Instruction/ maintenance manual of the product RX-A1000 Yamaha
Go to page of 136
Owner’ s Man ual A V Receiver English f or Oceania.
En 2 BEFORE USE About this manual Supplied accessories Check that you receiv ed all of the following parts. • Remote control • Batteries (AAA, R03, UM-4) x 2 • Power c able • YP A O microphone.
En 3 CONTENTS INTRODUCTION Featur es and capabilities ................. ....................... ........... 5 Using the TV OSD to operate th e unit ............ ................. 6 Basic operation of OSD menu ........... .......................... ...
En 4 SETUP Conf iguring input sources (Input menu) ..... .................. 77 Configuring input sources ................. ....................... ...... 77 Input menu ............. .................... ................... .................. 78 Editing the SCENE function (Scene menu) .
En 5 INTRODUCTION ■ Built-in high-quality , high-p ower 7-c hannel amplifier ■ Multi-channel speaker co nfiguration capability – 2- to 7.1-ch annel speaker configurations ...... ................. ................. ................ ..............
INTRODUCTION En 6 This unit features a sophisticated on-scree n display (OSD) for the TV screen. The OSD is de signed to enable visual guidance tha t simplifies operations. The OSD mainly displays the ON SCREEN and Option menus, as well as the content window that displays the content of current input sources.
INTRODUCTION Using the TV OSD to operate the unit En 7 ■ Adjust acoustic parameters to matc h your speaker s and listening en vironment – Specify speaker acoustic parameters automatically (Y amaha Parametric Room Acoustic Optimizer - YP A O) .....
INTRODUCTION En 8 Front panel a MAIN ZONE A (Po wer) Switches this unit between on and standby mode. b HDMI Through/iP od Charge indicator Lights up in any of the following cas es while the unit is in standby mode.
En 9 INTRODUCTION Part names and functions Front panel with the cover opened g ON SCREEN T urns on and off the ON SCREEN menu. h OPTION T urns on and of f the Option menu ( ☞ p. 54 ). i T ONE/BALANCE Adjusts high-frequen cy/low-f requency output of speak ers/headphones in each zone ( ☞ p.
En 10 INTRODUCTION Part names and functions Rear panel a PHONO jacks For co nnecting a tu rntable ( ☞ p. 31 ). b DOCK jack For connecting an optional Universa l Dock f or iPod (such as YDS- 12), W ireless Sy stem for iPod (Y ID-W10), or Bluetooth Wireless Audio Receiver (YB A-10) ( ☞ p.
En 11 INTRODUCTION Part names and functions Front panel display a T uner indicator Light up according to the status of a received station ( ☞ p. 59 ). b ZONE2 indicator Lights up when the audio and video outp ut to Zone2 is enabled ( ☞ p. 119 ). c SLEEP indicator Blinks when the sleep timer is on ( ☞ p.
En 12 INTRODUCTION Part names and functions Remote control a Remote control signal transmitter T ransmits infrared signals. b MAIN/ZONE2 Switches the zone to be operated by the remote c ontrol between the Main zone an d Zone2 ( ☞ p. 119 ). c SOURCE A (SOURCE P ower) Switches an external component on and off.
En 13 INTRODUCTION Part names and functions Remote control (sequel) k Cur sor B / C / D / E , ENTER, RETURN l External component operation keys Operate recording, playback, and me nu display s etc. for ex tern al components ( ☞ p. 106 ). J 1 m Numeric keys Enter numbers.
INTRODUCTION Part names and functions En 14 On-screen display When a TV is connected to this unit, the supplied remo te control can be used to specify and v erify this unit’ s settings via menus and opti ons displayed on the TV screen. The following displays are a vai lable in the on-screen display .
En 15 CONNECTIONS This unit uses acoustic field effects and sound decoders to bri ng you the impact of a real movie theater or concert ha ll. These effects will be brought to you with ideal speaker positioning and connections in your listening en vironment.
CONNECTIONS Connecting speakers En 16 Speaker layout In addition to the 7.1-channel speak er layout, a variet y o f speaker configuratio ns can be specified with presence speaker connect ion, bi-amp connection or the Zone2 function.
CONNECTIONS Connecting speakers En 17 ■ Adding the presence speaker s for a ric her sound field effect ■ Presence speaker lay out (7 speakers + subw oofer + presence speakers) ■ Connections of speakers ■ Assigning a speaker configuration ■ Enjoying the audio sour ce without surround bac k speakers ■ 5.
