Instruction/ maintenance manual of the product Digital Sound Projector YSP-3050 Yamaha
Go to page of 118
YSP-3050 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGE THORPE AVE., BUENA PARK, CALIF. 90 620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCA RBOROUGH, ONTARIO M1S 3 R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 2 5462 RELLINGEN BEI HAMB URG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.
IMPORTANT SAFETY INSTRUCTIONS i En ■ Explanation of Graphical Symbols The lightning flash w ith arrowhead symbol, within an equilateral tr iangle, is intended to alert you to the presence of uninsul.
IMPORTANT SAFETY INSTRUCTIONS ii En FCC INFORMATION (fo r US customers) 1. IMPOR T ANT NOTICE: DO NO T MODIFY THIS UNIT! This prod uct, when ins talled as indicated in the inst ructions contained in this ma nual, meets FCC require ments.
CAUTION: READ THIS BEFORE OPERATING THIS UNIT. iii En 1 T o a ssure the finest perfo rmance, plea se read this man ual carefull y . Keep it in a safe place fo r future re ference.
PREP ARA TION INTRODUCTION BA S I C OPERA TION AD V ANC ED OPERA TION ADDITIONAL INFORMA TION SETUP English 1 En Overview ......... ............ ......... ............ .......... ............ .. 2 Featur es ..... ......... ............ ............. .
Overvi ew 2 En It is generally accepted that in order to fully enjoy the benef its of su rround sound at home, you must endure the agony of wiring and installing a great number of spea kers in the hop e that your listening room will gi ve you the same kind of surround sound experience as your local mo vie theater .
Features 3 En INTRODUCTION English Digital Sound Projector™ The Digital Sound Projector te chnology allows one slim unit to control and steer multiple channels of sound to generate multi-channel surr ound sound, thus eliminates the need for sate llite loudsp eakers an d cabling normally associated with con venti onal surround sound systems.
Features 4 En The “ ” logo and “IntelliB eam” are trademarks of Y amaha Corporatio n. The “ ” logo and “Cinema DSP” are registered trademarks of Y amaha Corporation. Manufactured under licen se from Dolby Labo ratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laborator ies.
Using this manual 5 En INTRODUCTION English • This manual describes how to connect and opera te this unit. F or details regarding the operation of external components, refer to the supplied owner’ s manual for each component. • Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.
Supplied accessories 6 En Check that you hav e received all of the follo wing parts. Supplied accessories STEREO MY SUR. MY BEAM PRESET/TUNE MEMORY SEARCH SLEEP INPUTMODE ENHANCER MENU RETURN DISPLA Y TV VOL VOLUME MUTE CH LEVEL TEST TV INPUT TV MUTE ENTER SUR.
Controls and functions 7 En INTRODUCTION English 1 A UX 3 input jac k Connect your portable audio player (see page 22). 2 INTELLIBEAM MIC jac k Connect the supplied IntelliBeam micr ophone for A UTO SETUP (see page 30). 3 Remote control sensor Receiv es infrared signals from the remote control.
Controls and functions 8 En 1 HDMI indicator Lights up when the signal of the selected input source is input at the HDMI IN jack(s). 2 TUNER indicators FM: Light up when this unit is recei ving an FM broadcast (see pages 43 to 45). XM: MEMOR Y flashes during the XM preset operation (see page 51).
Controls and functions 9 En INTRODUCTION English 1 ANTENNA jack Connect the FM antenna (see page 23). 2 DOCK terminal Connect the Y amaha iPod univ ersal dock (such as YDS- 10, sold separate ly) (see page 53). 3 A UX 1 A UDIO INPUT jacks Connect an exter nal component via an analog connection (see page 20).
Controls and functions 10 En This section describes the func tions of the remote control used to control this unit. Some butt ons marked with an asterisk ( * ) share the common functions between the YSP and TV/A V operation modes ( S ).
Controls and functions 11 En INTRODUCTION English F D VD player/VCR control b uttons Control your D VD player or VCR (see pages 95 and 97). G My Beam microphone Collects the t est tones from this unit when using the My Beam auto-adjust function (see pag e 63).
Controls and functions 12 En This section describes the func tions of the remote control used to control FM, XM Satellite Radio , or iPod when the TV/A V mode is selected with the operation mode selector ( 7 ). 1 PRESET/TUNE FM: Switche s between the pres et search mode and the frequency search mode (see pages 43 to 46).
