Instruction/ maintenance manual of the product XB525C Xantech
Go to page of 12
08905092C - 1 - INSTALLATION INSTRUCTIONS Ceiling and In-Wall Speaker Systems INTRODUCTION The XTC and XTC Reference series loudspeakers are the result of Xantech’s commitment to build the best speakers possible.
08905092C - 2 - APPLICATION – SINGLE ZONE A single zone setup can be created using an audio re ceiver, general purpose am plifier, or a multi- room amplifier.
08905092C - 3 - ADVANCED APPLICATION – LARGE AR EA, MULTIPLE SPEAKER SYSTEMS Large areas such as gathering rooms or banquet ha lls may require more than a single pair of speakers. Multiple speakers can be connected to the same amplifier channel. This application requires careful understanding of t he amplifiers capabilities.
08905092C - 4 - REQUIREMENTS – SPEAKER PLACEMENT The best sound can be achieved by making sure the speakers are placed is the best position possible. The surface material shoul d be similar for right and left pairs. Also, the cavity volume behind each speaker should be identical.
08905092C - 5 - CAUTION: In-Ceiling Installation Be sure that the ceiling material has a good integrity and is of a material and thickness to support th e weight and vibrations of the speaker installation. NEW CONSTRUCTION INSTALLATION The preferred method for new construction installation is using Xantech’s new-construction brackets.
08905092C - 6 - 3) The baffle part of the speaker system can now be installed into the speaker bezel. Place the baffle into the bezel frame. Use the dog-ears on the speaker bezel to secure the system into place.
08905092C - 7 - EXISTING CONSTRUCTION INSTALLATION 1) Determine the location for t he installed speaker. Use a stud-fi nder to locate the studs behind the wall. It is a good idea to use a voltage detector to determine if any live wiring is in the area.
08905092C - 8 - 5) Connect the speaker wires to the speaker and place the speaker inside the wall cavity. 6) Carefully tighten the clamping screws. Be sure to alternate diagonally between each screw position. For wall speakers, carefully adjust the frame level after each screw is installed.
08905092C - 9 - FINISHING TOUCH – PIVOTABLE TWEETER All speaker models, except the stereo ceiling models, have pivot-able tweeters. As mentioned in the speaker placement section, the tweeter should be leve l to the listener’s ear.
08905092C - 10 - TROUBLESHOOTING 1. POLARITY It is a good idea to test the polarit y of the speaker and wir e connection. Testing the polarity confirms that positive (+) wire is connected to the positive (+) terminal on the speaker and amplifier.
08905092C - 11 - SPECIFICATIONS XB525C Speaker Type: Ceiling Mount Driver size: 5.25” Woofer / 22mm T weet er Recommend Amplifier Power: 5-60 Watt s Frequency Response: 50 Hz-22kHz Impedance: 6 or 8 ohm selectable Sensitivity (1Watt/1Meter): 90dB Overall Dimensions: 7.
08905092C - 12 - SPECIFICATIONS XA65C Speaker Type: Ceiling Mount Driver size: 6.5” Woofer / 22mm Tweeter Recommend Amplifier Power: 10-85 Watts Frequency Response: 40 Hz-30kHz Impedance: 6 or 8 ohm selectable Sensitivity (1Watt/1Meter): 90dB Overall Dimensions: 9.
An important point after buying a device Xantech XB525C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech XB525C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech XB525C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech XB525C you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech XB525C will certainly help you make a decision on the purchase.
If you already are a holder of Xantech XB525C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech XB525C.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech XB525C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech XB525C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