CONNECTIONS Connecting speakers En 1 8 ■ Using the fr ont speakers that support bi-amp connections for a high quality sound ■ 5.1-channel speaker la yout (Fr ont speakers (Bi-amp) + 3 speakers) ■ Connections of speakers ■ Assigning a speaker configuration ■ Using speakers in tw o rooms (Zone2 function) ■ 7.
CONNECTIONS Connecting speakers En 19 Connecting speakers and subwoofers Connect your speakers to their respective terminals on the rear panel. ■ Front/Center/Surr ound/Sur round bac k speaker and Subwo ofer connection When connecting only one surround back speaker , connect the speaker to the SURR OUND B A CK L (SINGLE) jacks.
CONNECTIONS Connecting speakers En 20 ■ Bi-amp connection This unit can be connected to speakers that support bi-amp connections. When conne cting speakers, connect the FR ONT jacks and the SURR OUND BA CK /BI-AMP jacks as in the diagram below . Conf igure the bi-amp sett ings to activate conn ections.
CONNECTIONS Connecting speakers En 21 3 Check that “SPEAKER IMP .” is displayed on the front panel. 4 Press STRAIGHT repeatedly to select a “6 Ω MIN. ” 5 Switch this u nit to the standb y mode, and then switc h it on again. The power turns on, when the settin gs you made has been configured.
CONNECTIONS En 22 Speaker layout utilizi ng an external power amplifier More speakers can be used b y c onnecting an e xtern al amplifier to this unit’ s PRE OUT jacks. The sp eaker layout specif ied using the Power Amp Assign function v aries wh en an external amplifier is connected.
CONNECTIONS En 23 Jacks and cables This unit is equipped with the following input/out put jacks. Use jacks and cables appropriate for components that you are going to connect. ■ A udio/Video jacks HDMI jac ks Digital video and digital sound ar e transmitted through a single jack.
CONNECTIONS Connecting external components En 24 Connecting a TV monitor This unit is equipped with the following four types of output jack for connection to a TV . HDMI OUT 1-2, COMPONENT VI DEO, S-VIDEO or VIDEO. Se lect the proper connection according to the input signal format suppo rted by your TV .
CONNECTIONS Connecting external components En 25 ■ Connecting an HDMI video monitor Connect the HDMI cable to one of the HDMI OUT 1-2 jacks. ■ Connecting a component video monitor Connect the component video cable to the COMPONENT VIDEO (MONIT OR OUT) jacks.
CONNECTIONS Connecting external components En 26 ■ Connecting a video monitor Connect the video pin cable to the VIDEO (MONITOR OUT) jack. ■ Listening to TV audio T o transmit sound from the TV to.
CONNECTIONS Connecting external components En 27 Connecting BD/DVD play ers and other devices This unit has the follo wing input jacks. Conn ect them to the appropr iate output jacks o n the playback devices such as BD/D VD players.
En 2 8 CONNECTIONS Connecting external components ■ Connecting BD/D VD pla yers and ot her de vices with component video cables Connect the device with a co mponent vide o cable to one of the A V1-4 input jacks. Using optical digital audio output sources Connect the playback device to the A V3 or A V4 jacks.
En 29 CONNECTIONS Connecting external components ■ Connecting BD/D VD pla yers and other devices with S-video cable s Connect the playback de vice with a S-vide o cable to one of the A V1-4 input jacks. Using optical digital audio output sources Connect the playback device to the A V3 or A V4 jacks.
En 30 CONNECTIONS Connecting external components ■ Connecting BD/D VD pla yers and ot her de vices with video cables Connect the playback de vice with a video pin cable to one of the A V1-4 input jacks. Using optical digital audio output sources Connect the playback device to the A V3 or A V4 jacks.
En 31 CONNECTIONS Connecting external components ■ Connecting CD play ers a nd other audio de vices Using analog stereo out put sources Connect the playback de vice to the A UDIO1, A UDIO2, A UDIO3 or A UDIO4 jacks. Using optical digital output sources Connect the playback de vice to the A UDIO1 jack.
En 32 CONNECTIONS Connecting external components Connecting game consoles or video camcorders Use the VIDEO A UX jacks on the front panel to tempor arily connect de vices such as a game console or video camcorder to the receiver . Select the V -A UX input to use these connected devices.
En 33 CONNECTIONS Connecting external components Connecting a SCENE link playback-co mpatible device When the components are the Y amaha products and ha ve the capability of the transmission of the re.
