Instruction/ maintenance manual of the product RS2 Yale
Go to page of 18
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
ii SAFETY PRECAUTIONS Each Y ale RS2 Manually Lever Operated Hoist is built in accordance with the specifications contained herein and at the time of manufacture complies with our interpretation of applicable sections of *ASME B30.21, *ANSI/ASME HST - 3M and the Occupational Safety and Health Act-1970.
iii 1 CHOOSE THE RIGHT HOIST FOR THE JOB... Choose a Y ale Lever Hoist with a capacity f or the job. Know the capacities of your hoists and the weight of your loads.
SPECIFICA TIONS The Y ale RS2 Lever Hoist is a highly versatile manually lever operated chain hoist that can be used to efficiently pull, lift, drag or stretch. S tandard features of the hoist include: • Alloy steel liftwheel to reduce chain wear . • Hoistaloy ® load chain for long and dependable service.
2 Regardless of how the hoist is used, make sure that the upper hook is firmly attached to a support or anchor that has sufficient strength to hold several times the rated load of the hoist.
3 4. Pull on hook side and loose end side of load chain to make sure chain feeds freely into and out of the hoist. 5. Grasp unit by frame or upper hook and pull on end ring or lower hook to pull the chain through hoist to the length required to attach lower hook to load.
4 load the unit, then check to be sure that the attachments to the hooks and load are firmly seated. Continue movement only after you are assured the load is free of all obstructions. The hoist has been designed for hand powered operation only . Do not use an extension on the lever .
5 Inspection of hoists is divided into two general classifications designated as “frequent” and “periodic”. Frequent Inspections These inspections are by the operator or other designated personnel. Frequent inspections are to be performed daily or prior to each use and they are to include the following: A.
6 Also check chain for stretch using a vernier caliper as shown above. Select an unused, unstretched section of chain (usually at the loose end) and measure and record the length over 1 1 chain links (pitches). Measure and record the same length on a worn section of chain.
When lubricating parts adjacent to the brake, DO NOT use an excessive amount of lubricant which could seep onto the brake surfaces. EXTERIOR FINISH The exterior surface of the RS2 Lever Hoist has a durable, scratch resistant baked powder coating. Normally , the exterior surfaces can be cleaned by wiping with a cloth.
8 J. Assemble pawls (673-19) to pawl shaft s (673-22) and secure with snap rings (673-32). Place pawl springs (673-21) on pawl shaft s and insert these assemblies into frame (673-2). K. Slide friction hub (673-12) onto pinion (673-9) and place one friction disc (673-13) on top of friction hub.
screw . If screw has been removed and replaced, always use new spots for locking. On the 3 ton unit, hang it in the vertical position. Making sure there are no twists in the chain, feed the end of chain thru the hook block (673-71) and around lower sheave (637-70).
KEY NO. P ART NAME P ART NUMBER NO. REQ’D. 3/4 TON 1 1/2 TON 3 TON 673-1 1 Liftwheel Bearing 88645 88442 673-2 1 Frame (includes 673-3 and (4) 673-4) 73304Y 73331Y 673-3 1 Pinion Bearing, frame end .
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
i 1 1 12 Load Limiter (Optional) W ARNING USING “COMMERCIAL” OR OTHER MANUF ACTURER’S P ARTS TO REP AIR THE RS2 LEVER HOIST MA Y CAUSE LOAD LOSS. TO A VOID INJURY : USE ONL Y Y ALE SUPPLIED REPLACEMENT P ARTS. P ARTS MA Y LOOK ALIKE BUT Y ALE P ARTS ARE MADE OF SPECIFIC MA TERIALS OR PROCESSED TO ACHIEVE SPECIFIC PROPERTIES.
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
13 P ART NUMBERS FOR P ACKAGED LUBRICANTS USED IN THE RS2 LEVER HOISTS (REFER TO P AGE 6 FOR LUBRICA TION INSTRUCTIONS) LUBRICANT TYPE OF P ART NUMBERS AND USAGE LUBRICANT P ACKAGED QUANTITIES OF LUBRICANTS 3 T ON LOWER SHEA VE BEARING GREASE-GRAPHITE 40626 (1 LB.
An important point after buying a device Yale RS2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yale RS2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yale RS2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yale RS2 you will learn all the available features of the product, as well as information on its operation. The information that you get Yale RS2 will certainly help you make a decision on the purchase.
If you already are a holder of Yale RS2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yale RS2.
However, one of the most important roles played by the user manual is to help in solving problems with Yale RS2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yale RS2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
