Instruction/ maintenance manual of the product WIC1200 Xantech
Go to page of 2
28EXT External Emitter Adapter INSTALLATION INSTRUCTIONS DESCRIPTION The 28EXT External Emitter Adapter is placed between a Xantech IR system and a list of approved electronic equipment that feature a rear panel IR input jack.
TABLE A (continued): APPLICATION #5 – VERIZON® F iOS™ MOTOROLA® RECEIVERS Model: QIP7000 Series Connector marking: IR RECEIVER INPUT TIP +5VDC Power RING SIGNAL SLEEVE GROUND Wire-Swap Connector Required CONNECTIONS • Connect the 28EXT output, using the Wire-Swap Con nector if required, to the equipment’s IR input.
An important point after buying a device Xantech WIC1200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech WIC1200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech WIC1200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech WIC1200 you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech WIC1200 will certainly help you make a decision on the purchase.
If you already are a holder of Xantech WIC1200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech WIC1200.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech WIC1200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech WIC1200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
