
(English Edition) User ’ s Manual
AMD Athlon/ Duron/Athlon XP
Socket 462 CPU
AMD Athlon 64 Socket 754 CPU
ZM-WB2 Gold
* Please read before installation

* Zalman Tech. Co., Ltd. is not responsible for any damage resulting from CPU OVERCLOCKING.

Fitting to 8 x 10mm, 8 x 11mm, 10 x 13mm tubes
478/754/462 respectively. Special care should be taken when moving a computer equipped with a cooler which exceeds the relevant weight limit. Zalman Tech Is not responsible for any damage that occurs when moving a computer.
* The specifications of any product may change without prior notice to improve the performance thereof. 1




Intel Pentium 4 Socket 478 CPU
AMD Athlon 64 Socket 754 CPU
AMD Athlon/ Duron/Athlon XP
* The specifications of any product may change without prior notice to improve the performance thereof. 2


①CPU block - 1 pc.
②Hand screw - 2 pcs.
③Thermal grease - 1 pc.
④Clip - 1 pc.
⑬Fittings - 6 pcs. (3 sets)
⑥Two (2) Clip Supports for Socket 478
⑦One (1) A -Type(blue) Clip Support for AMD Socket 462
⑧One (1) B -Type(white) Clip Support for AMD Socket 462
⑨Four Bolts - For Fastening Clip Supports
⑩One Set of Washers

* The specifications of any product may change without prior notice to improve the performance thereof. 3

As shown in Figure 2, a mainboard that is not compliant with the “10.2 mm mainboard component height restriction” standard, introduced by Intel, may create interference between components and the clip. Please do not install the ZM-WB2 when this interference is observed.
10.2mm Motherboard component height restriction

Side View Side View

①This product requires "Heatsink Attach Holes" around
CPU Socket as shown on the right. ②This product can not be installed if any Motherboard
component(capacitor) taller than 1.5cm is located under the clip.
Heat sink attach holes
* The specifications of any product may change without prior notice to improve the performance thereof. 4

1) Keep this product away from children. 2) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the product outside its intended purpose.. 3) The exposed core of a Socket 462 CPU can be damaged if proper care is not taken. Read the “Installation” section thoroughly before installing. 4) Please do not install this product if ZM-WB2 interferes with any mainboard components. 5) Zalman Tech. Co., Ltd. is not responsible for any problems arising from using the ZM-WB2.

Retention Guide Clip Support
* The specifications of any product may change without prior notice to improve the performance thereof. 5


as shown on the right.

Be sure to install A -Type clip support (Blue) next to the lever.
* The specifications of any product may change without prior notice to improve the performance thereof. 6
Paper washer · Bolts



* When installing the ZM-WB2 on an Athlon 64, the retention frame is not needed.
* The specifications of any product may change without prior notice to improve the performance thereof. 7


Inner hole Outer hole
Use the following Zalman products to achieve stable and silent operation of your computer, Noiseless Power Supply, Fanless Coolers for Northbridge Chipset & Video Card, and Noiseless Fan.
ZM80C-HP
* The specifications of any product may change without prior notice to improve the performance thereof. 8
Pages referenced in this manual — manufacturer, support and downloads.
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.