Installat ion 13 En PREP ARA TION English This section describe s a suitable installation location to install this unit using a metal wal l bracket, a rac k or a stand. Depending on your installa tion en vironment, connections with external components can be done before installing this unit.
14 En Installat ion ■ Instal lation exampl es Example 1 Install this unit as close to the ex act center of the wall as possible. Example 2 Install this unit so th at the sound beams can be reflec ted off the walls. Example 3 Install this unit as close to the e xact front of your normal listening position as possible.
15 En Installat ion PREP ARA TION English ■ Using a metal wa ll bracket Y ou can use the optional metal wall brac ket to mount this unit on the wall in your listening room. y Refer to the instructions supp lied with the me tal bracket for details on how to attach the metal bracket to the wall or how to attach this unit to the metal bra cket.
Connec tions 16 En This unit is equipped with the follo wing type s of audio/video input/ output jacks/terminal: For audio inp ut • 2 optical digi tal input jacks • 2 coaxial digital input jacks .
17 En Connections PREP ARA TION English ■ Cables used f or connections HDMI cable A udio pin cab le (supplied) Optical cable (supp lied) Digital audio p in cable (suppl ied) 3.
18 En Connec tions This unit is equipped with 2 HDMI input jacks and 1 HDM I output jack. If your TV and other components hav e HDMI jacks, use HDMI cables for simpler and easier c onnections, and you can skip the conne ction procedures from page 19 to 21.
19 En Connections PREP ARA TION English For audio connection, connect the coax ial digital output jack on your D V D player/recorder to the D VD CO AXIAL DIGIT AL INPUT jack on this unit.
20 En Connec tions If your component supports optic al digital connections, conne ct the optical digital out put jack on your component (e.g., D VD player/recorder) to the A UX 1 OPTICAL DIGI T AL INPUT jack on this unit.
21 En Connections PREP ARA TION English For audio connection, connect the anal og audio output jacks on your TV to th e TV/STB A UDIO IN PUT jacks on this unit. If your TV has an optical digital o utput jack, connect the optical digital output jack on your TV to the TV/STB OPTICAL DIGIT AL INPUT jack on this unit.
22 En Connec tions Connect the analog audio outpu t jack on your portable audio player to the A UX 3 input jack on the front panel of this unit. 3.5 mm stereo mini plug cable Connect the monaural input jack on your subwoofer to th e SUBWOOFER OUT jack on this unit.
23 En Connections PREP ARA TION English Connect the supplied FM antenna to the FM ANTENNA jack on this unit. The IR IN jack does not support n ormal external component connection. This is a cont rol expansion terminal for commercial use onl y . Once all other connecti ons are complete, plug the AC po wer supply cable into the AC w all outlet.
GETTING ST ARTED 24 En 1 Press and hold the mark on the battery co ver and th en open the co ver . 2 Insert the two supplied batteries (AA, R6, UM-3) into the battery compartment. Make sure you insert the batteries according to the polarity markings (+/–).
Getting started 25 En SETUP English 1 Press ST ANDBY/ON to turn on the power of this unit. The v olume le vel ap pears in the front panel display , and the current input s ource and beam mode are displayed. 2 Press ST ANDBY/ON again to set this unit to the standby mode.
USING SET MENU 26 En This section describes how to display the OSD (on -screen display) of this unit on your TV screen and to set the parameters for your listening room. Once this is comple te, you can enjoy real surround sou nd while watching TV in the comfort of your o wn home.
Using SET MENU 27 En SETUP English The follo wing diagram illustrates the overall flo w of the setup procedure. The flow chart of SET MENU Run A UTO SET UP (IntelliBeam).
CHANGING OSD LANGUAGE 28 En This feature allows you to select the language of your choice that ap pears in SET MENU of this unit. 1 Set the operation mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV . y • The control buttons used f or SET MENU are displayed at the bottom of the screen.
AUTO SETUP (INTELLIBEAM) 29 En SETUP English This unit creates a sound f ield by reflecting sound beams on the w alls of your listening room and by br oadening the cohesion of all the channels. Just as you would arrange the speaker p osition of ot her audio systems, you need to set the beam angle to enjoy the best possib le sound from this unit.
AUTO SETUP (IntelliBe am) 30 En The supplied IntelliBeam microphone collec ts and analyzes the sound that this unit produces in your actual listening en vironment.
