Instruction/ maintenance manual of the product E-222 Berkel
Go to page of 12
BK46705 (February 2002) 12 • E-222 O WNER /O PERATOR M ANUA L O WNER /O PERA T O R M ANUAL IMPORTANT NOTICE This manual contains Important Safety Instructions which must be strictly followed when using this equipment.
E-222 O WNER /O PERATOR M ANUAL • 1 1 B EFORE U SING T HIS E QUIPMENT Berkel’s grinders are designed to chop meat and other food products safely and efficiently. However, unless the operator is properly trained and super- vised, there is the possibility of a serious injury.
E-222 O WNER /O PERATOR M ANUAL • 1 T ABLE OF C ONTENTS Page General Safety Instructions .................................................................................................... .......... 2-3 Equipment Ide ntification ..................
PELIGRO CUCHILLA FILOSA para evitar serios accidentes a su persona siga las instrucciones de este manual y 1. NUNCA toque esta maquina sin la capacitacion adequada, ni sin autorizaciùn de su supervisor. 2. SIEMPRE vea que la base del recipienta este bien atornillada y bien apretada.
E - 222 O WNER /O PE RATOR M ANU AL • 3 WARNING SHARP KNIFE BLADE to avoid serious personal injury follow all the instructions in this manual and 1. NEVER touch this machine without training and authorization by your supervisor. 2. ALWAYS check to see that all bowl mounting screws are in position and tight.
4 • E - 222 O WNER /O PE RATOR M ANU AL E QUIPMENT I DENTIFICATION Tray On/Off Switch Rammer Safety Guard Hopper Ring Plate Knife Feedscrew Fiber Washer Thrust Washer Thumb Screw.
E - 222 O WNER /O PE RATOR M ANU AL • 5 I NST ALLA TION S ITE S ELECTION Select a solid, level surface to install the E-222 chopper. This area should be well lit and large enough to allow easy access to all sides of the machine. E LECTRICAL Your E-222 chopper is manufactured with a 20-amp power cord and plug.
6 • E - 222 O WNER /O PE RATOR M ANU AL 4. Unscrew the ring from the cylinder. Place the knife, plate surface out, onto the feedscrew, mating the square hole with the square shaft. Insert the plate over the knife with the flat edge mating with the pin in the cylinder.
E - 222 O WNER /O PE RATOR M ANU AL • 7 C LEANING A N D S ANITIZING D ISASSEMBL Y 1. Unplug the chopper and remove the rammer. 2. Loosen the ring but don’t remove it. Loosen the thumbscrew and remove the entire cylinder. Take the cylinder to the sink.
8 • E - 222 O WNER /O PE RATOR M ANU AL 7. Plug the chopper in and run for one second. Turn off the chopper and check to see if the ring is tight. If it is loose, then tighten it. Your chopper is now ready to operate. M AINTENANCE The knives and plates should be kept together as a matched set.
E - 222 O WNER /O PE RATOR M ANU AL • 9 S PECIFICA TIONS M OTOR 115/60/1, 1hp, 18 amp C AP ACITY 15 to 20 pounds/minute (7 to 9 kg/min.) S PEED 235 rpm W EIGHT Net 100 lbs.
W ARRANTY Berkel Company (“Berkel”) warrants to the Buyer of new equipment that said equipment, when installed in accordance with our instructions and subjected to normal use, is free from defects in material or workmanship for a period of one (1) year from the date of sale.
An important point after buying a device Berkel E-222 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Berkel E-222 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Berkel E-222 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Berkel E-222 you will learn all the available features of the product, as well as information on its operation. The information that you get Berkel E-222 will certainly help you make a decision on the purchase.
If you already are a holder of Berkel E-222, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Berkel E-222.
However, one of the most important roles played by the user manual is to help in solving problems with Berkel E-222. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Berkel E-222 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