En 34 CONNECTIONS Connecting external components Connecting audio/vid eo recording devices This receiv er can transmit sele cted incoming audio/video signals to e xternal components through the A V OUT jacks. Y ou can record these input audio and video signals to VCRs or similar de vices, or send them to other TVs or external components.
En 35 CONNECTIONS Connecting external components Connecting a USB storage device Connect a USB memory device or US B portable audio player to the USB port on the front panel of this unit. NO TE Be careful that the USB storage device is f acing the correct way wh en inserted into the USB port of this unit.
CONNECTIONS En 36 An indoor FM antenna and an AM loop antenna are supplied with this receiv er . Connect these antennas properly to their respecti ve jacks.
CONNECTIONS En 37 This unit is equipped with a Y amaha Parametric Room Acoustic Op timizer (YP A O) that adjusts the conf iguration, size, and volume balance of the speakers in order to provide an optimal sound field.
CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 3 8 4 Connect the YP AO micr ophone to the YP AO MIC jack on the f r ont panel. “Mic On V iew ON SCREEN” appears on the front panel display , and the follo wing display appears on the front panel display or TV screen.
CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 39 When “Multi P osition” is set to “No” in step 5 The follo wing display a ppears when measuremen t finishes without an y problems.
CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 40 8 Press k Cursor B / C to select “Save/Exit” and press k ENTER . 9 Press k Cursor D / E to select “SA VE” and press k ENTER . 10 Press k ENTER . Automatic setup is completed.
CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 41 ■ Revie wing automati c setup parameters The results of automa tic acoustics measurement can b e revi ewed once measureme nt is complete. 1 Press k Cursor B / C repeatedly to select “Result” and press k ENTER immediately after the automatic measurement.
CONNECTIONS Setting up the speaker parame ters automatically (YPAO) En 42 ■ When an error message is display ed during measurement See “Error messages” ( ☞ p. 43 ) for instructions on resolving the problem and measure acoustics again. Check the error code displayed and use YP A O to measure acoustics again as described below .
En 43 CONNECTIONS Setting up the speaker parame ters automatically (YPAO) ■ Message list ■ When a warning message is display ed before measurement ■ Error messa ges ■ W arning messages NO TE If the followin g messages appear, resolv e the pr oblems that hav e occurred and carry out the measurement process again.
En 44 PLA YBACK 1 T urn on external co mponents (TV , DVD play er , etc.) connected to this unit. 2 Use the d Input selector to select the input source. The name of the selected i nput source is displayed on the front panel display . J 1 When USB, NET, DOCK or TUNER is selected, the content windo w is displayed ( ☞ p.
En 45 PLA YBACK Basic playback procedure ■ Adjusting high/low-frequenc y sound (T one control) Y ou can adjust the balance of the high- frequency range (T reble) and low-frequenc y range (Bass) of sounds output from the front left and right speakers to obtain desired tone.
PLA YBACK En 46 This unit has a SCENE function th at allo ws you switch this unit on and change input sources, the settings of Audio Select, HDMI Output, Sound Program, Pure Direct Mode, T one Control, Adaptive DRC, and Compressed Music Enhan cer with one key .
PLA YBACK En 47 This unit is also equipped with a Y amaha digital sound field processing (DSP) chip. Multi-channel playback from almost an y audi o source can be enjoyed using a variety of sound decoders and va rious sound field effect programs stored on the chip.
PLA YBACK Enjoying favorite sound field effect En 4 8 ■ Enjoying more spatial sound fields (CINEMA DSP 3D mode) CINEMA DSP 3D mode cr eates an intensive and accurate st ereoscopic sound f ield in the list ening room. Connection of presence spea kers is recommended to take full adv antage of the effects of CINEMA DSP 3D mode.
PLA YBACK Enjoying favorite sound field effect En 49 Enjoying Hi-Fi Sound Quality (Pure Direct Mode) Use Pure Dire ct Mode to en joy the pure high fi delity sound of the selected source. When Pure Direct Mode is enabled, this u nit plays back the se lected source with the least circuitry .
PLA YBACK Enjoying favorite sound field effect En 50 Sound programs ■ Category: CL ASSICAL This sound f ield is suitable when liste ning to music sources such as CDs. ■ Category: LIVE/CLUB This sound f ield is suitable when liste ning to music sources such as CDs.
PLA YBACK Enjoying favorite sound field effect En 51 ■ Category: MO VIE Sound programs optimized fo r viewi ng video sources such as mov ies. ■ Category: STEREO Sound programs are optimized fo r listening to stereo sources. ■ Category: SUR.DECODE (Surround decode mode) Select this program to playback sources with selected decode rs.