AUTO SETUP (I ntelliBeam) 31 En SETUP English ■ Assembling the supplie d car dboard micr ophone sta nd Y ou will find th ree separate pa rts (one circular part and two longitudinal parts) of the cardboard microphone stand originally put together . 1 Disassemble the three pa r ts of the c ar dboard microphone stand originally put togethe r .
AUTO SETUP (IntelliBe am) 32 En • Make sure that yo ur listening room is as qu iet as possible while this unit is performing the A UTO SETUP procedure. • T o achieve the best results possible, ev acuate yourself from your listening room until the A UTO SETUP procedure is completed so that you may not obstruct the path of sound beams.
AUTO SETUP (I ntelliBeam) 33 En SETUP English 5 Press / to select BEAM+SOUND OPTIMZ, BEAM OPTIMZ onl y, or SOUND OPTIMZ only and then press ENTER. The follo wing screen appears on your TV .
AUTO SETUP (IntelliBe am) 34 En 8 Check that the f o llowing screen is displa yed on y our TV . The results of the A UTO SETUP proced ure are displayed on your TV . y • If “ENVIRONMENT CHECK [F AILED]” is displayed, we recommend runnin g the A UTO SETUP procedure again.
AUTO SETUP (I ntelliBeam) 35 En SETUP English ■ Error messa g es for A UT O SETUP Before the A UTO SETUP pr ocedure star ts While the A UTO SETUP pr ocedure is in pr ogress If one of the errors listed belo w exce pt E-1 is displayed, press RETURN.
USING THE SYSTEM MEMORY 36 En Y ou ca n sav e the current settings adjusted in SET MENU in the syste m memory of this unit. It i s handy to sa ve certain settings accord ing to the v arying conditions of your listening en vir onment.
Using the system memory 37 En SETUP English 5 Press / to select MEMOR Y1, MEMOR Y2, or MEMOR Y3 and press ENTER. The follo wing screen appears on your TV . 6 Press ENTER again. The ne w parameters are sav ed as MEMOR Y1, MEMOR Y2, or MEMOR Y3. Once th e parameters are sav ed, the display returns to the SET MENU screen.
Using the system memory 38 En 4 Press / to select LO AD and press ENTER. The following screen ap pears on your TV . 5 Press / to select MEMOR Y1, MEMOR Y2, or MEMOR Y3 and press ENTER. The following screen ap pears on your TV . 6 Press ENTER again. The new parameters sa ved as MEMOR Y1, MEMOR Y2, or MEMOR Y3 are loaded.
PLAYBACK 39 En BA S I C OPERA TION English Y ou can play back sound fro m the components connected to this unit simply by pressing INPUT on the front panel repeatedly or pressing one of the input selector buttons (TV/STB, D VD, A UX1, A UX2, A UX3, XM, or FM) on the remote control.
40 En Playback Press FM/XM to listening to FM (see “FM tuning” on page 42) or XM Satellite Radio (see “XM™ Satellite Radio tuning” on page 47). Press A UX1 (or A UX2) to play back a component connected to the A UX 1 (or A UX 2) jack on the rear panel of this un it.
41 En Playback BA S I C OPERA TION English Press V OLUME +/– to increa se or decrease the v olume level. The numeric v alue of the v olume lev el appears in the front panel display .
FM TUNING 42 En There are two tuning methods: automatic an d manual. Automatic tuning is effecti ve when the ra dio signal is strong and there is no interference.
43 En FM tuning BA S I C OPERA TION English Automatic tuning is effect i ve when the radio station signals are strong and there is no interference. 1 Set the operation mode selector to TV/A V. 2 Press FM/XM repeatedly to select FM as the input source.
44 En FM tuning 3 Press SEARCH repeatedly until the A UT O indicator disappears fr om the front panel displa y . If a colon (:) appears in the front panel display , tuning is not a vailable. Pre ss PRESET/TUNE to turn the colon (:) off . 4 Press ENTR Y ( / ) to tune into the desired station manually .
45 En FM tuning BA S I C OPERA TION English Y ou can also store up to 40 stations (A1 to E8: 5 preset station groups with 8 pres et station numbers each) manually . 1 Set the operation mode selector to TV/A V. 2 T une into the desired FM station. See page 43 for tuning instructions.
