Instruction/ maintenance manual of the product HTIB 109 Yamaha
Go to page of 62
RX-V365 AV R e c e i v e r O WNER’S MANU AL U.
Caution-i En • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilatera l triangle, is in tended to alert yo u to the presence of uninsulated “da ngerous v oltage” wi thin the product’ s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Caution-ii En IMPORTANT SAFETY INSTRUCTIONS d) If the product does not oper ate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructi.
Caution-iii En 1 T o assure the finest performance, please read this manual carefully . Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry , clean place – away fro m direct sunlight, heat sources, vibration, dust, moisture, and/or cold.
1 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION Features .......... ............ ............ .......... ............ ............ 2 Supplied accessories . ................ ...........
2 En INTRODUCTION Built-in 5-ch annel power amplifier ◆ Minimum RMS outp ut power [U.S.A. and Canada models] (1 kHz, 0.9% THD, 8 Ω ) Front: 100 W/ch Center: 100 W Surround: 100 W/ch [Other models] (1 kHz, 0.
3 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION A ST ANDBY/ON T urns on this unit, or sets it to standby mode (s ee page 15) . B PHONES jack Connect to a pair of he adphones (s ee page 19 ).
4 En Functional overview a Decoder indicator Lights up w hen any of the deco ders of thi s unit fun ctions. b ENHANCER indicat or Lights up when the Compres sed Music Enha ncer mode is selected ( see page 25) . c VIRTU A L indicator Lights up w hen V irtual CIN EMA DSP is act ive (see page 26).
5 En Functional overview English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION a Infrared window Outputs in frared cont rol signal s (see page 8). b TV/A V PO WER T urns your TV or other components on or off (see page 38).
6 En Functional overview a DOCK terminal Connect to th e Y amaha iPod Universal Dock (su ch as YDS-11, sold separat ely) or Blueto oth Wireless Audio Rece iver (such as YB A-10, sold se parately) using its dedicated cabl e (see page 14).
7 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION The follo wing steps describe the easiest w ay to operate this unit. See the related pages for details on the operation and settings. In these steps, you need the follo wing items which are not included in the package of this unit.
8 En PREP ARA TION 1 T ake off the battery compartment cover . 2 Insert the four supplied batteries (AAA, R03, UM-4) according to the polarity markings (+ and –) on the insi de of the battery compartment. 3 Snap the battery comp artment cover back into place.
9 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION The speaker layout belo w shows th e speaker setting we recommend.
10 En Connections * Y ou can select the fr ont speaker set from Front speaker s (A) and Front speakers (B) b y pressing C SPEAKERS repeatedly . See page 18 for details. ■ Connect speaker cables to each speaker Cables are colored or shaped dif ferently , perhaps with a stripe, groov e or ridge.
11 En Connec tions English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION A udio jac ks and cable plugs A UDIO jacks For con ventional analog audio si gnals transmitted via le ft and right analog audio cables.
12 En Connections Note • If you t urn off the video monitor connected to the HDMI OUT jack via a DVI connection, the connection may fail. In thi s case, t he HDMI indicator flashes irregular ly . Connecting a TV monitor or pr ojector Make sure th at this unit and ot her components are unplug ged from the A C wall outlets.
13 En Connec tions English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION This unit has three types of audio jack s, two types of video jacks and HDMI jacks. Y ou can choose the con nection method depending on the com ponent to be conn ected.
14 En Connections Notes • B e sure to make the same type of video connections as th ose made for your TV if the video conversion is disabled. For example, if you connected your TV to the VIDEO MONITOR OUT jack of this uni t, conn ect other compone nts to the VIDEO jack s.
15 En Connec tions English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION Use the VIDEO A UX jacks on th e front panel to connect a game console or a video camera to this unit. T o reproduce the source signals input at th ese jacks, select “V -A UX” as the input source.
16 En The “BASIC SETUP” feature is a useful way to set up your system quickly and with minimal effort. Notes • Make sure t hat you disconnect your headphones from this unit. • If you w ish to configure this unit manuall y using more precise adjustments, use the detailed parameters in “SOUND MENU” (see page 32).
17 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION BASIC OPERA TION 1 Tu r n o n e x t e r n a l c o mponents (TV , DVD play er , etc.) connected to this unit. 2 Press C SPEAKERS repeatedly to select the front speaker s you want to use.
