Instruction/ maintenance manual of the product WPK6 Xantech
Go to page of 10
1 Controllers INST ALLA TION INSTRUCTIONS WPK1, 4, 6 and 8 THE WATERPAD™ WATERPROOF PROGRAMMABLE KEYPAD SYSTEM CD TNR TNR VOL VOL SA T CA TV TUNER T APE VCR1 DVD VCR2 OFF DISC --- DISC + INTRODU.
2 CD VOL VOL TUNER TNR TNR DISC + DISC --- OFF MUTE SA T DVD WPK1 • Two tiers of memory per button. Applies to both source select and control function buttons. • Sequence commands, including 1 to 30 second delays, can be programmed under any button (including the 2nd tier) without using up button spaces anywhere else on the keypad.
3 Controllers WPK1 T APE DVD CD CA TV SA T TUNER CH GUIDE MENU MUTE OFF VOL VOL CH DISC CD VOL VOL CA TV DVD VCR OFF SA T TUNER T APE LD CH CH DISC MUTE WPK-6 This version has 14 function buttons and 6 source buttons. Use this when you wish to control five or six source components.
4 The next step is to determine which Waterpad version and keypad button icons are required to perform this job, as follows: 1. Since there are 4 sources , 4 banks will be required. We will need the WPK-4 Waterpad version as shown in Fig. 1 . PLEASE NOTE: All four versions of the Waterpad appear the same before the button Icons are applied.
5 Controllers 8. The Waterpad is now wired into the final system (refer to Figs. 3 & 5 ) and all commands tested again -- before applying the button icons. 9. If the system functions correctly, the button icons can then be applied, as shown in Fig.
6 Fig. 5 Cable Terminations +12V (red) ST ATUS (green) COMMON (orange) RX (blue) TX (brown) Six foot 7-Conductor Cable (End of cable is not waterproof-see text).
7 Controllers #6-32 x 5/16 PH Flat Hd Screw (4) #6-32 x 1/2 Slot White Oval Hd Screw (4) Decorator Style Cover Plate Water tight WA TERP AD™ Unit (side view) Adapter Plate CAUTION: Pressure Relief Hole. See step 7 below. #4-40 x 1/4 PH Pan Hd Screw (1) and O-ring (1).
8 Wall Material #6-32 x 3/4 PH Flat Hd Screw (4) 3 Water tight WA TERP AD™ Unit (side view) 2 #6-32 x 1/2 Slot White Oval Hd Screw (4) 1 #6-32 x 5/16 PH Flat Hd Screw (4) 8 Decorator Style Cover Plate 9 Adapter Plate CAUTION: Pressure Relief Hole.
9 Controllers WPK1 TROUBLESHOOTING If you encounter problems, review each of the following items and take corrective action as described. If problems persist, contact Xantech Technical Support. 1 . The Waterpad does not have RESTORE or CLEAR MEMORY buttons as does the SmartPad 2 or 3 .
10 WPK1 1-29-01 Rev.D Use these blank Waterpad panels when planning button layouts..
An important point after buying a device Xantech WPK6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech WPK6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech WPK6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech WPK6 you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech WPK6 will certainly help you make a decision on the purchase.
If you already are a holder of Xantech WPK6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech WPK6.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech WPK6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech WPK6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