PLA YBACK En 52 This unit features a sophisticated on-screen display (OSD) that helps you to control the amplifier function of this unit. W ith the OSD, you can view information of the signals being input and the status of this unit. V isual guidance sim plif ies operations for menus.
PLA YBACK Controlling this unit while vi ewing the TV screen En 53 ■ Selecting a sound program 1 Use k Cursor B / C to select “Sou nd Program” and press k ENTER . Sound program icons are displa yed at the bottom of the TV screen. 2 Use k Cursor D / E to select a s ound program and press k ENTER .
PLA YBACK En 54 This unit has a unique Option menu for each input source. Option menus can be used to enable features such as volume trim for c ompatible input sources or to display audio/video data. Option menu display and setup Option menu operations are disp layed on the front panel display or TV screen.
PLA YBACK Configurin g settings specific to an individual in put source (Option m enu) En 55 Option menu The following items are pro vided for each input source.
PLA YBACK Configurin g settings specific to an individual in put source (Option m enu) En 56 ■ Adjusting high/low-frequenc y sound T one Control Y ou can adjust the balance of the high- frequency range (T reble) and low-frequenc y range (Bass) of sounds output from the front left and right speakers to obtain desired tone.
PLA YBACK Configurin g settings specific to an individual in put source (Option m enu) En 57 ■ Adjusting v olume between input sour ces Vol ume T r im Reduces any change in v olume when switch ing between input sources b y correcting vol ume differen ces in each input source.
PLA YBACK En 5 8 When USB, NET, DOCK or TUNER is selected, the content window is displayed on the TV screen. Playback style for iPod, functions for FM/AM tuner , Internet Radio, PC, and USB can be set in the content windo w . Displaying the content window on the TV screen Press d USB , d NET , d DOCK or d TUNER to displa y the conten t window .
PLA YBACK En 59 Selecting a frequency for reception (Normal tuning) 1 Press d TUNER to switch to th e tuner input. 2 Press e FM or e AM to select a band to receive . 3 Use e TUNING H / I to set a frequency to receive . e TUNING H Increases the frequenc y .
PLA YBACK FM/AM tuning En 60 Navigating the FM/AM tuner from the content window The station currentl y receiv ed can be confirmed from the menu displayed on the TV screen. V arious FM/AM tuner operations can be performed from the content windo w rather than controls on the front panel display .
PLA YBACK FM/AM tuning En 61 Preset Select Y ou can call preset stations. Utility Scroll Switches the scroll tar get. Browse Switches the display to the Bro wse view . ■ Operating fr om the Bro wse view a Preset station list The list of preset stations is displa yed.
PLA YBACK En 62 Y ou can enjoy playback of audio f iles stored on PCs connected to this unit via your network. T o play back audio files on your P C, you need to install W indows Media Player on the PC and conf igure the media sharin g setting of W indows Media Player .
PLA YBACK Playing back tunes on the PC En 63 ■ Operating fr om the Now Pla ying view a Repeat icon b Shuffle ico n c Play icon d Album image e Artist name f Album title g Screen button area Buttons for av ailable opera tions are displayed. See “Screen buttons on the No w Playing view” for details.
PLA YBACK En 64 Y ou can enjoy playback of W A V (PCM format only), MP3, WMA, MPEG -4 AA C and FLAC files stored on your USB memory device or USB po rtable player connected to the USB port on the front panel of this unit. This unit suppor ts USB mass storage class devices (F A T 16 or F A T 32 format, ex cept USB HDDs).
PLA YBACK Playing back tu nes on the USB stor age devices En 65 ■ Operating fr om the Now Pla ying view a Repeat icon b Shuffle ico n c Play icon d Album image e Artist name f Album title g Screen button area Buttons for av ailable opera tions are displayed.
PLA YBACK En 66 Y ou can listen to Internet Radio stations using the vT uner Intern et Radio station database servic e particularly customized for this unit, providing a database of ov er 2000 radio stations. Also, you can store your fa vorite stations with bookmarks.
PLA YBACK Listening to the Internet Radio En 67 ■ Operating fr om the Now Pla ying view a Play icon b Album image c Elapsed time d Current station name e Screen button area Buttons for av ailable opera tions are displayed. See “Screen buttons on the No w Playing view” for details.
PLA YBACK En 68 Use this feature to access the desire d music sources (W A V, MP 3 and WMA files on th e connected PC or USB storage dev ices and In ternet Radi o Stations) directly .