1 8 En Playback Use the following f eatures to select input jack or input source. ■ Selecting the front speaker set Press C SPEAKERS repeatedly change the active front speaker set that is connec ted to the FRONT A or FRONT B speaker terminals or turn off the front speakers.
19 En Playback English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION Use the following features to adjust the audio output or speaker lev el. ■ Muting the audio output Press e MUTE on the remote c ontrol to m ute the audio output.
20 En Playback y • “NIGHT:CINEMA” and “NIGHT :MUSIC” adjustments are stored independently . Notes • Y ou cannot u se the night listening modes in the following cases: – when the component connect ed to the MUL TI CH INPUT jacks is selected as the input source.
21 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION Just by pressing one SCENE button, you can recall your fa vorite input source and sound f ield program according to the SCENE templa te that has been assi gned to the SCENE butt on.
22 En Selecting the SCENE templates The following tables ind icate preset SCENE template descripti ons. Select the corresponding SCENE templates for the desired source. The illustrations of the SCENE butt on in the follo wing table ind icate that the SCE NE templates in those cells are assigned to the SCENE b uttons, respecti vely .
23 En Selecting the SCENE templates English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION ■ Video games Note • When an iPod is connected to .
24 En Selecting the SCENE templates Y ou can operate both this unit and the input source component by u sing the remote control. Y ou must set the appropriate remote control code for each input source in advan ce (see page 39). 1 Press the desired i SCENE butt on on the remote contr ol.
25 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION This unit is equipped with a variety of precise digital decoders that allow you to enjo y multi-channel playback from almost any stereo or multi-channel sound source.
26 En Sound field programs ■ Selecting decoders for 2-c hannel sources (surround decode mode) Signals input from 2-channel s ources can also be played back on multi-channels.
27 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION Y ou can use two tuning modes to tune into a desired FM/ AM station: ■ Frequen cy .
2 8 En FM/AM tuning y • Y ou can select the preset s tation group and the preset stat ion number where the first recei ved station will be stored by pressing E A/ B/C/D/E and then F PRESET/TUNING l / h .
29 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION Once you hav e stationed your iPod in a Y amaha iPod uni versal dock (such as the YD.
30 En Y ou can connect a Bluetooth W ireless Audi o Receiv er (such as YBA-10, sold sepa rately) to the DOCK terminal of this unit and enjoy the music contents stored in your Bluetooth component (such as a portable music player) without wiring between this unit and the Bluetooth com ponent.
31 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION ADV ANCED OPERA TION Y ou can use the follo wing parameters in the set me nu to adjust a variety of system settings and customize the way this unit operates.
32 En Set menu Use the remote control to acce ss and adjust each parameter . y • Y ou can change the set menu paramete rs while this unit i s reproducing sound. 1 Press h AMP and then press k MENU on the remote co ntrol. “B ASIC SETUP” appears on the front panel display .
33 En Set menu English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION LFE signals output Low-freq uency signals outpu t Notes *1 Outputs the low-frequency signals of the front channels and other speakers to “SML” or “NONE.
34 En Set menu ■ Te s t t o n e TEST Use this feat ure to make adjustments for “CEN TER GEQ” while listening to a te st tone. Use this feature to adjust the output lev el of the LFE (low- frequency ef fect) channel acco rding to the capacity of your subwoofer or headphones.
35 En Set menu English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION The follo wing is an example where “D VD” is renamed “My D VD. ” 1 Press one of the input selector buttons ( f ) or v MUL TI CH IN to select the input source y o u want to change the name of.
36 En Set menu Use this feature to designate the default audio input jack select setting for the input sources. Use this feature to set all th e parameters of the sound field programs to the initia l factory settings.
37 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION In addition to controlling this unit, the remote control can also operate other audiovisual components made b y Y amaha and other manufacturers.
3 8 En Remote control features ■ Controlling oth er components Press one of the input selector buttons ( f ) or A to E buttons to co ntrol other components. Y ou must set the appropriate remote control code for each input source in advan ce (see page 39).
39 En Remote control features English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION Y ou can control other co mponents by setting the appropriate remote cont rol codes.
40 En This unit has additional menus that are displayed on the front panel display . The advanced setup menu of fers additional operations to adjust and customize the way this unit opera tes. Change the initi al settings (indicated b y (*) in this following parameter) to reflect the needs of your listening en vironment.
41 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION ADDITIONAL INFORMA TION Refer to the table belo w when this unit does not function prop erly .
