Instruction/ maintenance manual of the product SD Winegard
Go to page of 8
1 RoadTrip ™ Digital Satellite Mobile Antenna for Two Receivers RoadTrip SD - Stationary Satellite System RoadTrip SDi - In-Motion Satellite System INSTALLATION MANUAL Made in the U.S.A. Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 319/754-0600 • FAX 319/754-0787 • www.
2 1 . Open box and remove packing material. 2. Lift dome out of box vertically . Then lif t unit out of box vertically . Do not turn box and “roll” out, or turn up side down to remove.
3 Installation Diagram Control Unit ELEVATION MOTOR LNBF CONTROL UNIT MUST BE PARALLEL TO THE CENTER LINE OF THE VEHICLE AND FACE FRONT OR REAR OF VEHICLE.
4 Quick Reference Guide Your Winegard RoadTrip satellite System has been designed to be the most user-friendly Mobile Satellite Antenna on the market today. Upon installation of the antenna, or after changing satellite service provider, simply set the switches inside of the dome to the settings shown in the Operation manual.
5 IMPORT ANT! Do not install this system in the rain, or under any wet conditions . Mois- ture may affect electronics and void your warranty! 1. For best performance and to reduce signal ac- quisition time, park vehicle on a level surface; level the R V .
6 Installation 1. Connect coax cables and power wire to RV pre- wire harness. Connect gray coax to pre-wire coax for primary receiver . Connect white coax to pre-wire coax for secondary receiver . Connect power cable to pre- wire power cable. See Figure 2.
7 Connecting two receivers 1. Connect the gray coax cable coming from the RoadT rip™ to the “SA TELLITE IN” input on the primary receiver . The primary receiver is the receiver used most often and will toggle between satellites.
8 Winegard Company • 3000 Kirkwood S treet • Burlington, IA 52601 • 319/754-0600 Fax 319/754-0787 • www .winegard.com Printed in U.S.A. © 2006, Winegard Company 2452086.
An important point after buying a device Winegard SD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Winegard SD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Winegard SD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Winegard SD you will learn all the available features of the product, as well as information on its operation. The information that you get Winegard SD will certainly help you make a decision on the purchase.
If you already are a holder of Winegard SD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Winegard SD.
However, one of the most important roles played by the user manual is to help in solving problems with Winegard SD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Winegard SD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