46 En FM tuning Y ou can tune into the preset stations simply b y selecting the preset station groups and n umbers. 1 Set the operation mode selector to TV/A V. 2 Press FM/XM repeatedly to select FM as the input source . “FM” appears in the front panel display .
XM™ SATELLITE RADIO TUNING 47 En BA S I C OPERA TION English ■ About XM Satellite Radio XM Satellite Radio of fers an extraordin ary v a riety of commercial-fre e music, plus the best in sports, news, talk, and entertainment. XM is br oadcast in superior digital audio from co ast to coast.
48 En XM™ Satellite Radio tuning Once you ha ve installed XM Mini-T uner Home Dock, inserted XM Mini-T uner, conne cted Home Dock to your XM READ Y home audio system, and installed the antenna, you are ready to subscribe and begin recei ving XM programming.
49 En XM™ Satellite Radio tuning BA S I C OPERA TION English 3 Search f or a desir ed channel by using one o f the four XM Satellite Radio sear ch modes: • T o select a channel from all channels, see “ All Channel Search mode” on this page. • T o select a channel b y channel category , see “Category Search mode” on th is page.
50 En XM™ Satellite Radio tuning ■ Preset Search mode Prior to selecting a preset channe l in the Preset Search mode, you must preset the XM ch annels. For details, see “Presetting the XM™ Satellite Radio channels” on page 51. 1 Press SEARCH repeatedly to select “PRESET SEARCH”.
51 En XM™ Satellite Radio tuning BA S I C OPERA TION English Y ou can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 5 preset channel groups with 8 preset channel numbers each).
52 En XM™ Satellite Radio tuning Y ou can display the XM Sa tellite Radio inform ation (channel number/cha nnel name, channel category , and artist name/song or program title) for the currently selected channel in the front panel display or in the OSD.
USING IPOD™ 53 En BA S I C OPERA TION English This unit has the DOCK terminal on the rear panel that allo ws you to connect the Y amaha iPod univ ersal dock (such as YDS-10, sold separately). St ation your iPod in the Y amaha iPod uni versal doc k, and use the supplied remote control to operate your iPod.
54 En Using iPod™ y • For a complete list of status me ssages that appear in the front panel display an d in the OSD, see the “iPod” section in “T roubleshooting” on page 100.
55 En Using iPod™ BA S I C OPERA TION English 4 Press / a nd / to navigate through the iP od menu, and press ENTER to star t pla ybac k of the selecte d song.
ENJOYING SURROUND SOUND 56 En Y ou can enjoy multi-channel surro und sound by changing the be am mode using the beam m ode buttons on the remote control.
57 En Enjoying surround sound BA S I C OPERA TION English Outputs normal sound from the front left and right channels and sound beams from the center and surround left and right channels.
58 En Enjoying surround sound ■ Decoder indi cator s Depending on the input source and the selected surround mode, the decoder indicators in the front panel display light up as follo ws: y • Y ou can select an input mode (A UTO, DTS, or ANALOG) by pressing INPUTMODE repeated ly (see page 90).
59 En Enjoying surround sound BA S I C OPERA TION English This unit can decode 2-cha nnel sources for 5.1-channel playback so that you can enjoy a v ariety of surround sound ef fects by switching the surround mode.
60 En Enjoying surround sound Y ou can enjoy analog audio signals output from your TV in real surround sound. y Before perfo rming the step s below , set t he volume of this unit to 30. If necessary , adjust the volume lev el in step 5 below . 1 Select the TV channel yo u want to watch.
61 En Enjoying surround sound BA S I C OPERA TION English Y ou can configure the parame ters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound ef fect. 1 Repeat st eps 1 and 2 in “En jo ying 2-c hannel sources in surround sound ” on page 59 and select PL II Musi c or Neo:6 Music.
ENJOYING STEREO SOUND 62 En Y ou can enjoy 2-channel and 5-channel stereo playback as the beam modes b y pressing STEREO on the remote control. • When you play back Dolby Dig ital audio signals in the 2-chan nel or 5-channel stereo playb ack, the dynamic range becomes compressed.
PLAYING BACK SOUND CLEARLY (MY BEAM) 63 En BA S I C OPERA TION English Y ou can improve listenability in a noisy en vironment by changing the beam mode to My Beam, which outputs sound beams directly tow ard the liste ning position in a single channel.
64 En Playing back sound clearly (My Beam) Y ou can adjust the beam a ngle manually while playing back an input source . This function is also ideal if the listening position is out of th e operation guarantee range of the auto-adjust function. 1 Set the operation mode selector to YSP.