42 En Troubleshooting Sound is hea rd fr om the speak er on one side only . Incorrect ca ble conne ctions. Co nnect the c ables prope rly . If the prob lem persists , the cables ma y be defective. 11-14 Incorrect se ttings in “SP LEVEL. ” Adjust the “SP LEVEL” settings.
43 En Troubleshooting English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION ■ Tu n e r The sound field parameters and so me other settings of this unit cannot be chan ged . “MEM.GUARD” in “OPTION MENU” is set to “ON.
44 En Troubleshooting ■ iP od Note • In case of a transm ission error without a status message appearing on the front panel display, ch eck the connection to your iPo d (see page 14). ■ Blueto oth AM The desired st ation cannot be tune d into with the au tomatic tuning me thod.
45 En Troubleshooting English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION ■ Remote control ■ Resetting the system Use this feature to reset all th e parameters of this u nit to th e initial factory sett ings.
46 En ■ Audi o information Dolb y Digital Dolby Digital i s a digita l surrou nd sound sys tem that gives you completel y independe nt multi- channel audi o. With 3 front chann els (front L/R and center) , and 2 surro und stereo ch annels, Dol by Digital provides 5 fu ll-range a udio channel s.
47 En English INTRODUCTION ADDITIONAL INFORMA TION APPENDIX PREP ARA T ION BAS I C OPERA TION AD V ANCED OPERA TION A UDIO SECTION • Minimum RMS Outpu t Power for Front, Center, Surround [U.S.A. and Canada models] 1 kHz, 0.9% TH D, 8 Ω ............
4 8 En ■ Numerics 1 SOUND MENU ........................... ......... 3 1, 32 2 INPUT MENU .................... .................. 31, 34 2ch Stereo ...................................................... 25 3 OPTION MENU . ...........................
Index 49 En English ADDITIONAL INFORMA TION ■ O Option menu .................... ............................... 31 ■ P Pairing, Bluetooth co ntrol ................ ..............30 PANORAMA .......................... .......................26 Panorama .
i List of remote contr ol codes Blu-ray Pla yer Samsung 2137 CD Pla yer Y amaha 5000, 5013 CD Recor der Y amaha 5001 DV D Acoustic So lutions 2078 Aiwa 2055, 2100 Akai 2096 Akura 2076 Alba 2078, 2086 .
ii APPENDIX Akai 0059, 0065, 0127, 0129, 0130, 0200, 0204, 0208, 0209, 0213, 0217, 0218, 0255 Akiba 0209, 0218 Akura 0206, 0 209, 0218 Alaron 0200 Alba 0200, 0207, 0208, 0209, 0217, 0218 ALBIRAL 0212 .
iii Lenco 0208 Lenoir 0207, 0208 Lesa 0214 Leyco 0206, 0213 , 0217 LG 0016, 0038, 0039, 0127, 0128, 0157, 0158, 0163, 0164, 0166, 0188, 0189, 0200, 0201, 0207, 0208, 0210, 0213, 0214, 0215, 0217 Liese.
iv APPENDIX T andy 0127, 0207, 0209, 0211, 0218 T ashiko 0200, 0207, 0210 T atung 0127, 0204, 0207, 0213, 0217, 0237 TCM 0206, 0208 T eac 0127 T ec 0207, 0208, 0214, 0215 T echwood 0060, 0061 T eknika.
RX-V365 List of remote control codes The following remote control codes are av ai lable in addition to “List of remote c ontrol codes” at the end of the owner’ s manual.
.
© 2009 Ya maha Corporation All r ights reserved. Printed in China WQ95850.
The letters in circles and the numbers in s quares correspond to those in the Owner's Manual. Les lettres dans le s cercles et les numéros da ns les carrés correspondent à ceux du mode d’emploi.
■ Remote contr ol/Boîtier de télécommande PO WER CD MD/CD-R TUNER DVD V -AUX/DOCK BAND LEVEL TITLE MENU RETURN ENTER DISPLA Y V OLUME AMP DTV/CBL DVR TV CH TV V OL TV INPUT TV MUTE PO WER POWER MUTE ST ANDBY TV AB AV C DE SCENE P R E S E T / C H A / B / C / D / E P R E S E T / C H A / B / C / D / E 12 3 4 REC PROG ENHANCER SUR.
An important point after buying a device Yamaha HTIB 109 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha HTIB 109 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha HTIB 109 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha HTIB 109 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha HTIB 109 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha HTIB 109, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha HTIB 109.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha HTIB 109. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha HTIB 109 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
