Instruction/ maintenance manual of the product RX-V595RDS Yamaha
Go to page of 67
RX-V595RDS Natural Sound A V Receiver Récepteur audiovisuel OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING B G Printed in France ID V296030 Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE.
2 SUPPLIED A CCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTE ZUBEHÖRTEILE MEDFÖLJANDE TILLBEHÖR ACCESSORI IN DO T AZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE A CCESSOIRES • After unpacking, check that the following parts are included. • Après le déballage, vérifier que les pièces suivantes sont incluses.
3 English ● 5 Speaker Configuration Main: 65 W + 65 W (8 Ω ) RMS Output P ower , 0.04% THD , 20 Hz – 20 kHz Center: 65 W (8 Ω ) RMS Output P ower , 0.
4 CA UTION : READ THIS BEFORE OPERA TING Y OUR UNIT . 1. T o assure the finest performance, please read this manual carefully . Keep it in a safe place for future reference. 2. Install this unit in a cool, dry , clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold.
5 English FEA TURES ON SOUND EFFECT This unit incorporates a sophisticated, multi-program digital sound field processor . The processor allows you to electroni- cally expand and change the shape of the audio sound field from both audio and video sources, creating a theater-like experience in your listening room.
6 Manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
7 English CONTR OLS AND THEIR FUNCTIONS FR ONT P ANEL 1 ST ANDBY/ON Press this switch to turn the power of this unit on. Press it again to turn this unit into the standby mode. Standby mode In this state, this unit consumes a very small quantity of power to receive infrared-signals from the remote control transmitter .
8 q INPUT MODE Switches the DVD/LD and TV/DBS input signal mode (AUT O/ ANALOG). w VOLUME This control is used to raise or lower the volume level. e PHONES jack When you use headphones, connect the headphones to the PHONES jack. Y ou can listen to the sound to be output from the main speakers through headphones.
9 English 1 Multi-information display Displays various information, for example station frequency , preset station number and name of selected input source. 2 MEMOR Y indicator When MEMOR Y is pressed, this indicator flashes for about five seconds. During this period, the displayed station can be stored to the memory .
10 SPEAKER SETUP This unit is designed to provide the best sound-field quality with a 5-speaker configuration, using main speakers, rear speakers and a center speaker . The main speakers are used for the main source sound plus the effect sounds. They will probably be the speakers from your present stereo system.
11 English SPEAKER PLACEMENT When you place the speakers, refer to the following diagram: Main: The position of your present stereo speaker system. Rear: Behind your listening position, facing slightly inward. Nearly 1.8 m (approx. 6 feet) up from the floor .
12 CONNECTIONS Never plug in this unit and other components until all connections are completed. CONNECTIONS WITH OTHER COMPONENTS When making connections between this unit and other components, be sure all connections are made correctly , that is to say L (left) to L , R (right) to R , “ + ” to “ + ” and “ – ” to “ – ”.
13 English R L R L SWITCHED A C OUTLET(S) (Europe model) .................................. 2 SWITCHED OUTLETS (U.K. model) .......................................... 1 SWITCHED OUTLET Use these to connect the power cords from your components to this unit.
14 CONNECTING T O DIGIT AL (CO AXIAL AND/OR OPTICAL) TERMINALS If your DVD (LD) player , TV/DBS tuner , etc. are equipped with coaxial or optical digital audio signal output terminals, they can be connected to this unit’s CO AXIAL and/or OPTICAL digital signal input terminals.
15 English CONNECTING T O S VIDEO TERMINALS If you have a VCR and a monitor equipped with “S” (high- resolution) video terminals, those terminals can be connected to this unit’s S VIDEO terminals.
16 Note Use speakers with the specified impedance shown on the rear panel of this unit. Note on main speaker connections: One or two speaker systems can be connected to this unit. If you use only one speaker system, connect it to either the SPEAKERS A or B terminals.
17 English OUTPUT TERMINALS (FOR DRIVING SPEAKERS WITH EXTERNAL AMPLIFIERS) MAIN OUTPUT terminals These terminals are for the main channel line output.
18 IMPED ANCE SELECT OR SWITCH Select the position whose requirements your speaker system meets. (Upper position) Main: If you use one pair of main speakers, the impedance of each speaker must be 4 Ω or higher . If you use two pairs of main speakers, the impedance of each speaker must be 8 Ω or higher .