USING SOUND FIELD PROGRAMS 65 En BA S I C OPERA TION English This unit is equipped with a variety of precise digital de coders that allo w you to enjoy multi-channel playback from stereo or multi-channel sources.
66 En Using sound field prog rams Y ou can select from three dif ferent CINEMA DSP programs (MUSIC, MO VIE, and SPOR TS) depending on the type of source you want to enjoy . The CINEMA DSP indicator lights up in the front panel display when one of the CINEMA DSP programs is selected.
67 En Using sound field pro grams BA S I C OPERA TION English ■ T urnin g off CINEMA DSP pr ograms T urn off the CINEMA DSP programs if you want to enjo y the original sound without the CINEMA DSP program effect. 1 Set the operat ion mode selector to YSP.
USING THE MUSIC ENHANCER 68 En Y ou can use the Music Enhancer of this unit to improv e the sound nearest to the original depth and width of compression artifac ts such as the MP3 format. 1 Set the operation mode selector to YSP. 2 Press ENHANCER to select the Music Enhancer .
USING THE VOLUME MODE (NIGHT LISTEN ING ENHANCER/TV VOLUME EQUAL MODE) 69 En BA S I C OPERA TION English The night listening enhancers are designed to impro ve listenabi lity at lower v olumes or at ni ght.
USING T HE SLEEP TIMER 70 En Use this feature to automatic ally set this unit to the standby mode after a specif ied period of time. The sleep time r is useful if you are going to sleep after a certain amount of time while th is unit is still playing back a source.
71 En Using the sleep timer BA S I C OPERA TION English ■ Canceling th e sleep timer 1 Set the operat ion mode selector to YSP. 2 Press SLEEP repeatedly until “SLEEP OFF” appears in the fr ont pane l display . 3 W ait for a fe w seconds without operating this unit to confirm the setti ng f or the sleep timer .
DISPLAYING THE INPU T SOURCE INFORMATION 72 En Y ou can display the format and samp ling frequenc y of the current input signal in the front panel display .
USING THE HDMI CONTROL FEATURE 73 En BA S I C OPERA TION English Y ou can operate the following functions using the remote control supplied wi th your TV if this unit and an HDMI control-compatible TV (e xcept so me models) are connected via HDMI.
MANUAL SETUP 74 En T o achie ve the best quality surround sound, you can use M ANU AL SETUP to fine-tune the listening en vironment parameters, as well as to ma k e advanced settings for sound sig nals, sound beams, digital i nput, and the OSD.
75 En MANUAL SETUP AD V ANC ED OPERA TION English Use the remote control to ac cess and adjust each parameter . y Y ou can adjust the SET MENU parameters while the unit is reproducing sound . 1 Set the operat ion mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV .
76 En MANUAL SETUP Use to manually a djust the va rious parameters related to the sound beam ou tput. SET MENU → MANU AL S ETUP → BEAM MENU y Y ou can adjust the sound beam ou tput lev e l of each channel in “ Adjusting the audio balance” (see page 87).
77 En MANUAL SETUP AD V ANC ED OPERA TION English • Select ANGL E TO W ALL OR CORNER if t his unit is installed in the corner of y our listening room. Adjust the width and length of you r listening room as well as the distance of the listening posit ion from this unit.
78 En MANUAL SETUP BEAM TRA VEL LENGTH (Beam travel length) A certain amount of delay mu st be applied to the sound from each channel so that al l sounds can arri ve at the listening position at the same time .
79 En MANUAL SETUP AD V ANC ED OPERA TION English TREBLE GAIN (T reble gain) Use to adjust the high-frequency output le vel of each channel. y If the reflection points of the fr ont left and right or .
80 En MANUAL SETUP Use to manually a djust the va rious parameters related to the sound output. SET MENU → MANU AL S ETUP → SOUND MENU ■ T ONE CONTROL (T one control) Y ou can adjust the tonal quality of sound beams. TREBLE (T reble) Use to adjust the high-frequency response.
81 En MANUAL SETUP AD V ANC ED OPERA TION English ■ A UDIO DELA Y (A udio delay) Use to delay the sound output and synchronize it with the video image.
