Instruction/ maintenance manual of the product RP-RM46 Winegard
Go to page of 4
1 ® TURRET REPLACEMENT KIT RP-RM46 INSTALLATION INSTRUCTIONS for CRANK-UP SATELLITE ANTENNAS (Except Combination Mounts - RM-4610, etc.) Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 • 319/754-0600 • Fax 319/754-0787 * www.
2 CLAMP HUB TURRET BASE OUTER BEARING SCREWS (CLAMP) CRANK ASSEMBLY ELEVATE SHAFT GEAR SCREWS (TURRET) WORM SHAFT SPRING DIRECTIONAL HANDLE O-RING SPACER TURRET ASSEMBLY ROOF PLASTIC PLUG BACKUP FRAME ASSEMBLY SHAFT PIN (Referred to in #11.
3 Instructions for Cutting Directional Handle Length 1. Place nut on threaded rod. 2. Measure and cut threaded rod with hack saw. Use the chart, Figure 2, to deter- mine the length. 3. Remove the nut over cut end of threaded rod. This cleans the threads after cutting.
4 Refer to drawing to identify part s. STEP 1. Release spring at base of feed arm. (This allows you to remove elevating shaft and spring without the dish popping up.) Next, lower antenna to travel position. STEP 2. Loosen set screw on elevating crank handle.
An important point after buying a device Winegard RP-RM46 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Winegard RP-RM46 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Winegard RP-RM46 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Winegard RP-RM46 you will learn all the available features of the product, as well as information on its operation. The information that you get Winegard RP-RM46 will certainly help you make a decision on the purchase.
If you already are a holder of Winegard RP-RM46, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Winegard RP-RM46.
However, one of the most important roles played by the user manual is to help in solving problems with Winegard RP-RM46. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Winegard RP-RM46 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