PLA YBACK En 69 Once you hav e connected a Universal Dock for iPod (such as the YDS-12, sold separately) to this unit, you can enjoy playback of your iPod/iPhone using the remote control supplied with this unit.
PLA YBACK Playing back tunes from yo ur iPod™/iPhone™ En 70 Playing iPod™/iPh one™ from the menu screen (Menu browse control) The iPod/iPhone can be operated from the menu displayed on the TV screen. Y ou can operate the iPod/iPhone from the Now Playing vie w or the Browse vie w .
PLA YBACK Playing back tunes from yo ur iPod™/iPhone™ En 71 Screen b uttons on the Now Playing vie w T o use these buttons, f irst press k ENTER . Then select the desir ed one with k Cursor B / C and k ENTER . Play Control Operates the basic playback functions of iPod/iPhone.
PLA YBACK Playing back tunes from yo ur iPod™/iPhone™ En 72 Place the iPod/iPhone in the wirele ss transmitter . Setup is complete. When this unit is in standby mode, iPod/iPhone can be char ged automatically , if “Standb y Charge” is se t to “Auto” ( ☞ p.
PLA YBACK En 73 Y ou can connect a Y amaha Bluetooth W ireless Audio Receiver (such as the YB A-10, sold separately) to this unit and enjoy wireless playbac k from Bluetooth-compatible portable music players.
PLA YBACK Playing back tu nes from Blueto oth™ components En 74 Using Bluetooth™ components When pairing is complete, perform the following procedure to achie ve a wire less connection between th is unit and the Bluetooth com ponent. When the wireless connection is comple te, Bl uetooth components can be played back.
PLA YBACK En 75 Displaying and Operating W eb Control Center Y ou can operate this unit by usi ng a web bro wser . Y ou can select the input source and sound field program, bro wse the iPod or network.
PLA YBACK Controlling this unit by using the Web browser (Web Control Center) En 76 Zone contr ol menu Y ou can control the selected zone. a PLA Y INFO Controls the selected input for each zone. b TO P M EN U Returns to the top menu. c SCENE keys Selects the scene.
En 77 SETUP Settings, such as the name of an input source or the icon displayed for an input source can be changed from the Input menu. Configuring input sources The name of an input sour ce an d its icon, as well as other input source settin gs, can be changed from the Input menu displayed on the TV screen .
SETUP Configuring inpu t sources (Input menu) En 7 8 Input menu ✓ : av ailable menu for ea ch input source ■ Changing an input sour ce name or icon Rename/Icon Select Changes the input source name (up to nine characters) and icon displayed on the front panel display or TV screen.
SETUP Configuring inpu t sources (Input menu) En 79 ■ Setting the format of digital audio signals Decoder Mode Sets the format of digi tal audio to playback to DTS. For example, if the format is not automatically detec ted correctly e ven during playback of DTS format audio, th is item can be used to set the playback format to DTS.
SETUP En 8 0 The SCENE function ( ☞ p. 46 ) can be edited from the Scene menu displayed on the TV screen. Editing a scene V arious settings, such as the name of a scene or the icon displayed for a scene, can be changed from the Scen e menu. 1 Press j ON SCREEN .
En 8 1 SETUP Editing the SCENE function (Scene menu) Scene menu ■ Registering SCENE function settings Save Registers the settings curr entl y applied to th is unit for each SCENE.
SETUP Editing the SCENE function (Scene menu) En 8 2 ■ Changing a scene name and icon Rename/Icon Select Changes the scene name and icon displayed on the front panel display or TV screen. 1 Use k Cursor B / C repeatedly to select “Rename/Icon Sele ct” and press k ENTER .
SETUP En 8 3 Sound effects can be adjusted from the Sound Program menu. Editing sound programs Adjust sound field elements (sound prog ram parameters) to achie ve sound effe cts suited to the ac oustics o f audio/ video sources or rooms if you are not satisfi ed with the results achiev ed with defa ult sound program settings.
En 8 4 SETUP Setting sound program parameters (Sound Progra m menu) CINEMA DSP parameters DSP Level Change the ef fect le vel (le vel of th e sound f ield effect to be added). Y ou can adjust the level of the sound f ield effect while checking the sound ef fect.
En 8 5 SETUP Setting sound program parameters (Sound Progra m menu) Liveness Surround Liveness Surround Back Liveness Liv eness. Surround and surround back li veness. Adjusts the reflectivity of the virt ual w alls in the hall b y changing the rate at which the early r eflecti ons decay .
