Instruction/ maintenance manual of the product Baby Accessories Bernina
Go to page of 10
©2011 BERNINA of America, Inc. jpl Page 1 of 10 Create an adorable quilt for baby, youngster, or the young at heart using OESD Crafter’s Collection Snuggle Up and the Benartex Habitat Fabric Collec- tion.
©2011 BERNINA of America, Inc. jpl Page 2 of 10 Stitch the Embroidery & Appliqués Note: You may stitch the designs of your choice or refer to the section “Planning Circles” for the specific designs, design combinations, and fabric colors used for each block, as well as how to combine designs in BERNINA Embroidery Soft- ware v6.
©2011 BERNINA of America, Inc. jpl Page 3 of 10 Lower the presser foot so it rests on the folded bias strip. Position a test circle of fabric / Fuse & Fleece right side up in the binder attachment so the stitching will catch all layers.
©2011 BERNINA of America, Inc. jpl Page 4 of 10 Continue to stitch around the circle, making sure the cut edge of the circle stays in position and the bias continues to wrap the edge. Stop the machine as the beginning tail comes into view.
©2011 BERNINA of America, Inc. jpl Page 5 of 10 Quilt the layers together using one or more of the following suggestions: Echo quilt around the circles using Leather Roller Foot #55.
©2011 BERNINA of America, Inc. jpl Page 6 of 10 Remove the pin and stitch again beginning at the fold. Repeat the steps above until all four corners have been stitched. Stop stitching when you reach the first mark you made on the first side.
©2011 BERNINA of America, Inc. jpl Page 7 of 10 Click on the Write to Machine icon and send the design to a USB stick or your embroidery sys- tem. Monkeys Chasing T ails (14” x 20” moss yellow fabric; bind with bias co lor 2) Open design BC01402 — the small monkey.
©2011 BERNINA of America, Inc. jpl Page 8 of 10 With the plant selected, click on the Mirror Merge—Horizontal icon. Move the mouse with- out clicking until the second plant is on the left side of the hippo. Click the mouse when you are satisfied with the placement.
©2011 BERNINA of America, Inc. jpl Page 9 of 10 With the elephant still selected, move it down in the hoop until its rear feet are aligned with the plant. Select File > Insert Design and select design BC01406 — the small zebra. Move it to the left of the plant.
©2011 BERNINA of America, Inc. jpl Page 10 of from your embroidery machine. Consult your machine manual for specific instructions. However, if you have purchased the CD version of the collection, you may wish to use BERNINA Embroidery Software 6 as a transfer device to transfer designs from the computer to the ma- chine.
An important point after buying a device Bernina Baby Accessories (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bernina Baby Accessories yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bernina Baby Accessories - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bernina Baby Accessories you will learn all the available features of the product, as well as information on its operation. The information that you get Bernina Baby Accessories will certainly help you make a decision on the purchase.
If you already are a holder of Bernina Baby Accessories, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bernina Baby Accessories.
However, one of the most important roles played by the user manual is to help in solving problems with Bernina Baby Accessories. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bernina Baby Accessories along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
