INSTRUCTIONS NOTICE D’UTILISA TION Opus 100 Drahtloses System Wireless System Système sans fil.
16 OPERA TING INSTRUCTIONS Opus 100 Thank you for selecting the Opus 100 wireless system. Please take some time to read carefully through this manual before setting up the equipment. The Opus 100 system has a single frequency in the VHF frequency range 174 to 236 MHz or in the UHF frequency range 798 to 862 MHz.
english 17 1.2 Antennae Fully extend the antennae and set them at an angle of 60° between each antenna. The two antennae are positioned this way to achieve the best pick-up reception. 1.3 Setting up 1. Place the NE 100 diversity receiver in the same room or area as the transmitters.
18 1.6 Setting the Gain First adjust the gain of your transmitter (only TS 100; refer to chapter 3.3). Once the transmitter gain is optimised, it is necessary to match the receiver’ s output gain to your mixing console or P A system. Adjust the gain control (5).
2. SDM 159, SDM 169 and SEM 181 Handheld T ransmitters 2.1 Controls and Indicators (1) Microphone head (fixed) (2) Battery compartment (3) Power On battery condition LED (4) On/Off switch (5) Mute switch 2.2 Setting up 1. Switch on the NE 100 receiver .
20 7. T o avoid popping, try holding the microphone at a slight angle below your mouth. 8. T o avoid covering the integrated antenna by your hand, do not hold the microphone at the microphone head as this could reduce the transmission strength. Furthermore, feedback can occur .
english 21 2. Connect the supplied microphone or instrument cable to the jack socket (4). 3. Switch on the beltpack transmitter by switching the On / Off switch (6) to the “On” position. The power on battery condition LED (5) is illuminated green when the battery has been inserted correctly and has full capacity .
22 4.2 Before the Soundcheck 1. Make sure that the transmitter and receiver are on the same frequency (refer to type plate). 2. Check the transmitter battery and replace or recharge it if necessary . Use fresh alkaline batteries only . 3. Check the performance area for dropouts (i.
english 23 • T ransmitter and receiver have different frequencies • Insufficient battery voltage • Insufficient battery contact, battery inserted incorrectly • Make sure the transmitter and th.
24 8. V ersions Opus 100 V Set consisting of: NE 100 V VHF diversity receiver , TS 100 V VHF beltpack transmitter , instrument cable and bag Opus 150 V Set consisting of: NE 100 V VHF diversity receiver , TS 100 V VHF beltpack transmitter , MCE 60.
english 25 9. Optional Accessories NE 100 Diversity Receiver 19"-Option ZTE 100/200 Shelf for 19"-rack mounting of one NE 100 receiver . . . . . . . Order # 457.051 SDM 159, SDM 169 and SEM 181 Microphones Microphone clamp MKV 11 Microphone clamp .
26 SDM 159 V / U, SDM 169 V / U and SEM 181 V / U Microphones Polar pattern . . . . . . . . . . . . . . . . Supercardioid (SDM 169) / Supercardioid (SDM 159) Cardioid (SEM 181) T ransducer type . . . . . . . . . . . . . . Dynamic (SDM 159, SDM 169) / electret condenser (SEM 181) Frequency SDM 159 V / SDM 169 V / SEM 181 V (VHF) .
english 27.
An important point after buying a device Beyerdynamic Opus 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beyerdynamic Opus 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beyerdynamic Opus 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beyerdynamic Opus 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Beyerdynamic Opus 100 will certainly help you make a decision on the purchase.
If you already are a holder of Beyerdynamic Opus 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beyerdynamic Opus 100.
However, one of the most important roles played by the user manual is to help in solving problems with Beyerdynamic Opus 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beyerdynamic Opus 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