19 English Connecting the AM loop antenna * The AM loop antenna should be placed away from this unit. The antenna may be hung on a wall. * The AM loop antenna always should be connected, even if an outdoor AM antenna is connected to this unit. PHONO 75 Ω UNBAL.
20 ADJUSTMENTS BEFORE USING THIS UNIT SELECTING THE OUTPUT MODES This unit provides you the following five functions to determine the method of distributing output signals to speakers suitable for your audio system. When speaker connections are all completed, select a proper position on each function to make the best use of your speaker system.
21 English ADJUSTING METHOD Operations should be made while watching the information on this unit’s display . If you are using the remote control transmitter , set the SELECT OR DIAL to the AMP/TUN or DSP position on the remote control transmitter .
22 SPEAKER B ALANCE ADJUSTMENT This procedure lets you adjust the sound output level balance between the main, center and rear speakers using the built-in test tone generator . When this adjustment is performed, the sound output level heard at the listening position will be the same from each speaker .
23 English 6 T urn up the volume. Remote control Y ou will hear a test tone (like pink noise) from the left main speaker , then the center speaker , then the right main speaker , then the right rear speaker , and then the left rear speaker , for about two seconds each.
24 8 Adjust the sound output levels of the center speaker and the rear speakers so that they become almost as same as that of the main speakers. Remote control a) Press or once or more so that “CENTER”, “R SUR.” or “L SUR.” appears on the display .
25 English B ASIC OPERA TIONS T O PLA Y A SOURCE 3 Select the desired input source by using INPUT . (For video sources, turn the TV/monitor ON.) See page 27 if you are using an external decoder or playing a tape or an MD. Front panel Remote control or The name of the selected input source will appear on the display .
26 8 If desired, adjust B ASS , TREBLE , BALANCE , etc. (see below) and use the digital sound field processor . (see page 40.) Selecting the SPEAKER system Because one or two speaker systems (as main speakers) can be connected to this unit, SPEAKERS allow you to select speaker system A or B , or both at once.
27 English T o play a tape or an MD Press T APE/MD MON / EXT . DECODER so that the “T APE/MD MON” indicator lights up on the display , then play the tape or MD. Front panel Remote control or T o stop playing the tape or MD, press T APE/MD MON / EXT .
28 T O RECORD A SOURCE T O T APE OR MD 4 1 2 2 1,4 1 Select the source to be recorded. Front panel Remote control or 2 Play the source and then turn V OLUME up to confirm the input source. (For detailed information on tuning, see page 29.) Front panel Remote control or 3 Begin recording on the tape deck, MD recorder or VCR connected to this unit.
29 English A UT OMA TIC TUNING 1 Select the reception band (FM or AM) confirming it on the display . Front panel or 2 Press TUNING MODE (so that the “AUTO TUNING” indicator lights up on the display). Front panel Lights up. 3 T o tune in to a higher frequency , press the UP side of TUNING once.
30 MANU AL PRESET TUNING This unit can store station frequencies selected by tuning. With this function, you can recall any desired station simply by selecting the preset station number with which it was stored. Up to 40 stations (8 stations x 5 groups) can be stored.
31 English T o recall a preset station (See the illustration on previous page.) 1 1 Select the group of preset stations. Front panel Remote control or 2 2 Select the preset station number . Front panel Remote control or Notes • A new setting can be stored in place of the former one.
32 T o store stations 1 Select the FM. Front panel 2 Press TUNING MODE (so that the “AUT O TUNING” indicator lights up on the display). Front panel Lights up.
33 English EXCHANGING PRESET ST A TIONS Y ou can exchange the places of two preset stations with each other as shown below. 3 Next, recall the preset station on A5 by following the same procedures as in step 1. Flashes. 4 Press EDIT once more. Front P anel Shows the exchange of stations is completed.
34 PS (Pr ogram Service name) mode: The name of the RDS station now being received is displayed. PTY (Pr ogram T ype) mode: The type of the program on the RDS station now being re- ceived is displayed. There are 15 program types to classify RDS stations.
35 English CHANGING THE RDS MODES When an RDS station is received, PS, PTY , RT and/or CT that correspond to the RDS data services employed by the station light up on the display . By pressing RDS MODE , you can change the display mode among the RDS modes employed by the received station in the order shown below .
36 3 Press PTY SEEK ST AR T to begin searching all preset RDS stations. Front panel Flashes. * The “PTY HOLD” indicator lights up on the display . * If the station that is broadcasting a program of the program type is found, the unit stops at the station and displays the frequency of the station.
