Instruction/ maintenance manual of the product VK68A X10 Wireless Technology
Go to page of 2
Operation Press any button (1-8) on the KR28A remote control (included) to turn on the camera attached to that channel on the VS10A. When you turn on any camera the others in the group turn off.
The KR28A Remote Control sends W ireless Radio Frequency (RF) signals to the VS10A. It is normally set to Housecode A and controls cameras connected to channels 1 thru 8. Y ou can however change the Housecode: T o change the Housecode for the KR28A remote 1 .
An important point after buying a device X10 Wireless Technology VK68A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought X10 Wireless Technology VK68A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data X10 Wireless Technology VK68A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, X10 Wireless Technology VK68A you will learn all the available features of the product, as well as information on its operation. The information that you get X10 Wireless Technology VK68A will certainly help you make a decision on the purchase.
If you already are a holder of X10 Wireless Technology VK68A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime X10 Wireless Technology VK68A.
However, one of the most important roles played by the user manual is to help in solving problems with X10 Wireless Technology VK68A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device X10 Wireless Technology VK68A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