SETUP Setting sound program parameters (Sound Progra m menu) En 8 6 Reverb Level Rev erberation le vel. Adjusts the v olume of the rev erberation sound. The lar ger the value, the stronger the reverberation becomes. Decode T ype Selects a surround decoder to be us ed with a sound program in the MO VIE category .
SETUP Setting sound program parameters (Sound Progra m menu) En 8 7 Front Presence R Le vel Adjusts the volume of the front presence R channel. J 1 Parameters usable in surround decoder Decode T y pe Selects a surround decoder . Dolby PLIIx Musi c and Dolby PLII Music onl y Panorama Adjusts the soundscape o f the front sound field.
SETUP En 88 V arious settings, such as speaker volume or HDMI functions, can be change d from the Setup menu. Operating the Setup menu 1 Press j ON SCREEN . 2 Press k Cursor B / C repeatedly to select “Setup” and press k ENTER . 3 Use k Cursor D / E to select a menu and press k ENTER .
En 8 9 SETUP Setting various fun ctions (Setup menu) Setup menu Manages settings for speakers Speaker setup items ■ A utomatic speaker se tup Au t o S e t u p Optimizes the speak er configurat ion automatically u sing YP A O ( ☞ p. 37 ). ■ Manual speaker setup Manual Setup The follo wing parameters ca n be specif ied manually .
SETUP Setting various fun ctions (Setup menu) En 90 Power Amp Assign In addition to the 7.1-channel sp eaker connection, v arious speaker configurations are possi ble using the presence speakers connection, bi-amp connection or multi-zone functi on ( ☞ p.
SETUP Setting various fun ctions (Setup menu) En 91 Surround Back Selects the size of the surround back speakers. Front Presence Specify connection of front presence speak ers.
SETUP Setting various fun ctions (Setup menu) En 92 Distance Adjusts the timing at which the speakers prod uce audio so that sounds from the speakers reach the listening position at the same time. Selecting adjustment units Use k Cursor B / C to select the unit for distance (meters or feet), and press k ENTER .
SETUP Setting various fun ctions (Setup menu) En 93 Te s t To n e T urns the test tone generator on or off. Setting the audio output function of this unit Sound setup items ■ Synchr onizing audio/video output Lipsync Adjusts the delay between audi o and video output (Lipsync function).
SETUP Setting various fun ctions (Setup menu) En 94 ■ A uto-adjusting Dolby Digital and DTS dynamic range Dynamic Range Selects the dynamic range adjus tment method for audio bitstream (Dolby Digital and DTS) signal playback. ■ Setting the maxim um v olume Max Volume Specify the maximum v olume lev el so that sound is not too loud.
SETUP Setting various fun ctions (Setup menu) En 95 Setting this unit’ s vi deo output function Video setup items ■ Analog-to-analog video con version Analog to Analog Conversion Enables or disables video con v ersion between analog video jacks.
SETUP Setting various fun ctions (Setup menu) En 96 Setting HDMI functions HDMI setup items ■ Receiver operation via TV (HDMI Control) HDMI Control Set the HDMI Control function to “On” to operate devices connected via HDMI. If the TV or other external components support HDMI Control (e.
SETUP Setting various fun ctions (Setup menu) En 97 ■ Selecting an input sour ce to assign audio input for the TV TV Audio Input Select the input source that rece ives audio signals from TV while the HDMI Control function is on.
En 98 SETUP Setting various fun ctions (Setup menu) Adjusting this unit’ s network parameters Network setup items ■ Setting the network parameter s (IP address, etc.
En 99 SETUP Setting various fun ctions (Setup menu) Setting this unit’ s multi-zone function Multi Zone setup items ■ Adjusting Zone2 v olume Zone2 Set Vol um e Selects whether or not volume leve l adjustment of Zone2 speak ers is enabled. Max Volume Specify the maximum v olume lev el in Zone2 so that sound is not too loud.
SETUP Setting various fun ctions (Setup menu) En 100 ■ Changing Zone2 scene name Zone Scene Rename Editing the name of the se lected sce ne in Zone2. 1 Use k Cursor B / C repeatedly to select “Zone Scene Rename” and press k ENTER . 2 Press k ENTER .
SETUP Setting various fun ctions (Setup menu) En 101 ■ Entering standby mode automatically when no operations are performed Auto Power Down If you do not o perate this unit or use the remote control for an extended period of time, it will automaticall y go into standby mode (Auto Po wer Down function).