37 English PROGRAM TYPES IN THE PTY MODE NEWS AFF AIRS INFO SPOR T EDUCA TE DRAMA CUL TURE SCIENCE V ARIED News: Short accounts of facts, events and publicly expressed views, reportage and actuality .
38 EON FUNCTION This function uses the EON (Enhanced Other Networks) data service on the RDS station network. By simply selecting a desired program type (NEWS, INFO, AFF AIRS or SPORT), the unit will .
39 English SETTING THE SLEEP TIMER If you use the SLEEP timer of this unit, you can make this unit automatically switch to the standby mode. When you are going to sleep while enjoying a broadcast or other desired input source, this timer function is useful.
40 FEA TURE Reproduces video discs, video tapes and similar sources which are Dolby Surround encoded and bear the “DOLBY SUR- ROUND” logo. The built-in Dolby Pro Logic Surround decoder or Dolby Digital decoder precisely reproduces sounds and sound effects of a source encoded with Dolby Surround.
41 English FEA TURE This program is designed specifically to enhance mono source programs. Compared to a strictly mono setting, the sound image created in this mode is wider and slightly forward of the speaker pair , lending an immediacy to the overall sound.
42 2 2 PLA YING A SOURCE WITH THE DIGIT AL SOUND FIELD PR OCESSOR (DSP) EFFECT 1 Follow steps 1 to 7 shown in “BASIC OPERA TIONS” on pages 25 to 26. 2 Select the desired DSP program that is suitable for the source. Front panel Remote control or Press DSP .
43 English T o enjoy a video sour ce with the Dolby Pr o Logic Surround or Dolby Digital decoded When you select the program DOLBY PRO LOGIC/DOLBY DIGIT AL , DOLBY PRO LOGIC ENHANCED/DOLBY DIGIT AL EN.
44 2 Press + or – to adjust the settings for delay time or speaker output levels. Front panel Remote control or 3 Repeat steps 1 to 3 to adjust settings on any other item.
45 English Adjusting delay time Y ou can adjust the time difference between the beginning of the sound from the main speakers and the beginning of the effect sound from the rear speakers. The larger the value, the later the effect sound is generated. This adjustment can be made to all programs individually .
46 7. D .RNG (Adjusting dynamic range) Choices: MAX/STD/MIN Preset position: MAX * This adjustment is effective only when the Dolby Digital is decoded. MAX: “Dynamic range” is the difference between the maximum level and the minimum level of sounds.
47 English 8. C.DELA Y [Adjusting the delay of center sounds (dialog etc.)] Control range: 0 ms to 5 ms (in 1 ms step) Preset value: 0 ms * This adjustment is effective only when the Dolby Digital is decoded and the signals of selected source encoded with the Dolby Digital contain center-channel signals.
48 Y ou can use this remote control transmitter to control not only this unit but also other components connected to it. This is factory set to control this unit and most YAMAHA audio components. T o control other brands of components, you must preset the remote control transmitter with the manufacturer ’s codes listed on pages 397 to 402.
49 English ■ AMP/TUN Note: TV PO WER and TV V OLUME function if you have preset the code for your TV . 1 PO WER This button turns this unit on. 2 INPUT Press these buttons to select the program source. 3 EXT . DEC. Press this button when using a external decoder .
50 Faintly colored buttons do not function. For the buttons which are not described here, see “AMP/TUN” on page 49. For details, please refer to the owner’ s manual f or each component. 1 q e w 6 d s p ■ CD ■ T APE/MD Note: TV PO WER , TV V OLUME and TV INPUT function if you have preset the code for your TV .
51 English ■ DVD MENU Faintly colored b uttons do not function. For the buttons which are not described here, see “AMP/TUN” on page 49. For details, please refer to the owner’ s manual f or each component.
52 ■ CBL/DBS Note: TV PO WER , TV V OLUME and TV INPUT function if you have preset the code for your TV . ■ VCR Note: TV POWER , TV V OLUME and TV INPUT function if you have preset the code for your TV . POWER DISPLA Y CHANNEL CHANNEL ENTER VCR REC Press this button twice to start recording.
53 English SETUP CODES T o use a second (and third) VCR Y ou can use the CBL/DBS and/or DVD MENU positions to control a second VCR (and/or third) if a CBL (or DBS) or DVD player is not used. If you are using the DVD MENU position for a second (or third) VCR, you must preset a code for an LD player to the DVD/LD position.
