Instruction/ maintenance manual of the product VP150X BenQ
Go to page of 24
ULTRA PORTABLE PROJECTOR VP150X USER’S GUIDE Thank you for purchasing Benq Ultra Portable Projector. Please read this user’s guide to ensu re correct use of the device. Save this user’s guide for future reference. OUTLINE This Ultra Portable Projector can display various computer signal s and NTS C/PAL/ S ECAM video signals.
ii English Copyright Copyright © 2002 by Benq Corporat ion, formerly Acer Commun ications & Multimedia Inc.. All rights reserved. No part of this publication may b e reproduced, transmitted, tran.
Safety Inst ructions iii Safety Instructions 1. Read this user’s guide before you operate yo ur projector and save it for future reference. 2. When the lamp becomes extremely hot during operation, allow the projector to cool for approxi mately 45 minutes prior to removing the lamp assembly for replacement.
iv English TABLE OF CONTENTS INTRODUCTION ................................... ................................................. ............................... ................ 1 Projector Features ... ................ ............... ................
Introduction 1 INTRODUCTION Projector Features A. Image Resolution By using advanced intelligent compression technology, it is fully compatible with true XGA, and supports SXGA . The advanced intell igent compression technology enables the pr ojector to present clear compression XGA images without line omission.
2 English Description AF R O N T Figure 1. Front view BR I G H T Figure 2. Right view C BOTTOM Figure 3. Bottom view Projecton Lens Ventilation Hole Lamp cover.
Introduction 3 Installation AI m a g e S i z e A d j u s t m e n t z This projector is basically designe d to project on a flat projection surface. z This projector can be focused from 1m–12.3m. z Refer to Figure. 4 to adjust the screen size. Figure 4.
4 English Moving the Projector Use the carrying handl e when moving the projector. Replace the lens cover and rotate the fe et fully clockwise (to shorten the feet) when moving the projector to prevent damage it.
Introduction 5 Accessories Please check and ensure your box contains everything list ed below. Cont act your dealer , if any pieces are missing,. Please save the original box and packing materi als in case you ever need to ship the uni t.
6 English CONNECTION Connect the Projector to Computer Figure 8. Connect to PC Connect the Projector to Notebook Figure 9. Connect to notebook Computer In put Control Port Output Computer in Control P.
Connection 7 Connect the Projector to Macintosh Figure 10. Connect to M acintosh Connect the Projector to Power Book Figure 1 1. Connect to Power Book Connect to Video/ S-Video Figure 12.
8 English OPERATION Turn On/Off Procedure A Power on Press the Standby/On key to turn on th e lamp. The LED will blink green during warm up and then light solid green. z “INPUT SIGNAL DETECTED, ACTIVATING AUT O IMAGE” will be displayed on the screen after the projector identifies the input signal.
Operation 9 B Remote Control Figure 14. Re mote control MAIN UNIT FUNCTION Menu To call the OSD menu. To enter sub pages. To select items. To navigate through sub pages or to increase/decrease the scale bar number. Exit To exit from the current page or OSD menu, and save setting changes.
10 English The remote control allows you to operate the function k eys on the projector and to emul ate mouse function when the projector is connected to a computer. Inserting Batteries in the Remote Control Be sure to follow instruction s in placing batteries into the remote control un i ts.
Operation 11 Remote Control Range The remote sensors are located on the back of the unit. It can function in a range 50 degrees horizon tal and 30 degrees vertical relative to a li ne that is a right angle to the remote sensor. The distance between the remote control and remote sensor must be shorter th an four meters (13 feet).
12 English 2. Lamp is not well attached If the LED blinks rapidly, it indi cates that the lamp is not attached properly . 3. Temperature is too high If the internal tem perature of the projector is too hot to op erate safe ly, the LED will blin k slowly for one minute and then the lamp wil l turn off automatically.
Operation 13 Lamp Replacement Procedure Figure 17. Lamp replacement: Step 1, Step 2, Step 3 Resetting Lamp Timer Carry out the following operation within 10 minut es of powering on after a new lamp is installed. OSD FUNCTION Press Exit on the projector for 3 seconds or Exit on the remote control for 3 seconds and display the tota l lamp usage time.
14 English OSD Main OSD Menu Press Menu and the main OSD menu structure will appear as shown at right (Fi gure 18). Whenever AV connector is attached, 4 sub-pages appear in the menu: Display page, Image page, Control pa ge and Source page.
Operation 15 B Image Page Select the Image sub-page and Auto Resize wi ll be highlighted. There are five items on this page: Auto Resize, H. Phase, H. Size, H.
16 English CC o n t r o l P a g e DS o u r c e P a g e *The sequence of input signal detect ion: a. PC b. Video c. S-Video *When selecting input sources, the projector will detect the selected input simultaneously, and the OS D menu will still exist on the screen.
Operation 17 Other Correspondent and Remote Functions Messages OSD FUNCTION Source The selected source will be disp layed at the bottom right of the screen for 3 seconds afte r selecting the source. Freeze The image will be frozen when the Freeze i s p r e s s e d .
18 English MAINTENANCE AND TROUBLESHOOTING A Lamp Replacement Refer to page 11. BC l e a n i n g t h e L e n s Follow the steps below to clean the projection lens: 1. Apply a non-abrasive camera lens clea ner to a soft , dry cleaning cloth (abras ive clean ers, solvents or other harsh chemicals might scratch the lens) .
Specifications 19 SPECIFICATIONS AO p t i c a l LCD Panel 3 sheets of liquid cryst al panels, 3 primary color lights shutter system Lens Manual zoom, manual focus (F=1.73 to 2.17 f=3 7.8 to 49 mm) Lamp 150W UHE Image size 19 to 310 Projection Distance 1 to 13 M B Electrical Inputs RGB (H:31.
20 English.
An important point after buying a device BenQ VP150X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BenQ VP150X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BenQ VP150X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BenQ VP150X you will learn all the available features of the product, as well as information on its operation. The information that you get BenQ VP150X will certainly help you make a decision on the purchase.
If you already are a holder of BenQ VP150X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BenQ VP150X.
However, one of the most important roles played by the user manual is to help in solving problems with BenQ VP150X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BenQ VP150X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
