Instruction/ maintenance manual of the product YST-SW216BL Yamaha
Go to page of 20
YST-SW216 Subwoofer System UB OWNER’S MANUAL.
i IMPOR T ANT SAFETY INSTR UCTIONS 1 Read these instr uctions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water. 6 Clean only with dry cloth. 7 Do not block any ventilat ion openings. Install in accordance with the manufacturer’s instruc tions.
ii W e W ant Y ou Listening For A Lifetime YAMAHA and the Electronic I ndustries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
iii Thank you for selecting th is YAMAHA subwoofer system. Please read the following operating precautions before use. YAMAHA w ill not be held responsible for any damage and/or injury caused by not following the cautions below. • To assure the finest perf ormance, please read this manual carefully .
1 SPECIAL INSTRUCTIONS FOR U.K. MODEL For U.K. customers If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.
2 ( : subwoofer, : front speaker) One subwoofer will have a good effect on your audio system, however, the use of two subwoofers is recommended to obtain more effect. If using one subwoofer, it is recommended to place it on the outside of either the right or the left front speaker.
3 Choose one of the following two connec ting methods that is more suitable for your audio system. ■ Choose (pages 3-4) when you w ant to enjoy 5.1 surround system ■ Choose (pages 5-6) when you want to output the low frequency signals Unplug the subwoofer and othe r audio/video components before making connect ions.
4 ■ Using one subwoofer ■ Using two subwoofers CONNECTIONS POWER VOLUME OUTPUT TO SPEAKERS INPUT 2 /MONO HIGH LOW HIGH CUT INPUT 1 FROM AMPLIFIER ON OFF OUTPUT TO SPEAKERS INPUT 2 /MONO HIGH LOW H.
5 Select this method if your amplifier ha s no line output (pin jack) terminal. If your amplifie r has two sets of f ront speaker output t erminals and both te rminals can output sound signals simultaneously.
6 If your amplifier has only one set of front speaker output terminals. Connect the speaker output term inals of the amplifier to the INPUT 1 te rminals of the subwoofer, and connect the OUTPUT terminals of the subwoof er to the front speakers.
7 For connection, keep the sp eaker cables as short as possible. Do not bundle or roll up the excess part of the cables. If the connections are fa ulty, no sound will be heard from the subwoofer or the speakers, or both of them. Make sure that the + and – polarity markings of the speaker cables are obser ved and set correct ly.
8 1 POWER switch Press this switch to the ON position to turn on the power to the subwoofer. When the power of the subwoofer is on, the power indicator ( 4 ) on the rear panel light up in green. Press this switch again to set it to OFF position to turn off the power of the subwoofer.
9 Before using the subwoofer, adjust the subwoofer to obtai n the optimum volume and tone balance between the subwoofer and the front speakers by following the procedures described below. 1 Set the VOLUME control to minimum (0). 2 Turn on the power of all the other components.
10 The frequency respon se of this subwoofer The figures below show the optimum adjustment of each c ontrol and the frequency characte ristics when this subwoofer is combined with a typica l front speaker system. ■ EX.1 When combined with a 4” or 6.
11 In 1988, Yamaha brought to the marketplace speaker systems utilizing YST (Yamah a Active Servo Technology) to give powerful, high qua lity bass reproduction. This technique uses a di rect connection betw een the amplifier and speaker, allowing accu rate signal transmission and precise speaker control.
12 Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions given below do not help, disconnect the power cor d and contact your authorized YAMAHA dealer or service center.
13 Type ..... Advanced Yamaha Ac tive Servo Technology II Driver ....... ........... ........... ........... 25 cm (10”) cone woofer Magnetic shielding type Output Power ............. . 50 W (100 Hz, 5 Ω 10 %T.H.D) Dynamic Power ............... ..
.
.
© 2006 All rights reser ved. YAMAHA ELECTRONICS CORPORATION, US A 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S .A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SC ARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-3 4, 25462 RELLINGEN BEI HAMBURG, GERMAN Y YAMAHA ELECTRONIQUE FRANCE S.
An important point after buying a device Yamaha YST-SW216BL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha YST-SW216BL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha YST-SW216BL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha YST-SW216BL you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha YST-SW216BL will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha YST-SW216BL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha YST-SW216BL.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha YST-SW216BL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha YST-SW216BL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
