Instruction/ maintenance manual of the product MV800 Yamaha
Go to page of 20
MIXER Owner’ s Manual Thank you for pur chasing the Y AMAHA MV800. The MV800 is an easy to operate mix er that offers an e xc ellent balance between line input devices for BGM or K araoke and micropho ne input.
MV800 — Owner’ s Manual WARNING: THIS APPARATUS MUST BE EARTHED IMPORTANT THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: GREEN-AND-YELLOW : EARTH BLUE : NEUTRAL B.
MV800 — Owner’ s Manual Important Read the following before operating the MV800 Important 1 W arnings • Do not place a container with liquid or small metal objects on t op of this unit. Liquid or metal objects inside this unit are a fire and electrical shock hazard.
MV800 — Owner’ s Manual 2 MV800 Features • The MV800 pro vides 8 channels w ith monaural input jacks, A/B stereo line input jacks and two sets of stereo outputs that are selectable from the front panel.
MV800 — Owner’ s Manual Front & Rear Panels 3 q ui y t r e w Channels 1-8 (Monaural) Response [dB] +5 +10 +15 – 15 – 10 – 5 0 Frequency [Hz] 10k 1k 100 20k 20 +20 – 20 Front & Rear Panels Front Panel Section q GAIN Control Adjusts the inpu t level of the sig nal entering the mix er to an optimum level.
MV800 — Owner’ s Manual 4 Front & Rear Panels q ST Input Select Switch Selects which of the two input signals, from ST Input jacks A or B , will be used. In the raised position ( ? ), ST Input jack A is selected while the lower ed position ( > ) selects ST Input jack B .
MV800 — Owner’ s Manual Front & Rear Panels 5 • P AGING LEVEL Control Controls the output leve l of the P A GING MIC/LINE input and adjusts the v olume. i P AGING INPUT DUCKER • P AGING TH Control Sets the level at which the mix er switches to its P A GING function.
MV800 — Owner’ s Manual 6 Front & Rear Panels e t q r y w u q Channel Inputs (1-8) • INPUT Jacks Both balanced XLR ty pe and E uro-block c onnectors are sup plied.
MV800 — Owner’ s Manual Front & Rear Panels 7 • ST ACK OUT This is an unbalanced phone type out put jac k with a nominal input/impedance of 0dB/10k Ω . It sends the Z ONE 1 and ZONE 2 bus signals that hav e passed through the compr essor circuit.
MV800 — Owner’ s Manual 8 About the Accessories About the Accessories Euro-block Connectors If you decide to use E uro-block c onnectors, please use the supplied c onnectors and attach as sho wn in the illustration below . q T urn the POWER switch OFF .
MV800 — Owner’ s Manual About the MV800’ s Functions 9 About the MV800’ s Functions ■ About the NOISE GA TE Function An unused microp hone often picks up un wanted background noise. One way to pr event the problem is t o turn the microphone off or set its channel volume on the MV800 to “0” when necessar y .
MV800 — Owner’ s Manual 10 Applications Applications Example) When Using T wo Zones In this example, the MV800 is used to control the sound in tw o rooms, a banquet room and a Karaok e room. Before making any connections, make sure that power switches on the MV800 and any connected devices are turned OFF .
MV800 — Owner’ s Manual Applications 11 ZONE 1 ZONE 2 PHONES REC OUT 1L, 1R REC OUT 2L, 2R INPUT ST INPUT B A INSERT OUT ZONE 1 OUTPUT ZONE 2 OUTPUT INSERT IN INSERT OUT INSERT IN INSERT OUT INSER.
MV800 — Owner’ s Manual 12 Applications <Setting: ZONE 1> ● Channel 1-4 Settings 1. M ake the follo wing se ttings. Channel V olume = < , Gate S witch = ON ( > ), ZONE Select Switch = only set “1” to ON ( > ), Z ONE 1’s Z ONE V olume = < , ST/MONO Select Switch = “ST” .
MV800 — Owner’ s Manual Frequency response (ZONE OUTPUT) 20Hz — 20kHz 0+1dB, -3dB @+4dB, 600 Ω (INPUT GAIN Control at minimum level) T otal harmonic distortion (ZONE OUTPUT) <0.
MV800 — Owner’ s Manual Input PA D GAIN Input Nominal Input level Connector type connectors Control impedance impedance Sensitivity *1 Nominal Max. before c lipping MIC MAX 50-600 Ω -72 dB (0.195mV) -60 dB (0.775mV) -40 dB (7.75mV) CH INPUT LINE 3k Ω mics & -46 dB (3.
MV800 — Owner’ s Manual Supplement 15 429 87.5 479 88 301 337 325 Units: mm Dimensions.
MV800 — Owner’ s Manual 16 Supplement +30dB +20dB +10dB 0dB –10dB –20dB –30dB –40dB –50dB –60dB PHONES[30mW@40ohms] PHONES LEVEL ZONE1 OUT ZONE2 OUT[+4dB] Max. Before Clip REC OUT[-10dBV] ZONE LEVEL PAGING LEVEL ST INPUT [-10dBV] CH IN LEVEL Max.
MV800 — Owner’ s Manual.
Y AMAHA CORPORA TION Pro Audio & Digital Musical Instrument Division P .O. Box 3, Hamamatsu, 430-8651, Japan V627640 R1 1 CP 20 NP Printed in T aiwan.
An important point after buying a device Yamaha MV800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha MV800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha MV800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha MV800 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha MV800 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha MV800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha MV800.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha MV800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha MV800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
