Instruction/ maintenance manual of the product X348NT XO Vision
Go to page of 27
PWR PWR TOUCH SCREEN 1-DIN 7 TFT LCD DVD PLA YER X348NT MADE IN CHINA R.
1 Open/Close Source/Power Mute play/pause Eject RPT TIT TFT -LCD adjustment Display position adjustment Loading and Replacing the battery Basic operation Receiption collection Speaker collection Install the unit Remove the unit Band Band tuner AS/PS Contents Warning and Precautions.
2 Warnings and Precautions 1 Only connect the unit to a 12V power supply with negative grounding. Never install the unit where the operation for safety driving is restrained.
3 1 2 3 4 5 6 7 8 9 10 11 Never disassemble or adjust the unit without any professional guide. For details, please consult any professional car shop/ dealer for inquiry . If the front panel or the TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot.
4 Electric Connection T o front left speaker T o front right speaker T o rear left speaker T o rear right speaker White/Black White Gray/Black Gray Green lack /B Green Purple/Black Purple Ignition key sw tch i Car fuse box (main fuse) Battery ACC wire (Red) Battery wire (Y ellow) Ground wire (Black) (T o car chassis) CAR ANTENNA FRONT .
5 Before installing the receiver permanently , fit it in the approximate place in your car ,and connect the equipment according to the speakers and electrical connections. When your system is operated properly ,(preferably with the car engine running), follow the instructions for permanent installation of your system.
6 General Features ADJ CLOCK ST BAND BT MUTE EJECT V O L MIC IR RESET AUX IN STOP RPT SRC Adjust angle Stop/Clock Adjust angle RPT/ST 10 8 6 3 1 4 19 2 9 7 12 11 17 5 18 16 15 14 13 PWR.
7 General Features Pull out Loading and replacing the battery R emote Control Notes of remote control using: Aim the remote controller at the remote sensor on the unit. Remove the battery from the remote control or insert a battery insulator if the battery has not been used for a month or longer .
R emote Control 8 Button and Function 5 1 3 4 2 Mute Sub-T Band APS APS APS EQ EQ ST S T R/L N/P SRC PWR 1 2 3 4 5 6 7 8 9 0 Enter SEL CLK Tit l e Tit l e Setup AF TA PTY RDM PRG RPT PBC OSD ID 3 I D3.
9 Play operation ADJ CLOCK ST BAND BT MUTE EJECT V O L MIC IR RESET AUX IN STOP RPT SRC Adjust angle Stop/Clock Adjust angle RPT/ST PWR ON.OFF Press[ ] to eject the disc. Eject EJECT : Note: About 10 seconds after the disc ejected ,if not taken out, the disc will be absorbed in again.
Display position Adjustment CAUTION For smooth adjustment, make sure that you return the lateral angle to the neutral position and then adjust the tilt angle. Avoid physical shock on the display . Do not place any object on the display forcefully , or subject it to undue force.
Setup Operation 11 ENTER MENU: Press [MENU] button, then touch setting button, it will show in screen follows: MENU Video mode: Menu operation Audio mode: BASIC mode: BASS 0 TREBLE -0 7 BALANCE R0 6 A.
Band Press [BAND] button to transfer band. FM1 FM2 AM1 AM2 FM3 Band T une Manually T une Automatically T une Press[ ] button: adjust to higher frequency .(such as 87.5,87.55...) Press[ ] button: adjust to lower frequency(such as 105.5,105.0...) Holding down the [ ] button: search higher frequency station, and will stop when meeting one.
R adio Operation AF(Alternative Frequency) Press AF and then press[ ],the machine will scan signal get the best frequency of the local radio station. If meet a stronger signal of the same program. letter TP will appear on LCD , and unit will automatically choose the stronger signal sought.
L/R 14 Forward: Hold [ ] button down; Select chapter or section: press [ ] to choose last chapter , press [ ]to choose next. In the DVD mode, Rewind: Hold [ ] button down. RPT RPT : In the play mode press[ RPT ]button then can transit among the following status.
SD/USB Operation USB/SD play operation 15 USB/SD mode Inset USB/SD ,the play will to the USB/SD playing mode antomaticly . USB/SD mode Press [ ] button to play or pause.
16 - - The Bluetooth is wireless mode of transmission in short distance. Through Bluetooth function, the DVD unit establishes connection with Bluetooth handset. And then, these units can realize mutually controling and file transfering. Method : A: Press the [SOURCE] button, to return to main menu.
13590205862 13590205862 13590205862 17 Note: If the unit does not have this function, pls skip it. Some models of mobile phones are not supported by the Bluetooth module of this unit. Mobile phone After connected, you can make phone call through, touch screen or phone record.
TV Operation 18 TV operation Press [APS] or press [AMS] to search and store TV station automatically . Channel search: Press [SRC] to enter main menu, then press TV icon on TFT screen to enter . TV mode: Y ou need install TV antenna, when receive program.
1 2 ............ 1 ............ 1 External view ........ Number of items External view ........ Number of items The use of any accessories except of those provided might result in damage to the unit .Make sure only to use the accessories shipped with the unit ,as shown above.
21 What appears to be trouble is not always serious. Please check the following points before calling a service center . T roubleshooting Familiar characters and their meanings Characters Causes Remedies NO Disc Bad Disc Unkown Disc Region Error Disc is too dirty .
22 T roubleshooting General problems The fuse of the unit has been broken. Remedies Symptoms The unit cannot be powered on. Remote controller does not work. No sound comes out or it's hard to hear . Poor sound quality or sound distortion. User preset information is lost when ACC is off.
T roubleshooting TFT Monitor Remedies Characters are abnormal. Causes Abnormal display like as pulsatile stripes on the image and on. No image appears on the monitor and warning information is shown at all times. Symptoms The color system of DVD disc is not suited with the monitor .
T roubleshooting Radio T uner Mp3 playback Remedies Causes Symptoms Remedies Causes Symptoms It's hard to receive stations. Auto antenna is not extended completely . Auto antenna is not connected with the unit firmly . L OCAL function is on. Correct the connection according to (Electrical Connections Overall Diagram).
T roubleshooting 25 DVD player Remedies Causes Symptoms Disc cannot be inserted. There is a disc in the unit already . Eject the disc then insert another one. Disc cannot be played back. Disc is scratched. Change the disc. Disc is too dirty or wet. The pickup is dirty .
26 Specifications Liquid crystal panel.........................................7 inches wide Display weight ...........................................................1.7kg Number of pixels............................................33,6960 pixels Display method.
O WNER'S MANUAL Before installation and operating the unit please read this manual thoroughly and retain it for future reference 1 Y ear Limited Manufacturer Warranty - XO Vision warrants to the .
An important point after buying a device XO Vision X348NT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought XO Vision X348NT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data XO Vision X348NT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, XO Vision X348NT you will learn all the available features of the product, as well as information on its operation. The information that you get XO Vision X348NT will certainly help you make a decision on the purchase.
If you already are a holder of XO Vision X348NT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime XO Vision X348NT.
However, one of the most important roles played by the user manual is to help in solving problems with XO Vision X348NT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device XO Vision X348NT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