82 En MANUAL SETUP Use to manually a djust the va rious parameters related to the audio and video input. SET MENU → MANU AL S ETUP → INPUT MENU ■ INPUT ASSIGNMENT (Input assignment) Use to assign the HDMI IN jacks of this unit to other components if the initial settings of this unit do not correspond to your needs.
83 En MANUAL SETUP AD V ANC ED OPERA TION English ■ INPUT TRIM (Input trim) Use to adjust the input le vel of the input source. • Select TV/STB AN ALOG to adjust the le vel of audio and video signals input at the TV/STB A UDIO INPUT jacks of this unit.
84 En MANUAL SETUP ■ HDMI SET (HDM I settings) Use to change the HDMI audio/video output/input to match the connected component. Choices: SUPPOR T A UDIO (Support audio), A UDIO SELECT (Audio select.
85 En MANUAL SETUP AD V ANC ED OPERA TION English • Select OFF to de activ ate the HDMI up-conv ersi on feature • Select THR OUGH not to up- scale any analog video signals. • Select 480p (or 576p), 1080i, or 720p to up-scale analog video signals to 480p (or 576p), 1080i, or 720p of resolution.
86 En MANUAL SETUP Use to manually a djust the va rious parameters related to the display . SET MENU → MANU AL S ETUP → DISPLA Y MENU ■ F .DIS PLA Y SET (Fr ont panel displa y settings) Use to adjust the brightne ss and display settings of the front pa nel displ ay .
Adjusting the audio balance 87 En AD V ANC ED OPERA TION English Y ou can adjust the sound beam output level of each channel b y using the test tone or the a udio output being p layed back in each beam mode to achie ve a more true-to-life surround sound e xperience.
88 En Adjusting the audio balance 5 Press TEST when you ha ve completed all your adjustments. • All channel levels cannot be adju sted when the 2-channel or 5- channel stereo playback (see pa ge 62), My Beam (see page 63), or My Surround (see page 57) is selected as the beam mode.
89 En Adjusting the audio balance AD V ANC ED OPERA TION English 3 Press / to adjust the channel v olume . Control range: –10.0 dB to +10.0 dB 4 W ait for a fe w seconds without operating this unit when y ou have comp leted y our adjustment.
Selecting the input mode 90 En Y ou can select the type of audio input si gnals of the selected input source accord ing to your prefer ence or the conditions of the input source. This function is av ailable for TV/STB, DVD, A UX1, and A UX2. y W e recommend setting the input mo de to A UTO in most cases.
Adjusting the system parameter s 91 En AD V ANC ED OPERA TION English This unit has additional menus that are displayed in the front panel display . Thes e menus offer additional operations to adjust and customize the w ay this unit operates. When “F .
92 En Adjusting the system pa rameters P arameter to be c hanged and fr ont panel display P a rameter settings MEMOR Y PRO TECT Y ou can protect the settings you sa ved in th e system memory of this unit from being accidentally erased or unwantedly changed.
93 En Adjusting the system parameter s AD V ANC ED OPERA TION English 7 Press ST ANDBY/ON on the remote control to set this unit to the standby mode. The new setting will be ac ti vated when you turn on the po wer of this unit nex t time.
Remote control features 94 En In addition to controlling this unit, th e remote control can also operate other A V components made by Y amaha and other manufacturers. T o control othe r components, you must set up the remote cont rol with the appropriate remote control codes and set the operation mode selector to TV/A V to change the control area.
95 En Remote control features AD V ANC ED OPERA TION English ■ Operating y our TV Set the operation mode se lector to TV/A V, and press TV to select TV as the input source. The control area of the remote control changes to the TV operation mode. 1 Numeric buttons Selects a TV channel for playback.
96 En Remote control features ■ Operating y our D VD play er/recor der Set the operation mode selector to TV/A V and press DVD to select D VD as the inp ut source. The control area o f the remote control c hanges to the D VD operation mode. 1 Numeric buttons Enter numeric digits.
97 En Remote control features AD V ANC ED OPERA TION English ■ Operating y our VCR Set the operation mode se lector to TV /A V and press A UX1 to select VCR as the input source. The control area of the remote control changes to the A UX1 operation mode.
98 En Remote control features The TV macro feature makes it possible to perform a series of operations with th e press of a single b utton. For example, when you wa nt to play a D VD, you would normally turn on the component, select D VD as the input source, and press the play b utt on to start playback.
