Instruction/ maintenance manual of the product HDMI4X4 Xantech
Go to page of 9
- 1 - HDMI4X4 User Manual www.xantech.com.
- 2 - INTRODUCTION Thank you for purchasi ng the 4x4 HDMI Matrix. The 4x4 HDMI Matrix switches four HDT V sources to any four HDMI displays. The 4x4 HDMI Matrix switcher has four HDM I inputs and four HDMI out puts. Matrix input #1 and the HDMI port of HDTV source #1 connects using a male to male HDMI cable.
- 3 - OPERATION NOTES READ THESE NOTES BEFORE INSTA LLING OR OPERATING THE HDMI4X4 • You should connect all the cables and power supply prior to connecting power to the HDTV sources and 4x4 HDMI Matrix. • When powering the sources, the display needs to point to the source input.
- 4 - DIP SWITCH GUIDELINES Inside the 4x4 HDMI Matrix is a bank of Dip Switches . Below is a table describing their functions. By default, all switches are set to the Off position.
- 5 - IR CODES In the event of IR confli cts, please do the following: 1. Remove the battery cover from the back of the RMT16-IR remote. 2. Locate the Dip Switches above the batteries 3. Switch the Dip Switches on the RMT16-IR to any of the combinations pictured below.
- 6 - RS232 INTERFACE ASCII Corresponding RMT16-IR Binary 1 1 0011 0001 2 2 0011 0010 3 3 0011 0011 4 4 0011 0100 5 5 0011 0101 6 6 0011 0110 7 7 0011 0111 8 8 0011 1000 9 9 0011 1001 A 10 0110 0001 B.
- 7 - 4X4 HDMI MATRIX RACK MOUNT DIAGRAM.
- 8 - TECHNOLOGY TERMINIATION DDC Short form for Display Data Channel. It is a VESA standard for communication between a monitor and a video adapter. Using DDC, a monitor can inform the video card about its properties, such as maximum resolution and color depth.
- 9 - SPECIFICATIONS Video Amplifier Bandwidth 1.65 Gbps Input Video Signal 1.2 volts p-p Input DDC Signal 5 volts p-p (TTL) Single Link Range 1080p / 1920 x 1200 HDMI Input/Output Connector Type A 19-pin Female Remote Control Port RS-232 Female, Mini-Stereo Power Consumption 60 watts (max) Power Supply 24V DC Dimensions 17” W x 1.
An important point after buying a device Xantech HDMI4X4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech HDMI4X4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech HDMI4X4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech HDMI4X4 you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech HDMI4X4 will certainly help you make a decision on the purchase.
If you already are a holder of Xantech HDMI4X4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech HDMI4X4.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech HDMI4X4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech HDMI4X4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