En 102 SETUP Setting various fun ctions (Setup menu) ■ Specifying menu displa y Display Set Specify front panel display bright ness and TV screen wall paper . Front Panel Display Specify front panel display bright ness and message scroll pattern. Wall Paper Specify the wall paper displayed on the TV screen when no video signal is input.
SETUP Setting various fun ctions (Setup menu) En 103 T arget Source Specify the output lev el of electr onic signal transmitted each ti me input is switched.
SETUP En 104 A va riety of information for this unit can be displayed. Selecting information 1 Press j ON SCREEN . 2 Use k Cursor B / C to select “Information” and press k ENTER . 3 Use k Cursor D / E to select an Information menu and press k ENTER .
En 105 SETUP Confirming informa tion of this unit (Information menu) ■ Netw ork inform ation Displays informa tion on the netw ork status. Refer to “ Adjusting this unit’ s network parameters” ( ☞ p. 98 ) for details on setting the network status.
SETUP En 106 Y ou can operate an external component such as TV and D VD player with the remote control of this unit by setting the code for ex ternal component (remote control code).
SETUP Controll ing the remote co ntrol to opera te various functio ns En 107 Registering remote control codes for external comp onent operations The follo wing secti on describes how to re gister remote control code using an exampl e of the registration of the remote control codes of a Y a maha BD player connected to A V2 jack.
SETUP Controll ing the remote co ntrol to opera te various functio ns En 10 8 Resetting all remote control codes Resetting all remote control codes for external components to the initial factory settings. 1 Press o CODE SET using a pointed object such as the ti p of a ballpoint pen.
SETUP En 109 The Advanced Setup menu can be used for unit initialization and other useful extended functions. The Advanced Setup menu can be operated as follows. Displaying/Setting the Advanced Setup menu 1 Switch this u nit to the standb y mode. 2 Press MAIN ZONE A while pressing and ho lding STRAIGHT on the front panel.
SETUP Extended functiona lity tha t can be configur ed as needed (Advan ced Setup menu ) En 110 Remote sensor Acti vate or de activ ate the signal-recei ving capability of the remote control sensor on the front panel of this unit.
SETUP Extended functiona lity tha t can be configur ed as needed (Advan ced Setup menu ) En 111 Changing TV format Change the color encoding format of OSD to P A L (def ault) or NTSC, to match the format used by the TV connected via the HDMI OUT 1-2 or VIDEO (MONITOR OUT) jack.
En 112 SETUP Extended functiona lity tha t can be configur ed as needed (Advan ced Setup menu ) Firmware update Update the firmw are of this unit. For details on updating the firmware, refer to informat ion supplied with updates.
SETUP En 113 This unit supports the HDMI Control function, which allo ws you to operate external componen ts via HDMI. If de vices that support HDMI Control (e.
SETUP Using the HDMI Control function En 114 ■ Switching the input sour ce on this unit automatically when listening to TV audio When the HDMI Control ( ☞ p. 113 ) is operating properly , the input source of this unit is automatically changed to match operations carr ied out on the TV .
SETUP Using the HDMI Control function En 115 6 Make sure that “HDMI Contr ol” is “On” When “HDMI Control” is set to “Off, ” press k ENTER and k Cursor B / C to set to “On. ” 7 Press k Cursor B / C to select “Contr ol Select” and pres s k ENTER .
SETUP Using the HDMI Control function En 116 5 Make sure that “HDMI Contr ol” is “On. ” When “HDMI Control” is set to “Off, ” press k ENTER and k Cursor B / C to set to “On. ” 6 Press k Cursor B / C to select “Contr ol Select” and pres s k ENTER .
SETUP En 117 This unit allows you to configure a multi-zone audio system. The Zone2 feature allows you to set this unit to reprod uce separat e input sources in the main zone and the second zone (Zone2). Y ou can control this unit from the second zone using the supplied remote control.
SETUP Enjoying the contents in another r oom En 11 8 ■ Connecting zone video monitors Connect the video monitor(s) in Zone2 to M ONITOR OUT/ZONE OUT jacks. If you connect the multiple zone video monito rs to these jacks, the video monitors play back the select ed input source for the Zone2.
SETUP Enjoying the contents in another r oom En 119 Controlling Zone2 The remote control can be us ed to select and control Zone2 de vices. The availabl e operations are as follows: • Selecting the input sourc e of Zone2. • T uning into FM or AM when “TUNER” is selected as the input source of Zone2.
