Instruction/ maintenance manual of the product MANO472 Woods Equipment
Go to page of 16
I NST AL LA TION MAN U AL SA VE THIS MANU AL! Include it with your Backhoe Manual. It contains safety , operation, and repair part information not found in other manuals. 1012552 3-P OINT MOUNTING KIT For W oods BH70X, BH80X Backhoes MAN0472 (9/23 /2005) T ested.
2 Introduction SFMK (Rev . 6/6/2005) T O THE DEALER : Assemb ly and prop er installation of this pro duct is the re sponsi bility of the Woods ® dealer .
Safety 3 BH 3-Pt Mo unt (Rev . 2/2 5/2005) INST ALLA TION This Mounting Kit is to be used on l y for the backhoes and tractors specified in the Inst allation section of t his manua l. Any other use o r modifica- tion of this mounting k it may resul t in seriou s injury or death.
4 Safety BH 3-Pt M ount (Rev . 2/25/2 005) (Safety R ules continue d from previou s pag e) Alwa ys wear re lative ly tigh t and belt ed c lothing to avoid getting caught in moving p arts.
Inst allation 5 MAN047 2 (9/23/ 2005) BACKHOE 3-POINT MOU NT INST ALLA TION TRACTOR PREP ARA TION NOTE: For installin g this 3-poin t mountin g kit, refer- ence to r ight, left, for ward and rea rward di rection s are determin ed from the opera tor ’s position in the back- hoe seat.
6 Installation MAN04 72 (9/23/20 05) Att ach T op Link Bars to Backhoe 1. Attach top li nk bar (3) to the mai n frame usin g cap screw (8) , hardene d flat was her (15), an d hex nut (1 1).
Inst allation 7 MAN047 2 (9/23/ 2005) Att ach 3-Point Mo unt to Backhoe 3. Att a ch lock bar (7) to righ t (4) an d lef t (5) rear bracke ts using cap screws (9), fou r (two pe r side) hardened flat was hers (15 ), and h ex nuts (1 1). D o not tighten nuts at thi s time.
8 Installation MAN04 72 (9/23/20 05) Att ach Backhoe to T ractor (Cont inued) 5. Connect trac tor 3- point lowe r lift arms t o the mounting pi ns on the back hoe. Secur e using kl ik pin (14) and was hers (17). Us e washers to take up slac k between k lik pin and 3 -poin t arm.
Inst allation 9 MAN047 2 (9/23/ 2005) Remo ve Backhoe The only time the bac khoe may be operated from a position other than the operator seat is during backhoe a tt achme nt and removal. Opera- tor must • Read Mounting Kit Manual instructions on att aching and removing backhoe and use extreme c are.
10 Installation MAN04 72 (9/23/20 05) Atta ch Backhoe to T rac tor This mounting kit is designed to provide secure moun ting and adequ ate operator c lear- ance when properly inst alled. Check clearance dimensions shown in Figure 1 to be sure you have inst alled mounting kit correctly .
Inst allation 11 MAN047 2 (9/23/ 2005) T ract or Connections There may be mo re than on e hole provide d in tractor top link attachment br acket. Se lect hole A, B, or C that most ev enly distr ibutes the load between to p link bracke t top and b ottom m ountin g bolts.
12 Part s MAN04 72 (9/23/2005 ) 1012552 3-POINT MOUNTING KIT 17 1 8 10 8 3 7 11 15 4 9 15 5 14 16 15 15 11 15 11 12 11 15 6 13 CD6779 R E F P ART QTY DESCRIPTION 1 1007345 1 Doubl e top l ink 3 101253.
Appendix 13 Bolt T orque & Size Chart s (Rev . 8/14/02) BOLT T OR QUE CHA R T Always tighten har dware to these values unles s a different tor que value or tighte ning p rocedure i s list ed for a specifi c applica tion . F ast eners must al wa ys be repla ced with t he sam e grade as sp ecified in the m anual par ts list.
14 Appendix Bolt T orque & Size Chart s (Rev . 8/14/2002) BOLT SIZE CH AR T NO TE: Char t shows bolt thread s izes and co rrespo nding head (wrenc h) sizes for standa rd SAE and metr ic bol ts.
F-3079 (Rev . 9/21/2005) Wo od s E q u i p m e n t Company 260 6 South Illinois Ro ute 2 Post Offi ce Box 1000 Oregon, Illinois 61061 815- 7 32-2141 tel 815- 7 32- 7580 fax www .
F-8494 (Rev . 6/23/2005) W oods Equipm ent Company 260 6 South Illinois Route 2 Post Office Box 1000 Oregon, Illinoi s 610 61 815- 73 2-2141 tel 815- 73 2- 75 80 fax www .W oodsEquipme nt.com ©2005 Woods Equipment Company . All rights reserved. WOO DS, the Woods logo, and "T ested.
An important point after buying a device Woods Equipment MANO472 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Woods Equipment MANO472 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Woods Equipment MANO472 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Woods Equipment MANO472 you will learn all the available features of the product, as well as information on its operation. The information that you get Woods Equipment MANO472 will certainly help you make a decision on the purchase.
If you already are a holder of Woods Equipment MANO472, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Woods Equipment MANO472.
However, one of the most important roles played by the user manual is to help in solving problems with Woods Equipment MANO472. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Woods Equipment MANO472 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
