Instruction/ maintenance manual of the product DV-C6770 Yamaha
Go to page of 40
0 DVD AUDIO / VIDEO SA-CD CHANGER LECTEUR DE DVD AUDIO / VIDEO SA-CD CHANGEUR DV-C6770 OWNER’S MANUAL MODE D’EMPLOI U.
i IMPORTANT SAFETY INSTRUCTIONS • Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ii We Want You Listening For A Lifetime YAMAHA and the Electronic Industries Association's Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
iii CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install this sound system in a well ventilated, cool, dry, clean place — away from direct sunlight, heat sources, vibration, dust, moisture, or cold.
1 English Contents Introduction Region Codes .......................................................................... 2 Supplied accessories............................................................... 2 Notes about discs .........................
2 Introduction Thank you for purchasing this unit. This Owner’s Manual explains the basic operation of this unit. DVD discs must be labeled for ALL regions, Region 1 (U.S.A model) or Region 4 (Australia model) in order to play on this Player. You cannot play Discs that are labeled for other regions.
3 English Functional Overview * Press button for about two seconds. Front Panel STANDBY/ON – turns on this unit or sets it to the standby mode Disc tray – load up to 5 discs on the disc tray / OPE.
4 Functional Overview Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
5 English Functional Overview * Press and hold button for about two seconds. Remote Control B / | – turn this unit ON or go to standby-on mode 0-9 numeric keypad – select numbered items in a menu .
6 Preparation Never make or change connections with the power switched on. • Depending on the equipment you wish to connect, there are various ways you could connect this unit. Possible connections are shown in the following drawings. • Please refer to the manuals of other equipment as necessary to make the best connections.
7 English Preparation MIXED 2CH jacks Use audio/video cable supplied with this player to connect the L (left) and R (right) jacks to corresponding input jacks of your audio equipment such as Stereo amplifier. You can connect a subwoofer to the SUBWOOFER jack.
8 Getting Started 1 Open the battery compartment. 2 Insert two batteries type R06 or AA, following the indications (+ –) inside the compartment. 3 Close the cover. Using the remote control Handling the remote control • Do not spill water or other liquids on the remote control.
9 English Getting Started 4 Press 34 to highlight one of the options below: PAL Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format. NTSC Select this if the connected TV is NTSC system.
10 Getting Started Setting the Audio, Subtitle and Disc menu language 1 Press STOP 9 twice, then press SETUP . 2 Press 2 repeatedly to select {PREFERENCE PAGE}.
11 English Getting Started {FRONT SPEAKER, CENTER SPEAKER, SURROUND SP} OFF (only for CENTER and SURROUND) When no speaker is connected. LARGE When connected speakers can produce low frequency signals below 120 Hz. SMALL When connected speakers cannot produce low frequency signals below 120 Hz.
12 Disc Operations IMPORTANT! – If the inhibit icon ( or X) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. – Depending on the DVD or VIDEO CD, some operations may be different or restricted.
13 English Disc Operations Repeat Repeat chapter/title/disc (DVD-V) Each time you press REPEAT , the front display changes as follows; CHAPTER*: repeat the current chapter TITLE: repeat the current ti.
14 Disc Operations Shuffle (not for DVD/VCD/ SVCD) With the Shuffle function, you can play tracks in random order. 1 During playback, press SHUFFLE repeatedly to select SHUFFLE DISC, SHUFFLE ALL DISC, or SHUFFLE OFF. ➜ The selected mode appears on the display for several seconds.
15 English Disc Operations On-Screen Display (OSD) OSD menu shows the disc playback information (for example, title or chapter number, elapsed playing time, audio/ subtitle language), a number of operations can be done without interrupting disc playback.
16 Disc Operations Playing a Title 1 Press MENU . ➜ The disc title menu appears on the TV screen. 2 Use 1 234 or numeric keypad (0-9) to select a play option. 3 Press ENTER/OK to confirm. Camera Angle • Press ANGLE repeatedly to select different desired angle.
17 English Disc Operations 4 Use 1 234 to select a track or use numeric keypad (0-9) to input the selected track number next to {SELECT}. 5 Press S / T to open the previous or next page. 6 Press ENTER/OK to confirm. To quit preview function • Use 1 234 to highlight {EXIT} and press ENTER/OK to confirm.
18 Disc Operations The SA-CD standard is based on Direct Stream Digital (DSD) technology. This new direct-stream digital format comprises a 1-bit system that has a digital sampling frequency that is 64 times higher than that of conventional audio CD. There are three types of SA-CD discs: single-layer, dual-layer and hybrid discs.
