Instruction/ maintenance manual of the product PRO30 4 GAS VI Bertazzoni
Go to page of 31
1 INSTALLATION, USE & CARE MANUAL FREESTANDING GAS RANGES Models PRO30 4 GAS X [ M7S0GNU7X (2,5)A] Models PRO30 4 GAS AR [ .
2 BERTAZZONI SpA Via Palazzina 8 42016 Guastalla RE ITALY WWW.BERTAZZONI ‐ ITALIA.COM From the desk of the Preside.
3 TABLE OF CONTENTS WARRANTY AND SERVICE ......................................................................................................................... 4 CUSTOMER SERVICE .................................
4 WARRANTY AND SERVICE All Bertazzoni products carry a 2 year parts and labor warranty. Service on all Bertazzoni products shall be carried out by factory ‐ trained professionals only.
5 IMPORTANT SAFETY INFORMATION PLEASE READ AND FOLLOW THESE IMPORTANT INSTRUCTIONS FOR THE SAFETY OF YOUR HOME AND OF THE PEOPLE LIVING IN IT. Save this Manual for local electrical inspector’s use.
6 PRODUCT SPECIFICATIONS Dimensions (insert drawings front, side and ba ck Weight Burner power Natural gas LP gas.
7 BEFORE INSTALLATION This appliance shall only be installed by an authorized professional. This appliance shall be installed in accordance with the manufacturer’s installation instructions.
8 INSTALLING THE LEGS Bertazzoni ranges must be used only with the legs properly installed. Four height ‐ adjustab le legs are shipped with the range in the polysterene container situated over the appliance.
9 INSTALLING THE BACKGUARD The backguard must be installed prior to operation of the appliance for appropriate ventilation of the oven compartment. The supplied backguard is a 2 ‐ part assembly.
10 INSTALLING THE ANTI ‐ TIP STABILlTY DEVICE The anti ‐ tip bracket shipped with the range must be properly secu red to the rear wall as sh own in the pircture below.
11 INSTALLATION ADJACENT TO KITCHEN CABINETS This range may be installed directly adjacent to existing countertop high cabinets (36" or 91.5 cm from the floor).
12 ELECTRICAL CONNECTION This unit is manufactured for a polarized, grounded 120 volt/60 Hz, 16 amp system.
13 GAS CONNECTION All gas connections must comply with national and local codes. The gas supply line (service) must be the same size or greater than the inlet line of the appliance.
14 PRESSURE REGULATOR Since service pressure may fluctuate with local demand, every gas cooking appliance must be equipped with a pressure regulator on the incoming service line for safe and efficient operation.
15 GAS CONVERSION WARNING! Before carrying out this operation, disconnect the appliance from gas and electricity. Gas conversion shall be conducted by a fac tory ‐ trained profession al.
16 STEP 2: SURFACE BURNERS To replace the nozzles of the surface burners, lift up the burners and unscrew the nozzles shipped with the range using a 7 mm {sochet wrench).
17 Unscrew the nozzle located inside the gas fitting using a 7 mm [ socket wrench]. Replace the nozzle using the conve rsion set supplied with the range or by a Bertazzoni authorized parts warehouse.
18 STEP 5: VISUAL CHE CKS Before reinstalling the bottom pane l, the following visual check must be performed to ensure that .
19 STEP 6: MINIMUM FLAME ADJUSTMENT WARNING! These adjustments should be made only for use of the appliance with natural gas.
20 Models PRO30 4 GAS X [ M7S0GNU7X (2,5)A] Models PRO30 4 GAS AR [ M7S0GNU7S (2,5)A] Models PRO30 4 GAS BI [ M7S0GNU7W (2,5)A] Models PRO3.
21 INSTALLATION CHECKLlST 1. Is the range mounted on its legs? 2. Is the backguard securely connected? 3.
22 USER MANUAL WARNING! Do not to cover the holes ins ide the oven with aluminium foil. Do not to cover the worktop with aluminium foil.
23 SURFACE COOKING SYMBOLS (**) Burner position (in this case front right burner).
24 TIPS FOR USING BURNERS CORRECTLY WARNING ! KEEP CHILDRE N AT A SAFE DISTANCE FROM THE APPLIANCE DURING OPERATION. DO NOT ALLOW CHILDREN TO OPERATE THE APPLIANCE.
25 OVEN COOKING SYMBOLS (**) Thermal bake selector Broiler selector Recommended control knob position for burner ignition .
26 GAS OVEN OPER ATION THERMOCOUPLE SAFETY VALVE Bertazzoni gas ovens are equipped with a thermocouple safety device and a thermostat to set the proper cooking temperature.
27 CONVECTION COOKING Bertazzoni gas oven are equipped with a CONVECTION fan. In convection mode, the fan situated at the back of the oven compartment creates horizontal forced ‐ air circulation.
28 MAINTAINING YOUR RANGE REPLACING THE OVEN LIGHT BULB WARNING! Disconnect power befo re servicing unit. To replace the oven light bulb, unscrew the protection cap that projects out inside the oven.
29 opposite making with the same orientation that has been disassembled, remembering that the smooth part both in vista and the remains inside the screen ‐ printed glass oven door.
30 IMPORTANT APPLIANCE INFORMATION MODEL ___________ ___________________ ______________________ __________ DATE INSTALLED ___________ _______________.
31 BERTAZZONI SpA Via Palazzina 8 42016 Guastalla RE ITALY WWW.
An important point after buying a device Bertazzoni PRO30 4 GAS VI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bertazzoni PRO30 4 GAS VI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bertazzoni PRO30 4 GAS VI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bertazzoni PRO30 4 GAS VI you will learn all the available features of the product, as well as information on its operation. The information that you get Bertazzoni PRO30 4 GAS VI will certainly help you make a decision on the purchase.
If you already are a holder of Bertazzoni PRO30 4 GAS VI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bertazzoni PRO30 4 GAS VI.
However, one of the most important roles played by the user manual is to help in solving problems with Bertazzoni PRO30 4 GAS VI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bertazzoni PRO30 4 GAS VI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center