Instruction/ maintenance manual of the product MK19A X10
Go to page of 27
M ODEL MK19A W IRELESS M OUSE R EMOTE S YSTEM I NCLUDES JR20A M OUSE R EMOTE AND JR21A W IRELESS R ECEIVER O WNER S M ANUAL.
3 2 FCC C AUTION THIS DEVICE COMPLIES WITH P ART 15 OF THE FCC RULES. OPERA TION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MA Y NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THA T MA Y CAUSE UNDESIRED OPERA TION.
5 4 I NTRODUCTION Congratulations on your purchase of the X-10 Mouse Remote and Wireless Receiver . Wireless Mouse.... The MK19A kit consists of a remote control (JR20A) and a wireless receiver (JR21A). The remote control sends wireless RF signals to the receiver which is connected to your PC.
7 6 S ETTING U P YOUR M OUSE R EMOTE B UTTON D ESCRIPTIONS INDICA TOR LIGHT The indicator light flashes when a key is pressed (if the key is available in the selected mode). POWER W orks in the same way as your original remote. T urns All Lights On in X-10 mode.
9 8 The Mouse Remote buttons can be programmed to per form various functions using the Mouse Remote software, but they are pre-programmed with the following defaults: When PC mode is selected the keys.
11 10 When DVD mode is selected the keys default to the following: Key DVD Power - Enter - Play - Rew - FF - Stop - Rec - Pause - 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 V ol+ Line Up V ol- Line Down CH+ Page Up CH- Page Down Mute Minimize A.
13 12 When PHONE mode is selected the keys default to the following: Key PHONE PHONE Default Dialer Power - Enter - Play - Rew - FF - Stop - Rec - Pause - 0 0 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 V ol+ Line Up V ol- Line Down CH+ Page Up CH- Page Down Mute Minimize A.
15 14 T o install the JR21A Mouse Receiver: First shut down and turn of f your PC. Unplug your mouse and plug the mouse Receiver into your PC s mouse port (use the enclosed adapter if you have a PS/2 port). Plug your existing mouse into the socket on the Receiver .
17 16 When the Mouse Remote picture is displayed, moving the cursor around the screen causes programmable buttons or buttons with additional help (setup/X- 10/TV/CBL/SA T/VCR) to illuminate. Double-clicking on these buttons will allow them to be programmed or show additional help.
19 18 System lets you set up any button to maximize, minimize, or resize windows, close applications, shut down Windows ® select the Windows 95 ® Star t button, etc. Messages This is an advanced feature that will primarily be used by programmers. It allows application specific infor mation to be directed to the associated windows application.
21 20 Note that the mouse pad and the buttons on the back of the remote are always active, no matter what mode the remote is in (PC, TV , VCR, etc.). Note however that the special function buttons (WEB, PHONE, CD, DVD) are only active after the PC button has been pressed.
23 22 codes for your brand. If it still doesnt respond, try the Code Search method on page 34. If the LED blinks rapidly when you enter the code , you may have entered an invalid code. Recheck the code in the code list and tr y again. If some buttons do not operate your equipment , try one of the other codes for your brand.
25 24 OPTIMUS .......................................................... 198 OPTONICA ................................................ 108,186 ORION ............................................................ 048 .....................................
27 26 HI-Q ................................................................. 036 ............................................................................. INST ANT REPLA Y ................................................ 034 ......................
29 28 ............................................................................. OAK .................................................. 015,029,042 ............................................................................. P ANASONIC ...........
31 30 ............................................................................. GE ................................................................... 078 GENEXXA .................................... 025,026,031,072 GOLDST AR .....................
33 32 4. Press and release the mode button that matches the A/V equipment you want to control. The LED blinks once. 5. Enter the 3 digit Code from the Library Code T ables. The LED tu r ns of f after the last digit entered. 6. Point the remote at your A/V component and press the POWER button.
35 34 1. Press and hold SETUP until the LED indicator lights steadily . Release Setup button. 2. Press the mode button that matches the equipment you want to identify The LED blinks once. For AUX, press AUX, then the mode button. 3. Press and release SETUP .
37 36 H OME A UTOMA TION The first thing you need to understand is that there are two dif f er ent devices you need to control your house; Controllers and Modules. Any light or appliance that you want to control is plugged into a Module and that Module is then plugged into a standard AC outlet.
39 38 I NST ALLING H OME A UTOMA TION C OMPONENTS T RANSCEIVER M ODULE The T ransceiver Module (sold separately) receives radio frequency (RF) commands from Mouse Remote to operate a lamp or appliance plugged into it. The T ransceiver Module also passes on commands over your house wiring to control other X-10 Modules.
41 40 If you have installed the T ransceiver Module (sold separately) you can control it and other X-10 modules as follows: 1. Press and release the X-10 button. 2. Use the number buttons to enter the Unit Code number of the chosen module. (Y ou do not need to enter 0 first for a single digit number .
43 42 2. Press and hold SETUP until the LED indicator lights steadily . Release the Setup button. 3. Use the number buttons to enter the number equivalent to the chosen House Code (1=A, 2=B ..16=P). 4. Press the ENTER button to confirm the House Code.
45 44 E XP ANDING YOUR S YSTEM The products illustrated below represent just a few of the wide range of X-10 compatible products you can choose from to expand your Home Automation system. They are available from electrical outlets, department stores and mail order catalogs.
47 46 T ROUBLESHOOTING The T ransceiver Module doesnt respond to the remote: Check the House Code of the T ransceiver Module is set to A. If you have changed the Housecode on the remote (see p. 43), check that it matches the Housecode on the module.
49 48 T ray Icon not visible (W indows 95): The X-10 mouse driver included with the system has not been installed, or the Mouse Remote has not been detected. Check that the driver has been installed and that all mouse connections have been made corr ectly .
51 50 W ARRANTY 12 MONTH LIMITED W ARRANTY X-10 (USA) INC. (X-10) W ARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTIVE MA TERIAL AND WORKMANSHIP FOR A PERIOD OF ONE (1) YEAR FROM THE ORIGINAL DA TE OF PURCHASE A T RET AIL.
X-10 (USA) Inc. 91 Ruckman Rd. Closter , NJ 07624-0420 http://www .x10.com Printed in China DR-MK19A - 10/97.
An important point after buying a device X10 MK19A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought X10 MK19A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data X10 MK19A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, X10 MK19A you will learn all the available features of the product, as well as information on its operation. The information that you get X10 MK19A will certainly help you make a decision on the purchase.
If you already are a holder of X10 MK19A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime X10 MK19A.
However, one of the most important roles played by the user manual is to help in solving problems with X10 MK19A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device X10 MK19A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