19 English Disc Operations Playing a disc 1 Load a disc. ➜ Playback starts automatically. ➜ The TV screen will display the number of tracks for selection and current playing status. 2 Playback will stop at the end of the disc. 3 To stop playback, press STOP 9 .
20 Disc Operations 1 Load a Picture disc (Kodak Picture CD, JPEG). ➜ For Kodak disc, the slide show will begin. ➜ For JPEG disc, the picture menu appears on the TV screen. 2 Press PLAY B to start the slide-show playback. Preview Function (JPEG) This function shows the content of the current folder or the whole disc.
21 English Setup Menu The setup is carried out via the TV, enabling you to customize the DVD Player to suit your particular requirements. 1 Press SETUP . 2 Press 1 2 to select ‘General Setup’ icon. 3 Press ENTER/OK to confirm. Selecting DVD-Audio/Video mode 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight {DVD-AUDIO}, then press 2 .
22 Setup Menu To input your favorite tracks/chapter 3 Use the numeric keypad (0-9) to enter a valid track/chapter number. 4 Use 1 234 to move the cursor to the next position.
23 English Setup Menu OSD Language This menu contains various language options for display language on the screen. For details, see page 9. Screen Saver This function is used to turn the screen saver on or off. 1 In ‘GENERAL SETUP PAGE’, press 34 to highlight {SCREEN SAVER}, then press 2 .
24 Setup Menu 1 Press SETUP . 2 Press 1 2 to select ‘Audio Setup’ icon. 3 Press ENTER/OK to confirm. Setting the analog output Set Analog Output to match your DVD Player’s playback capability. 1 In ‘AUDIO SETUP PAGE’, press 34 to highlight {ANALOG OUTPUT}, then press 2 .
25 English Setup Menu 96kHz Playback a disc recorded at the sampling rate of 96kHz. If the 96kHz disc is copy protected, the digital output will be muted to comply with the standards. Speaker Setup This menu contains setup options for your audio output which makes the speaker setup system reproduce high quality surround sound.
26 Setup Menu Setting the TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.
27 English Setup Menu Picture Setting This DVD Player provides three predefined sets of picture color settings and one personal setting which you can define yourself. 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight {PICTURE SETTING}, then press 2 .
28 Setup Menu 1 In ‘VIDEO SETUP PAGE’, press 34 to highlight {CLOSED CAPTION}, then press 2 . ON To enable Closed Caption function. OFF To disable Closed Caption function. 2 Press 34 to select a setting, then press ENTER/OK to confirm your selection.
29 English Setup Menu PBC (Playback Control) You can set the PBC to ON or OFF. This feature is available only on Video CD 2.0 with playback control (PBC) feature. For details, see page 16. MP3/JPEG Menu MP3/JPEG Navigator can be set only if the disc is recorded with menu.
30 Language Code These pages can be used to select other languages.This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”. Abkhazian 6566 German 6869 Afar 6565 Gikuyu; Kiku.
31 English Language Code These pages can be used to select other languages.This does not affect the options in “AUDIO”, “SUBTITLE” or “DISC MENU”.
32 Troubleshooting Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cord, and contact the nearest authorized YAMAHA dealer or service center.
33 English Troubleshooting The player does not respond to the Remote Control – Aim the Remote Control directly at the sensor on the front of the player. – Reduce the distance to the player. – Replace the batteries in the Remote Control. – Re-insert the batteries with their polarities (+/– signs) as indicated.
34 Glossary Analog: Sound that has not been turned into num- bers. Analog sound varies, while digital sound has spe- cific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displa yed image.
35 English Specifications PLAYBACK SYSTEM DVD-Video DVD-Audio SA-CD multichannel and SA-CD stereo Video CD & SVCD CD PICTURE CD CD-R, CD-RW DVD+R, DVD+RW DVD-R, DVD-RW VIDEO PERFORMANCE Video (CVBS) Output 1 Vpp into 75 ohm S-Video output Y: 1 Vpp into 75 ohm C: 0.
IP © 2004 All rights reserved. YAMAHA ELECTRONICS CORPORATION, US A 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1 S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR.
An important point after buying a device Yamaha DV-C6770 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha DV-C6770 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha DV-C6770 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha DV-C6770 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha DV-C6770 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha DV-C6770, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha DV-C6770.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha DV-C6770. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha DV-C6770 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