54 NO TES ABOUT THE REMO TE CONTROL TRANSMITTER Battery installation Battery replacement If the remote control transmitter operates only when it is closed to this unit, the batteries are weak. Replace both batteries with new ones. Be sure to replace batteries within about two minutes.
55 English SYMPT OM The unit fails to turn on when ST ANDBY/ON is pressed, or turns into the standby mode suddenl y soon after the power is turned on. The unit does not work normall y . No sound or no picture. No picture . The sound suddenly goes off .
56 SYMPT OM FM stereo reception is noisy . There is distortion and clear reception cannot be obtained even with a good FM antenna. The desired station cannot be tuned in with the automatic tuning method. Previously preset stations can no longer be tuned in.
57 English AUDIO SECTION Minimum RMS Output Power MAIN L/R 8 ohms, 20 Hz to 20 kHz, 0.04% THD ............................................. 65 W + 65 W CENTER 8 ohms, 20 Hz to 20 kHz, 0.04% THD .........................................................
58 AM SECTION T uning Range ...................... 531 to 1,61 1 kHz Usable Sensitivity ............................ 300 µV/m Signal-to-Noise Ratio ............................ 52 dB Antenna .................................... Loop antenna Output Level (30% mod.
397 TV Manufacturer Code Abex 0032 Acura 0009 Admiral 0093, 0163, 0213 Adyson 0217, 0032 Akai 0208, 0361 Akura 0218, 0264, 0369 Alaron 0216 Alba 0037, 0218, 0371, 0009, 0036, 0235 Allorgan 0294 Ampliv.
398 Pathe Cinema 0216, 0320, 0213, 0238 Pathe Marconi 0196, 0198, 0205, 0333 Pausa 0009 Penney 0032 Perdio 0320 Phase 0032 Philco 0074, 0076, 0084, 0213, 0247 Philips 0037, 0374, 0554, 0012, 0043, 032.
399 CABLE Manufacturer Code ABC 1003, 1008, 1014, 1017 Birgmingham Cable Communications 1276 British T elecom 1003, 1 105 Cabletime 1 161, 1271, 1377 Clyde 1086 Contec 1019 Decsat 1423 Filmnet 1443 Fr.
400 Skymaster 2288, 2605, 2519 Star T rak 2421 Strong 2421 Sunstar 2513 TPS 2820 T antec 2455, 2297, 2336 T echniSat 2262, 2501 T echniland 2346 T elefunken 2421 T eleka 2243, 2613 T elesat 2605 Thoms.
401 Noblex 3240 Nokia 3106, 3046, 3041, 3104, 3240 Nordmende 3320, 3384, 3041, 3297, 3321 Oceanic 3000, 3041 Okano 3315, 3348 Olympus 3226 Optimus 3037, 3432, 3048, 3104, 3162 Orion 3209, 3004, 3036, .
402 CD PLA YER Manufacturer Code Aiwa 6124, 6157, 6419 Akai 6108, 6156, 6199 Alba 6536, 6288, 6334 Arcam 6157 Audio Research 6157 Audio T on 6157 Audiolab 6157 Audiomeca 6157 BSR 6134 Bestar 6164 Bina.
RX-V595RDS Natural Sound A V Receiver Récepteur audiovisuel OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING B G Printed in France ID V296030 Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE.
Quick Reference Card AMP/TUN DSP TAPE/MD CD DVD/LD POWER INPUT EXT. DEC. A/B/C/D/E DSP selector PRESET UP DOWN VOLUME MUTE SLEEP (TV POWER) TIME/LEVEL DSP program STANDBY SELECTOR DIAL TEST EFFECT ON/.
Quick Reference Card AMP/TUN DSP TAPE/MD CD DVD/LD POWER INPUT EXT. DEC. A/B/C/D/E DSP selector PRESET UP DOWN VOLUME MUTE SLEEP (TV POWER) TIME/LEVEL DSP program STANDBY SELECTOR DIAL TEST EFFECT ON/.
An important point after buying a device Yamaha RX-V595RDS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha RX-V595RDS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha RX-V595RDS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha RX-V595RDS you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha RX-V595RDS will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha RX-V595RDS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha RX-V595RDS.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha RX-V595RDS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha RX-V595RDS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
