Instruction/ maintenance manual of the product STB1HD Wintal
Go to page of 23
.
Table of Contents I. General Information ........................................................................................... 3 1. Preface .........................................................................................................
4. Program Select ............................................................................................. 17 5. System Setting .............................................................................................. 17 5.1 Common Setup ...
I. General Information 1. Preface This High definition television set-top receiver is designed to pick up free-to-air digital broad casts. It is fully compliant with the MPEG-2 and DVB-T standards. This unit can receive digital terrestrial TV signals transmitted at the rate of 3.
3. For Your Safety Allow clear space around t he re ceiver for sufficient ventilation Do not cover the receiver ventilation slots or place it on a unit that emits heat Use a soft cloth and.
5. Rear Panel LOOP OUT: RF output to other tuners, such as your TV’s antenna input ANT IN: Connect to terrestrial ante nna HDMI OUT: HDMI audio/video output, connect to TV (recommended if available).
6. Remote Control Unit 6.
Keys specification Press to turn the receiver on/off Select a channel or to enter a number in menus Switch back to previous channel. Call the main menu, close current window and return to viewing.
Press to display information about current channel Press to switch between tele text / closed caption and normal modes Move up one page within menus Move down one page within menus Confirm / save resu.
II. Connection and Installation 1. System Connection Make sure the Power , T errestrial Ante nna, TV and other relevant equipm ent are connected properly before continuing. There are five different methods to transm it pi cture from the STB to your TV.
Connect the appropriate video lead from the STB to the TV , taking note of the A V input used on the television (A V1, A V2, HDM I etc) as you will need to select this input on your TV later . Con sult your TV manual fo r more information. Sound With all video connections except HDMI , an audio con nection must also be made.
Turn on the receiver using the ON /OFF switch on the back pan el of your receiver. Then, press the standby button on the fr ont panel. T he startup on-screen display (OSD) will be shown on the TV screen. T he startup OSD will remain for several seconds and then disapp ear.
III. Main Menu While not already in a menu, pres sing MENU will call the Main Menu. This menu consists of five items as shown belo w. Ins tallation Program Guide Program Manage Program Select System Setting Use to move up or down from one item to another.
1.2 Manual Search You can set parameters in Manual Search window if you are familiar with station frequencies. In this mode, channel s can be tuned in by hand.
to select appropriate value. Press OK key to confirm and exit from the Add Channel window. If succe ssful, you will find the new channel has been added t o end of the list. Note: this function is for advanced users. Delete This command allows you to delete one or more unwanted channels.
2. Program Guide Move the cursor to Program Guide and press OK to enter the P rogram Guide sub-menu. You can also enter this wi ndow by pressing EPG on the REMOTE under non-menu mod e. In Program Guide , use to move cursor between TV prog ram List and future programs (EPG), and keys to move up or down in each list.
Rename Press the blue key on the REMOTE to pop up a keypad window where you can rename the program. In this keypad window, select your re quired character by using direction key on the REMOTE and press OK . To switch betwee n capitalization and lowercase, please select Caps On and press OK key on the REMOTE.
4. Program Select In the Main Menu , use to select Program Select and pre ss OK . From here, the default mode is “TV” mode. In program list, are used to select the desired program and press OK to view this channel in full screen. 5. System Setting In the Main Menu , use to sele ct System Setting and press OK to enter the System Setting menu.
6. Shortcut Key Explanation In normal view mode, you can acce ss functions by pressing spe cial keys on the REMOTE. These keys will be explained as follows: 1. Program List Pressing OK or FAV on the REMOTE will display the Program List window. Pres s FAV again or keys to switch among favorite groups that you have defined (refer to Favorite Edit ).
6. Audio Press Audio to switch between the Subtitle Language and Audio Language window. Note that the available select ions in both audio an d subtitle language window depend on the broad cast. Use to select the appropriate language and press OK key to confirm.
IV. Technical Specification T uner Input frequency 147 ~ 862MHz UHF&VHF(IEC Female Co nnector) Input level -80 ~ -20 dBmV Input impedance 75 Ω Channel Decoding S tandard DVB-T EN300 744 Demodulation QPSK, QAM16, QAM64 Code rate 1/2, 2/3,3/4,5/6,7/8 Demultiplexer S tandard ISO/IEC 13818-1 Input max.
Temperature Rise <75 on winding & core; <50 on casting At 264V ac @ 50Hz Safety S tandard Designed to meet IEC/EN6065 Amb ie nt Operation temperat ure 0°C ~ +40°C V. Trouble Shooting Problem Possible Causes What to Do The display on the front panel does not light up.
Channels are not available after usin g “Auto Search” when installing the receive r for the first time. Wrong country selected. Restore defaults, and select the proper country . Can not lock signal by using “Manual Search”. The channel frequency is not accurate.
An important point after buying a device Wintal STB1HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wintal STB1HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wintal STB1HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wintal STB1HD you will learn all the available features of the product, as well as information on its operation. The information that you get Wintal STB1HD will certainly help you make a decision on the purchase.
If you already are a holder of Wintal STB1HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wintal STB1HD.
However, one of the most important roles played by the user manual is to help in solving problems with Wintal STB1HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wintal STB1HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