En 120 APPENDIX Refer to the table below when this unit does not function properly . If the problem you are experiencing is not listed belo w , or if th e instructions below do not help, turn of f this unit, disconne ct the power cable, and contact the nearest authorized Y amaha dealer or service center .
En 121 APPENDIX Troublesho oting No picture. The video sign al output from this unit is no t supported by a moni tor connected t o this unit vi a the HDMI OUT 1-2 jacks. Display s the Advanc ed Setup menu an d select “VID EO” in “I NITIALIZE” to reset the video p arameters.
En 122 APPENDIX Troublesho oting HDMI™ There is nois e interfer ence from digital o r radio frequency equipment. This unit is too close to othe r digital or ra dio frequency equipment. Mov e this unit further away from such equipment. — Noise/hum noise is hear d.
En 123 APPENDIX Troublesho oting T uner (FM/AM) FM AM Problem Cause Remedy See page FM stereo reception is noisy . Y ou are too far from the station transmitter , or the inpu t from the antenna is weak. Check the a ntenna connecti ons. 36 Switch to mona ural mode.
En 124 APPENDIX Troublesho oting USB and Network Problem Cause Remedy See page “No Device” is displa yed eve n when a USB device i s present. This unit recog nized the USB storage device as an illegal device. T urn this unit of f then on ag ain. — The music files an d director ies in the USB device cannot be viewed.
En 125 APPENDIX Troublesho oting iPod™/iPhone™ Access error This unit cannot ac cess your USB storage device or USB portabl e audio player. Try another USB stor age device or USB portable a udio player. — There is a p roblem with the signal path from yo ur USB storage device or USB portable audio player to th is unit.
En 126 APPENDIX Troublesho oting Bluetooth™ Remote control Display Cause Remed y See page Searching... The Y ama ha Bluetooth Wireless Audio Receiver and the Bl uetooth component ar e in the proces s of pairing . — The Y amaha Bl uetooth Wireless Audio Receiver and the Bl uetooth component ar e in the proces s of establishin g a connection .
APPENDIX En 127 Audio information Audio and video sync hronization (Lipsync) Lip sync, an abbrev iation for lip synchr onization, is a technical term that in volves both a problem and a capability of maintaining audio and video signals synchronized during post- pro duction and transmission.
APPENDIX Glossary En 12 8 DTS-HD Master A udio DTS-HD Master Audio is an advanced lossless audio technology developed for high-definition disc-based media including Blu-ray Disc.
APPENDIX Glossary En 129 Video information Component video signal W ith the component video signal system , the video signal is separated into the Y signal for luminance and the P B and P R signals for chrominance. Color can be reproduced more faithfully with this system because each of these signals is independent.
APPENDIX En 130 ■ HDMI signal compatibility Audio signals • If the input source component can decode t he bitstream audi o signals of au dio commentaries , you can play back the audio sources wi th the audio comm entaries mixed down by using the digital audi o input (optical or coaxial) con nections.
APPENDIX En 131 Manufactured under license f rom Dolby Laboratories. Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S. Patent #’ s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226, 616; 6,487,535; 7,212,872; 7,333 ,929; 7,392,195; 7,272,567 & other U.
APPENDIX En 132 ■ Input • Analog Audio RCA .... ............... .............. ................. ............... .............. ............... . 10 A V1-4, A UDIO1-4, PHONO, VID EO A U X MUL TI C H INPUT... ............... ................. .....
APPENDIX Specifications En 133 • Dynamic Headroom 8 Ω ...... ............... .............. ................. ............... .............. ......... 1.1 d B • Damping F actor FR ONT L/R , 1 kHz, 8 Ω .... .............. ................. ......
APPENDIX En 134 Numerics 2ch stereo playba ck .. ................ ................ ............... ................ ..... 49 5 channel speaker layout ...... ................................. .................. ..... 18 5.1-channel speaker layout..... .
APPENDIX Index En 135 Input menu ......... .................................................................. ........ 77 Input menu list ......... ............ ................................. .................. ..... 78 Internet Radio .............
APPENDIX Index En 136 Supplied acce ssories ................ ................ ............... ............. .......... 2 Surround Back Initial Delay, Sound Program menu ..... ......... ..... 84 Surround Back L Level, Sound Program menu ............. .
An important point after buying a device Yamaha RX-A1000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha RX-A1000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha RX-A1000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha RX-A1000 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha RX-A1000 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha RX-A1000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha RX-A1000.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha RX-A1000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha RX-A1000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