99 En Remote control features AD V ANC ED OPERA TION English ■ Setting macr os for the TV without the tuning capabi lity 1 Press and hold CODE SET and press one of the input selector buttons to select the input source y ou want to set macros fo r . Proceed to step 2 while holding do wn CODE SET.
Troubleshooting 100 En Refer to the chart belo w when this unit does not function properl y . If the problem you are e xperiencing is not listed below or if the instruc tion below does not he lp, set this unit to th e standby mode, disconnect the A C power supp ly cable, and contact the nearest authorized Y a maha dealer or service center .
101 En Troubleshooting ADDITIONAL INFORMA TION English Prob lem Cause Remedy See page No sound from the subw oofer . B A SS OUT in SUBWOOFER SET is set to FR ON T. Select SUBWOOFER. 80 The source does not c ontain low bass signals. Distort ed or too little bass sound.
102 En Troubleshooting ■ Remote cont ro l ■ HDMI ■ FM tuner Problem Cause Remedy See page The remote con trol does not work and/or function properly . Wro ng dist anc e o r a ngle . The remote cont rol functions within a maximum range of 6 m (20 ft) an d no more than 45 degrees off-axis from the front panel.
103 En Troubleshooting ADDITIONAL INFORMA TION English ■ XM Satellite Radio ■ iP od In case of a transmission error with no status message appearin g in the front panel display and in the OSD, check the connectio n between your iPod and this unit.
Glossary 104 En ■ Dolb y Digital Dolby Digital is a digital surround sound system that gi ves you completely independent mu lti-channel audio. W ith 3 front channels (left, center , and right) and 2 surround stereo channels, Dolby Digita l provides 5 f ull-range audio channels.
105 En Glossary ADDITIONAL INFORMA TION English ■ LFE 0.1-chan nel This channel is for the reproduction of lo w bass signals. The frequency range for this channel is 20 Hz to 120 Hz.
Index 106 En ■ Numerics 3 Beam .......... ............ ........... ........... ........... ........... .......... 57 5 Beam .......... ............ ........... ........... ........... ........... .......... 56 ■ A A C power supply cabl e ........ .
Specifications 107 En ADDITIONAL INFORMA TION English AMP SECTION • Ma ximum Output Power ................ ....................... .......... 2 W (1 kHz, 10% THD, 4 Ω ) × 21 20 W (100 Hz, 10% THD, 4 Ω ) × 2 SPEAKER SECTION •D r i v e r Small dia.
i List of remote contro l codes TV ADMIRAL 292, 293, 216 AIW A 294, 276, 283, 284 AKAI 295, 296 ALB A 296 A OC 297 BELL & HO WELL 292 BEST AR 298 BLA UPUN KT 229, 222 BLUE SKY 298 BRANDT 223 BROC .
ii RCA 744, 792, 793 SCIENTIFIC A TLANT A 752, 753, 754, 789 SONY 756, 757 TOCOM 755 UNIVERSAL 769, 772, 773, 774, 775 VIEWST AR 764, 766, 776, 777, 778, 779, 782 SA TELLITE TUNER ECHOST AR 822 GE 837.
.
.
YSP-3050 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGE THORPE AVE., BUENA PARK, CALIF. 90 620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCA RBOROUGH, ONTARIO M1S 3 R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 2 5462 RELLINGEN BEI HAMB URG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.
©2008 All rights reserved. Printed in Malaysia WK75620 [En] HDMI OUTPUT HDMI OUT IN DVD STB OUT SUBWOOFER VIDEO HDMI INPUT Subwoofer AUDIO INPUT VIDEO INPUT OUT AUX 1 TV/STB TV/STB SUBWOOFER AUX 1 DV.
Subwoofer AUTO SETUP START Will begin in 20sec Please leave the room **-------- [RETURN]:Cancel AUTO SETUP PREPARATION & CHECK Please connect the MIC. Please place the MIC at least 1.8m/6ft away from the YSP unit. The MIC should be set at ear level when seated.
An important point after buying a device Yamaha Digital Sound Projector YSP-3050 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha Digital Sound Projector YSP-3050 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha Digital Sound Projector YSP-3050 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha Digital Sound Projector YSP-3050 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha Digital Sound Projector YSP-3050 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha Digital Sound Projector YSP-3050, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha Digital Sound Projector YSP-3050.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha Digital Sound Projector YSP-3050. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha Digital Sound Projector YSP-3050 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
